journal article·2009-01Open access

Interfacial Reactions in Model NiTi Shape Memory Alloy Fiber-Reinforced Sn Matrix “Smart” Composites

J.P. Coughlin, J.J. Williams, G.A. Crawford, N. Chawla

Abstract

In this article, the microstructure properties of a novel Pb-free solder composite were examined. A binary nickel-titanium shape memory alloy (SMA) fiber was used to reinforce the Sn-rich matrix, to take advantage of the superelastic properties of the fiber. The objective of this study was to understand long-term, high-temperature interfacial growth in a model NiTi fiber-reinforced Sn matrix composite solder system. The microstructure was quantified by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and wavelength dispersive spectroscopy (WDS). The mechanical properties of the interfacial zone, e.g., Young’s modulus and hardness, were characterized by nanoindentation. The evolution of the reaction products with time and the relationship between composition and local mechanical properties are discussed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Shape Memory Alloy Transformations · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. S. Kang, A.K. Sarkhel: J. Electron. Mater., 1994, vol. 23, p. 70110.1007/BF02651362 ↗
2. D.R. Frear, P.T. Vianco: Metall. Mater. Trans. A, 1994, vol. 25A, p. 150910.1007/BF02665483 ↗
3. J. Glazer: Int. Mater. Rev., 1995, vol. 40, p. 6510.1179/imr.1995.40.2.65 ↗
4. M. Abtew, G. Selvaduray: Mater. Sci. Eng. R, 2000, vol. 27, p. 9510.1016/S0927-796X(00)00010-3 ↗
5. W.J. Plumridge: Monatshefte Chem., 2005, vol. 136, p. 181110.1007/s00706-005-0377-9 ↗
6. P.T. Vianco, D.R. Frear: J. Electron. Mater., 1993, vol. 45, p. 14
7. S. Choi, K.N. Subramanian, J.P. Lucas, T.R. Bieler: J. Electron. Mater., 2000, vol. 29, p. 124910.1007/s11664-000-0020-9 ↗
8. S. Terashima, K. Yoshiharu, H. Takuya, T. Masamoto: J. Electron. Mater., 2003, vol. 32, p. 152710.1007/s11664-003-0125-z ↗
9. M.A. Meyers, K.K. Chawla: Mechanical Behavior of Materials, Prentice Hall, Upper Saddle River, NJ, 1999
10. K. Otsuka, C.M. Wayman: Shape Memory Materials, Cambridge University Press, Cambridge, United Kingdom, 1998
11. C.P. Frick, A.M. Ortega, J. Tyber, A. Maksound, H.J. Maier, Y. Liu, K. Gall: Mater. Sci. Eng. A, 2005, vol. 405, p. 3410.1016/j.msea.2005.05.102 ↗
12. A. Shimamoto, H.Y. Zhao, H. Abe: Int. J. Fatigue, 2004, vol. 26, p. 53310.1016/j.ijfatigue.2003.09.005 ↗
13. D. Vokoun, V. Kafka, C.T. Hu: Smart Mater. Struct., 2003, vol. 12, p. 68010.1088/0964-1726/12/5/303 ↗
14. M. Wagner, T. Sawaguchi, G. Kausträter, D. Höffken, G. Eggeler: Mater. Sci. Eng. A, 2004, vol. 378, p. 10510.1016/j.msea.2003.11.058 ↗
15. Z.G. Wang, X.T. Zua, Y.Q. Fub, L.M. Wang: Thermochimica Acta, 2005, vol. 428, p. 19910.1016/j.tca.2004.11.018 ↗
16. J.M. Young, K.J. Van Vliet: J. Biomed. Mater. Res., 2005, vol. 72, p. 1710.1002/jbm.b.30113 ↗
17. Y. Zheng, L. Cui, J. Schrooten: Appl. Phys. Lett., 2004, vol. 84, p. 3110.1063/1.1637958 ↗
18. L.C. Brinson, I. Schmidt, R. Lammering: J. Mech. Phys. Solids, 2004, vol. 52, p. 154910.1016/j.jmps.2004.01.001 ↗
19. Z.G. Wei, R. Sandstrom, S. Miyazaki: J. Mater. Sci., 1998, vol. 33, p. 376310.1023/A:1004674630156 ↗
20. I. Dutta, B.S. Majumdar, D. Pan, W.S. Horton, W. Wright, Z.X. Wang: J. Electron. Mater., 2004, vol. 33, p. 25810.1007/s11664-004-0131-9 ↗
21. Z.X. Wang, I. Dutta, B.S. Majumdar: Mater. Sci. Eng. A, 2006, vol. 421, p. 13310.1016/j.msea.2005.10.026 ↗
22. Z.X. Wang, I. Dutta, B.S. Majumdar: Scripta Mater., 2006, vol. 54, p. 62710.1016/j.scriptamat.2005.10.037 ↗
23. O. Fouassier, J. Chazelas, J. Silvain: Compos. Part A, 2002, vol. 33, p. 139110.1016/S1359-835X(02)00154-9 ↗
24. C.A. Anderson and M.F. Hasler: Proc. 4th Int. Conf. on X-ray Optics and Microanalysis, R. Castaing, P. Deschamps, and J. Philibert, eds., Hermann, Paris, 1966, pp. 310–27
25. W.C. Oliver, G.M. Pharr: J. Mater. Res., 2004, vol. 19, p. 310.1557/jmr.2004.19.1.3 ↗
26. C. Kuper, W. Peng, A. Pisch, F. Goesmann, R. Scmid-Fetzer: Z. Metallkd., 1998, vol. 89, p. 855
27. C. Liu, U.E. Klotz, P.J. Uggowitzer, J.F. Loeffler: Monatshefte Chem., 2005, vol. 136, p. 192110.1007/s00706-005-0392-x ↗
28. J.W. O’Brien, R.A. Dunlap, J.R. Dahn: J. Alloys Compd., 2003, vol. 353, p. 6010.1016/S0925-8388(02)01304-X ↗
29. D.C. Dunand, D. Mari, M.A.M. Bourke, J.A. Roberts: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2820–3610.1007/BF02652374 ↗
30. X. Deng, N. Chawla, K.K. Chawla, M. Koopman: Acta Mater., 2004, vol. 52, pp. 4291–430310.1016/j.actamat.2004.05.046 ↗