journal article·2014-01

Mechanical Properties and Dislocation Structure Evolution in Ti6Al7Nb Alloy Processed by High Pressure Torsion

Miloš Janeček, Josef Stráský, Jakub Čížek, Petr Harcuba, Kristína Václavová, Veronika V. Polyakova, Irina P. Semenova

Publisher page

Abstract

Ultrafine-grained biocompatible Ti-6Al-7Nb alloy was produced by high pressure torsion (HPT). Lattice defects—vacancies and dislocations—investigated by positron annihilation spectroscopy, observations by scanning electron microscopy, and microhardness evaluation are linked to the strain imposed by different numbers of HPT revolutions and to the distance from the specimen center. Positron annihilation spectroscopy showed significant increase of dislocation density and concentration of vacancy clusters after ½ of the HPT revolution. Microhardness increases by 20 pct with increasing strain, but it is heterogenous due to duplex microstructure. The heterogeneity of the microhardness increases with increasing strain, suggesting that a heavily deformed and fragmented α + β lamellar microstructure is more hardened than primary alpha grains. The defect structure is homogenous after ½ HPT revolution, while the microhardness becomes homogenous after 3 HPT revolutions only.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. M. Geetha, A.K. Singh, R. Asokamani and A.K. Gogia: Prog. Mater. Sci., 2009, vol. 54, pp. 397-425.10.1016/j.pmatsci.2008.06.004 ↗
2. C. Leyens and M. Peters: Titanium and Titanium Alloys, Wiley-VCH Verlag, 2003, pp. 423–51.10.1002/3527602119 ↗
3. K. S. Katti: Colloids Surf. B, 2004, vol. 39, pp. 133-42.10.1016/j.colsurfb.2003.12.002 ↗
4. M. Niinomi: J. Mech. Behav. Biomed. Mater., 2008, vol. 1, pp. 30-42.10.1016/j.jmbbm.2007.07.001 ↗
5. R.Z.Valiev and T.G. Langdon, Prog. Mater. Sci., 2006, vol. 51, pp. 881-981.10.1016/j.pmatsci.2006.02.003 ↗
6. A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp.893-979.10.1016/j.pmatsci.2008.03.002 ↗
7. H.S. Kim: J. Mater. Proc. Technol., 2001, vol. 113, pp. 622-26.10.1016/S0924-0136(01)00710-5 ↗
8. Y. Saito H. Utsunomiya, N. Tsuji and T. Sakai: Acta Mater., 1999, vol. 47, 579-83.10.1016/S1359-6454(98)00365-6 ↗
9. V.N. Varyutkhin, Y. Beygelzimer, S. Synkov and D. Orlov: Mater. Sci. Forum, 2006, vols. 503–504, pp. 335-38.10.4028/www.scientific.net/MSF.503-504.335 ↗
10. X. Yang, Y. Okabe, H. Miura, and T. Sakai: J. Mater. Sci., 2012, vol. 47, pp. 2823–30.10.1007/s10853-011-6111-6 ↗
11. Z. Horita, D.J. Smith, M. Furukawa, M. Nemoto, R.Z. Valiev and T.G. Langdon: J. Mater. Res., 1996, vol. 11, pp.1880-90.10.1557/JMR.1996.0239 ↗
12. R. Kužel, Z. Matěj, V. Cherkaska, J. Pešička, J. Čížek, I. Procházka and R.K. Islamgaliev: J. Alloys Compd., 2004, vol. 378, pp. 242-47.10.1016/j.jallcom.2003.12.048 ↗
13. M. Janeček, J. Čížek, M. Dopita, R. Král, and O. Srba: Mater. Sci. Forum, 2008, vols. 584–586, pp. 400–45.10.4028/www.scientific.net/MSF.584-586.440 ↗
14. Z. Matěj, R. Kužel, M. Dopita, M. Janeček, J. Čížek and T. Brunátová: Int. J. Mater. Res., 2009, vol. 100, pp. 880-83.10.3139/146.110112 ↗
15. R. Kužel, M. Janeček, Z. Matěj, J. Čížek, M. Dopita and O. Srba: Metall. Mater. Trans. A, 2010, vol 41A, pp. 1174-90.10.1007/s11661-009-9895-0 ↗
16. F. Bečvář, J. Čížek, I. Procházka and J. Janotová: Nucl. Instrum. Methods A, 2005, vol. 539, pp. 372-85.10.1016/j.nima.2004.09.031 ↗
17. F. Bečvář: Nucl. Instrum. Methods B, 2007, vol. 261, pp. 871-74.10.1016/j.nimb.2007.03.042 ↗
18. I. Procházka, I. Novotný and F. Bečvář: Mater. Sci. Forum, 1997, vols. 255–257, pp. 772-74.10.4028/www.scientific.net/MSF.255-257.772 ↗
19. V.V. Polyakova and I.P. Semenova: Modern Problems of Science and Education, 2012, vol. 6, in Russian.
20. J. Mueller, H.J. Rack, and L. Wagner: Ti-2007, Science and Technology, M. Niinomi, S. Akiyama, M. Hagiwara, M. Ikeda, and K. Maryama, eds., JIMIC 5, 2007, pp. 383–87.
21. R. Boyer, G. Welsh, and E. Collings: Material Properties Handbook—Titanium Alloys, ASM International, Materials Park, OH, 1994.
22. N. Poondla, T.S. Srivatsan. A. Patnaik, M. Petraroli, J Alloys Compd., 2009, vol. 486, pp. 162-67.10.1016/j.jallcom.2009.06.172 ↗
23. Y. Estrin, M. Janeček, G.I. Raab, R.Z. Valiev and A. Zi: Metall. Mater. Trans. A, 2007, vol. 38A, pp.1906-1909.10.1007/s11661-007-9120-y ↗
24. W.J. Kim and Y.K. Sa: Scripta Mater., 2006, vol. 54, pp. 1391-95.10.1016/j.scriptamat.2005.11.066 ↗
25. X. Ma, R. Lapovok, C. Gu, A. Molotnikov, Y. Estrin, E.V. Pereloma, C.H.J. Davies, and P.D. Hodgson: J. Mater. Sci., 2009, vol. 44, 3807-12.10.1007/s10853-009-3515-7 ↗
26. X.G. Qiao, N. Gao, Z. Moktadir, M. Kraft and M.J. Starink: J. Micromech. Microeng., 2010, vol. 20, 045029.10.1088/0960-1317/20/4/045029 ↗
27. J. Vrátná, M. Janeček, J. Čížek, D.J. Lee, E.Y. Yoon and H.S. Kim: J. Mater. Sci., 2013, DOI:10.1007/s10853-013-7151-x.10.1007/s10853-013-7151-x ↗
28. J. Čížek, M. Janeček, O. Srba, R. Kužel, Z. Barnovská, I. Procházka and S. Dobatkin: Acta Mater., 2011, vol 59, 2322-29.10.1016/j.actamat.2010.12.028 ↗
29. R. West: Positrons in Solids, Topics in Current Physics, P. Hautojärvi, ed., Springer, Berlin, 1979, pp. 89–115.10.1007/978-3-642-81316-0_3 ↗
30. J.M. Campillo Robles, E. Ogando, and F. Plazaola: J. Phys. Condens. Matter, 2007, vol. 19, 176222.10.1088/0953-8984/19/17/176222 ↗
31. P. Hautojärvi and C. Corbel: Proceedings of the International School of Physics “Enrico Fermi”, Course CXXV, A. Dupasquier and A.P. Mills, eds., IOS Press, Varena, 1995, pp. 491–506.
32. M. Mhaede, L. Wagner, and K. Ibrahim: Int. J. Mater. Res., 2013. doi:10.3139/146.110920.10.3139/146.110920 ↗
33. M. Zehetbauer: Key Eng. Mater., 1995, vols. 97-98, pp. 287–306.10.4028/www.scientific.net/KEM.97-98.287 ↗