journal article·2000-10

Microstructural development and austempering kinetics of ductile iron during thermomechanical processing

Jagadeesha Achary, Dev Venugopalan

Publisher page

Abstract

A new method of refining the microstructure of austempered ductile iron (ADI) by thermome chanical processing is investigated. Refinement of microstructure is effected by grain refinement of parent austenite by hot deformation in the austenitizing temperature range, before the austempering treatment. The effects of austenite deformation on the kinetics of austempering reaction and the microstructure development were studied using metallography and X-ray diffraction (XRD), at different austempering temperatures and deformations. The process window for optimum microstructure was determined in terms of the parameters involved. Deformation of 40 to 60 pct could be imparted in the temperature range 900 °C to 1025 °C, resulting in a reduction in the prior austenite grain size by 35 to 50 pct and ferrite size in ausferrite by 70 to 75 pct. The effects of austenitization temperature on the austempered microstructure were also studied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Ductile Iron Data for Design Engineers, Section IV, QIT-Fer et Titane Inc., Montreal, 1990.
2. R.B. Gundlach and J.F. Janowak: Proc. 1st Int. Conf. on Austempered Ductile Iron, ASM, Materials Park, OH, 1984, pp. 1–12.
3. K.L. Hayrynen, D.J. Moore, and K.B. Rundman: Michigan Technological University, Houghton, MI, private communication, 1993.
4. D.J. Moore, T.N. Rouns, and K.B. Rundman: AFS Trans., 1985, vol. 93, pp. 705–18.
5. K. Rundman, T. Rouns, W. Dubensky, and D. Moore: Proc. 2nd Int. Conf. on Austempered Ductile Iron, ASME Gear Research Institute, Naperville, IL, 1986, pp. 157–69.
6. R.C. Voigt, Y.H. Lee, and C.-H. Tu: Proc. 1991 World Conf. on Austempered Ductile Iron, AFS, Des Plaines, IL, 1991, pp. 479–515.
7. R.C. Voigt and C.R. Loper: J. Heat Treating, 1984, vol. 3, pp. 291–309.10.1007/BF02833124 ↗
8. B.V. Kovacs: AFS Trans., 1981, vol. 89, pp. 79–96.
9. B. Kovacs: Proc. 2nd Int. Conf. on ADI, ASME Gear Research Institute, Naperville, IL, 1986, pp. 291–96.
10. J.M. Schissler and J.P. Chobaut: Proc. 4th Int. Symp. on Physical Metallurgy of Cast Iron, Materials Research Society, Pittsburgh, PA, 1990, pp. 203–09.
11. B. Corlu, D. Venugopalan, and A. Alagarsamy: Proc. 2nd Int. Conf. on ADI, ASME Gear Research Institute, Naperville, IL, 1986, pp. 187–93.
12. S.-E. Stenfors, J. Storesun, and R. Sandstrom: Proc. 2nd Int. Conf. on ADI, ASME Gear Research Institute, Naperville, IL, 1986, pp. 227–36.
13. Y. Tanaka, H. Kamide, T. Hiraoka, and H. Kage: Proc. 4th Int. Symp. on Physical Metallurgy of Cast Iron, MRS, Pittsburgh, PA, 1990, pp. 235–42.
14. J.A. Sikora, H.A. Dall’O, and G. Uriburu, Jr.: Proc. 1991 World Conf. on ADI, AFS, Des Plaines, IL, 1991, pp. 75–88.
15. C.K. Syn, D.R. Lesuer, and O.D. Sherby: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1213–18.10.1007/s11661-997-0286-0 ↗
16. K.L. Hayrynen, S.M. Loftus, R.L. May, D.J. Moore, and K.B. Rundman: AFS Trans., 1995, vol. 103, pp. 157–63.
17. C.M. Burke, D.J. Moore, and K.B. Rundman: AFS Trans., 1998, vol. 106, pp. 91–97.
18. J.D. DeLa’O, C.M. Burke, B. Lagather, D.J. Moore, and K.B. Rundman: Proc. Symp. Thermomechanical Processing and Mechanical Properties of Hypereutectoid Steels and Cast Irons, TMS, Warrendale, PA, 1997, pp. 79–100.
19. T. Tanaka: Int. Met. Rev., 1981, vol 26, pp. 185–209.10.1179/imr.1981.26.1.185 ↗
20. H. Sekine, T. Maruyama, H. Kageyama, and Y. Kawashima: Proc. Int. Conf. on the Thermomechanical Processing of Microalloyed Austenite, TMS-AIME, Warrendale, PA, 1981, pp. 141–61.
21. L.J. Cuddy: Metall. Trans. A, 1981, vol. 12A, pp. 1313–20.10.1007/BF02642345 ↗
22. B.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley Publishing Company, Inc., Reading, MA, 1978.
23. K.B. Rundman and R.C. Klug: AFS Trans., 1982, vol. 90, pp. 499–508.
24. T.N. Rouns and K.B. Rundman: AFS Trans., 1987, vol. 95, pp. 851–74.