journal article·2011-12

Effect of Cyclic Oxidation Exposure on Tensile Properties of a Pt-Aluminide Bond-Coated Ni-Base Superalloy

Md. Zafir Alam, N. Hazari, Vijay K. Varma, Dipak K. Das

Publisher page

Abstract

The tensile behavior of a directionally solidified (DS) Ni-base superalloy, namely, CM-247LC, was evaluated in the presence of a Pt-aluminide bond coat. The effect of the thermal cycling exposure of the coated alloy at 1373 K (1100 °C) on its tensile properties was examined. The tensile properties were evaluated at a temperature of 1143 K (870 °C). The presence of the bond coating caused an approximately 8 pct drop in the strength of the alloy in the as-coated condition. However, the coating did not appreciably affect the tensile ductility of the substrate alloy. The bond coat prevented oxidation-related surface damage to the superalloy during thermal cycling exposure in air at 1373 K (1100 °C). Such cyclic oxidation exposure (up to 750 hours) did not cause any further reduction in yield strength (YS) of the coated alloy. There was a marginal decrease in the ultimate tensile strength (UTS) with increased exposure duration. Because of the oxidation protection provided by the bond coat, the drastic loss in ductility of the alloy, which would have happened in the absence of the coating, was prevented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. M.Z. Alam, D. Chatterjee, B. Venkataraman, V.K.Varma, and D.K. Das: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6211–18.10.1016/j.msea.2010.06.046 ↗
2. S. Bose: High Temperature Coatings, Butterworth-Heinemann Publishers, Oxford, United Kingdom, 2007, pp. 71–154.10.1016/B978-075068252-7/50007-X ↗
3. R. Pichoir: in Materials and Coatings to Resist High Temperature Corrosion, D.R. Holmes and A. Rahmel, eds., Applied Science Publishers, London, 1978, pp. 271–90.
4. A. Strang and E. Lang: in High Temperature Alloys for Gas Turbines, R. Brunetand, ed., D. Reidel Publishing Company, Holland, 1982, pp. 469–506.10.1007/978-94-009-7907-9_19 ↗
5. M.S. Farrell, D.H. Boone, and R. Streiff: Surf. Coat. Technol., 1987, vol. 32 (1–4), pp. 69–84.10.1016/0257-8972(87)90098-3 ↗
6. J.H. Sun, H.C. Jang, and E. Chang: Surf. Coat. Technol., 1994, vol. 64 (3), pp. 195–203.10.1016/0257-8972(94)90107-4 ↗
7. D.K. Das, V. Singh, and S.V. Joshi: JOM-e, 2000, vol. 52(1) (source:http://www.tms.org/pubs/journals/JOM/0001/Das/Das-0001.html).10.1007/s11837-000-0173-2 ↗
8. D.K. Das, M. Roy, V. Singh, and S.V. Joshi: Mater. Sci. Technol., 1999, vol. 15, pp. 1199–1208.10.1179/026708399101505112 ↗
9. H. Svensson, M. Christensen, P. Knutsson, G. Wahnström, and K. Stiller: Corr. Sci., 2009, vol. 51, pp. 539–46.10.1016/j.corsci.2008.12.016 ↗
10. A.L. Purvis and B.M. Warnes: Surf. Coat. Technol., 2001, vols. 146–147, pp. 1–6.10.1016/S0257-8972(01)01362-7 ↗
11. H.M. Tawancy, A. UI-Hamid, N.M. Abbas, and M.O. Aboelfotoh: J. Mater. Sci., 2008, vol. 43, pp. 2978–89.10.1007/s10853-007-2130-8 ↗
12. G.J. Tatlock, T.J. Hurd, and J.S. Punni: Platinum Met. Rev., 1987, vol. 31, pp. 26–31.10.1595/003214087X3112631 ↗
13. J.H.W. de Wit and P.A. van Manen: Mater. Sci. Forum, 1994, vol. 154, pp. 109–18.10.4028/www.scientific.net/MSF.154.109 ↗
14. G.W. Goward and D.H. Boone: Oxid. Met., 1971, vol. 3, pp. 475–95.10.1007/BF00604047 ↗
15. J. Angenete and K. Stiller: Surf. Coat. Technol., 2002, vol. 150, pp. 107–18.10.1016/S0257-8972(01)01544-4 ↗
16. D.K. Das, V. Singh, and S.V. Joshi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2037–45.10.1007/s11661-000-0231-y ↗
17. D.K. Das, V. Singh, and S.V. Joshi: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2173–88.10.1007/s11661-998-0042-0 ↗
18. R. Lowrie and D.H. Boone: Thin Solid Films, 1977, vol. 45, pp. 491–98.10.1016/0040-6090(77)90236-X ↗
19. D. Vogel, L. Newman, P. Deb, and D.H. Boone: Mater. Sci. Eng., 1987, vol. 88, pp. 227–31.10.1016/0025-5416(87)90089-9 ↗
20. M. Eskner and R. Sandstrom: Surf. Coat. Technol., 2003, vol. 165, pp. 71–80.10.1016/S0257-8972(02)00702-8 ↗
21. D. Pan, M.W. Chen, P.K. Wright, and K.J. Hemker: Acta Mater., 2003, vol. 51, pp. 2205–17.10.1016/S1359-6454(03)00014-4 ↗
22. M.Z.Alam, D. Chatterjee, V. Jayaram, S.V. Kamat, and D.K. Das: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7147–50.10.1016/j.msea.2010.07.059 ↗
23. K. Schneider and H.W. Grunling: Thin Solid Films, 1983, vol. 107, pp. 395–416.10.1016/0040-6090(83)90302-4 ↗
24. J.M. Veys and R. Mevrel: Mater. Sci. Eng., 1987, vol. 88, pp. 253–60.10.1016/0025-5416(87)90093-0 ↗
25. R. Nützel, E. Affeldt, and M. Göken: Int. J. Fatigue, 2008, vol. 30, pp. 313–17.10.1016/j.ijfatigue.2007.01.045 ↗
26. H.J. Kim and M.E. Walter: Mater. Sci. Eng. A, 2003, vol. 360 (1–2), pp. 7–17.10.1016/S0921-5093(02)00733-5 ↗
27. J.H. Chen and J.A. Little: Surf. Coat. Technol., 1997, vol. 92 (1–2), pp. 69–77.10.1016/S0257-8972(96)03117-9 ↗
28. R. Molins and P.Y. Hou: Surf. Coat. Technol., 2006, vol. 201, pp. 3841–45.10.1016/j.surfcoat.2006.07.251 ↗
29. M.W. Chen, M.L. Glynn, R.T. Ott, T.C. Hufnagel, and K.J. Hemker: Acta Mater., 2003, vol. 51 (14), pp. 4279–94.10.1016/S1359-6454(03)00255-6 ↗
30. G. Xie, J. Zhang, and L.H. Lou: Scripta Mater., 2008, vol. 59, pp. 858–61.10.1016/j.scriptamat.2008.06.032 ↗
31. J.M. Oblak and W.A. Owczarski: TMS-AIME, 1968, vol. 242, pp. 1563–67.
32. M. Dahlen and L. Winberg: Acta Mater., 1980, vol. 28, pp. 41–50.10.1016/0001-6160(80)90039-5 ↗
33. M.Z. Alam, B. Srivathsa, S.V. Kamat, V. Jayaram, N. Hazari, and D.K. Das: Mater. Sci. Eng. A, 2010, vol. 527 (3), pp. 842–48.10.1016/j.msea.2009.09.017 ↗
34. M.Z. Alam, B. Srivathsa, S.V. Kamat, V. Jayaram, and D.K. Das: Mater. Des., 2011, vol. 32, pp. 1242–52.10.1016/j.matdes.2010.10.003 ↗
35. Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, 2008, pp. 1–25 (source: www.astm.org, accessed 7 Aug. 2008).
36. D. Pan, M.W. Chen, P.K. Wright, and K.J. Hemker: Acta Mater., 2003, vol. 51, pp. 2205–17.10.1016/S1359-6454(03)00014-4 ↗
37. C.T. Sims, N.S. Stoloff, and W.C. Hagel: Superalloys II, John Wiley and Sons, New York, NY, 1987, pp. 150–220.
38. C. Wagner: Z. Elektrochem., 1961, vol. 65, pp. 581–91.
39. B. Reppich: Acta Metall., 1982, vol. 30, pp. 87–94.10.1016/0001-6160(82)90048-7 ↗
40. G.E. Dieter: in Fracture, D. Bacon (adapted), Mechanical Metallurgy, McGraw Hill Book Company, Singapore, 1988, pp. 262–65.
41. R.E. Hook and J.P. Hirth: Acta Metall., 1967, vol. 15, pp. 535–51.10.1016/0001-6160(67)90087-9 ↗
42. A. Sreeramamurthy, H. Margolin, C.A. Greene, B.W. Neuberger, and P.G. Oberson: Prog. Mater. Sci., 2006, vol. 51, pp. 632–709.10.1016/j.pmatsci.2005.10.003 ↗
43. T. Sakata, H.Y. Yasuda, and Y. Umakoshi: Acta Mater., 2003, vol. 51, p. 1561–72.10.1016/S1359-6454(02)00558-X ↗
44. R.D. Noebe, R.R. Bowman, and M.V. Nathal: Int. Mater. Rev., 1993, vol. 38 (4), pp. 193–231.10.1179/imr.1993.38.4.193 ↗