journal article·2015-05

Microstructural Characterization and Mechanical Properties Analysis of Weld Metals with Two Ni Contents During Post-Weld Heat Treatments

Da-yong Wu, Xiu-lin Han, Hong-tao Tian, Bo Liao, Fu-ren Xiao

Publisher page

Abstract

This study designed post-weld heat treatments, including reheating and tempering, associated with hot bending to investigate the microstructures, toughness, and hardness of two weld metals with different Ni contents (<1 wt pct level). The results indicated that a high Ni content decreased the ferrite transformation temperature and increased the proportion of acicular ferrite (AF). Furthermore, a high Ni content promoted the martensite/austenite (M/A) constituent formation after reheating. The promotion of the M/A formation increased the number of cementite particles, and accelerated cementite coarsening during tempering. The large-angle grain boundary density from the AF improved the toughness despite the negative effect of cementite. The strengthening contributions were calculated, and the grain refinement was the greatest. The high Ni content decreased the effective grain size with a 2 deg tolerance angle, thus enhancing the grain refinement contribution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. F. Grimpe, S. Meimeth, H. Meuser, E. Muthmann, A. Liessem, and C. Stallybrass: Proceedings of the International Conference on New Developments on Metallurgy and Applications of High Strength Steels. Buenos Aires, 2008. vol. 1. pp. 493–506.
2. W. Wang, Y.Y. Shan, K. Yang: Mater. Sci. Eng. A, 2009, vol. 502, pp. 38-44.10.1016/j.msea.2008.10.042 ↗
3. D. Boyd, I. Yakubtsov, R. Zhang, P. Poruks: in: W. Chen (Ed.), Pipelines for the 21st Century, CIM, Montreal, 2005, p. 63.
4. F.R. Xiao, B. Liao, D.L. Ren, Y.Y. Shan, K. Yang: Mater. Charact., 2005, vol. 54, pp. 305-314.10.1016/j.matchar.2004.12.011 ↗
5. J. Xu, R.D.K. Misra, B. Guo, Z. Jia, L. Zheng: Mater. Sci. Eng. A, 2013, vol. 574, pp. 94-103.10.1016/j.msea.2013.03.017 ↗
6. C.P. Reip, S. Shanmugam, R.D.K. Misra: Mater. Sci. Eng. A, 2006, vol. 424, pp. 307-317.10.1016/j.msea.2006.03.026 ↗
7. X.W. Chen, G.Y. Qiao, X.L. Han, X. Wang, F.R. Xiao, B. Liao: Mater. Des., 2014, vol. 53, pp. 888-901.10.1016/j.matdes.2013.07.037 ↗
8. N.C. Tang: Int. J. Pres. Ves. Pip., 2000, vol. 77, pp. 751-759.10.1016/S0308-0161(00)00061-2 ↗
9. R.A. Silva: Correlation Between the Induction Hot Bending Parameters for API X80 Pipe and the Resulting Mechanical Properties, p.81 (M.Sc. Dissertation), DEMA, PUC-Rio, 2009.
10. Z. Zhang and R.A. Farrar: Weld. J., 1997, vol. 76, pp. 183-196.
11. B.Y. Kang, H.J. Kim, S.K. Hwang: ISIJ Int., 2000, vol. 40, pp. 1237-1245.10.2355/isijinternational.40.1237 ↗
12. V.B. Trindade, J.C. Payao, L.F.G. Souza, R.R. Paranhos: Exacta, São Paulo, 2007, vol. 5, pp. 177-183.
13. X.L. Han, X.L. Min, G.P. Li, and Y.Y. Yang: China, CN 103240512 A, 2013-08-14.
14. M. Hillert: Metall. Trans. A, 1984, vol. 15A, pp. 411-419.10.1007/BF02644964 ↗
15. S. Shanmugam, R.D.K. Misra, J. Hartmann, S.G. Jansto: Mater. Sci. Eng. A, 2006, vol. 441, pp. 215-229.10.1016/j.msea.2006.08.017 ↗
16. J.M. Gregg, H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1603-1611.10.1007/BF02668526 ↗
17. J.L. Lee, M.H. Hon, G.H. Cheng: J. Mater. Sci., 1987, vol. 22, pp. 2767-2777.10.1007/BF01086469 ↗
18. L.J. Habraken and M. Economopolus: Transformation and Hardenability in Steels, Climax Molybfenum, Ann Arbor, Michigan, USA, 1967, p. 69-107.
19. Tenuta-Azevedo and Galvao-da-Silva: Scripta Metall. 1978, pp. 113–17.10.1016/0036-9748(78)90146-1 ↗
20. A.M. Guo, R.D.K. Misra, J. Xu, B. Guo, S.G. Jansto: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3886-3892.10.1016/j.msea.2010.02.067 ↗
21. H. Kestenbach: Mater. Sci. Technol., 1997, vol. 13, pp. 731-739.10.1179/mst.1997.13.9.731 ↗
22. L. Fan, T.L. Wang, Z.B. Fu, S. Zhang, Q.F. Wang: Mater. Sci. Eng. A, 2014, vol. 607, pp. 559-568.10.1016/j.msea.2014.04.027 ↗
23. M. Díaz-Fuentes, A. Iza-Mendia, I. Gutiérrez: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2505-2516.10.1007/s11661-003-0010-7 ↗
24. K.B. Kang, S.H. Chon, and J.Y. Yoo: Proceedings of the Twenty-second (2012) International Offshore and Polar Engineering Conference, Rhodes, Greece, 2012. pp. 17–22
25. A. Iza-Mendia, I. Gutiérrez: Mater. Sci. Eng. A, 2013, vol. 561, pp. 40-51.10.1016/j.msea.2012.10.012 ↗
26. G.M. Evans: Weld. Res. Abroad, 1991, vol. 41, pp. 70-83.
27. Y.M. Kim, H. Lee, N.J. Kim, and J.Y. Yoo: The Fifteenth International Offshore and Polar Engineering Conference, Seoul, Korea, 2005. pp. 19–24
28. B. Demir, M. Erdoğan: J. Mater. Process. Technol., 2008, vol. 208, pp. 75-84.10.1016/j.jmatprotec.2007.12.094 ↗
29. R. Wagner, R. Kampmann, and P. Hassen eds.: Mater. Sci. Technol., Vol. 5: Phase Transformations in Materials, 5th ed., p. 213, VCH Verlagsgesellschaft, Weinheim, 1991.
30. C. Blais, G. L’Esperance, G.M. Evans: Sci. Technol. Weld. Join., 1999, vol. 4, pp. 143-150.10.1179/136217199101537680 ↗
31. T. Suzuki, J. Inoue, and T. Koseki: Proceedings of the 8th International Conference, ASM International, Material Park, Ohio, 2009, pp. 292–295.
32. T. Gladman: The physical metallurgy of microalloyed steels, 1st ed., The University Press, Cambridge 1997.
33. J. Hu, L.X. Du, J.J. Wang, H. Xie, C.R. Gao, R.D.K. Misra: Mater. Sci. Eng. A, 2014, vol. 590, pp. 323-328.10.1016/j.msea.2013.10.062 ↗
34. Y. Funakawa, T. Shiozaki, K. Tomita, T. Yamamoto, E. Maeda: ISIJ Int., 2004, vol. 44, pp. 1945-1951.10.2355/isijinternational.44.1945 ↗
35. W.K. Kim, H.G. Jung, G.T. Park, S.U. Koh, K.Y. Kim: Scripta Mater., 2010, vol. 62, pp. 195-198.10.1016/j.scriptamat.2009.10.028 ↗
36. I.A. Yakubtsov, P. Poruks, J.D. Boyd: Mater. Sci. Eng. A, 2008, vol. 480, pp. 109-116.10.1016/j.msea.2007.06.069 ↗
37. M. Gomez, P. Valles, S.F. Medina: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4761-4773.10.1016/j.msea.2011.02.087 ↗
38. T. Gladman, D. Dulieu, I.D. McIvor: Microalloying, Union Carbide Corporation, New York, 1977.
39. E.V. Morales, R.A. Silva, I.S. Bott, S. Paciornik: Mater. Sci. Eng. A, 2013, vol. 585, pp. 253-260.10.1016/j.msea.2013.07.060 ↗
40. E. Demir, D. Raabe, N. Zaafarani, S. Zaefferer: Acta Mater., 2009, vol. 57, pp. 559-569.10.1016/j.actamat.2008.09.039 ↗
41. M. Olasolo: Ph.D. Thesis, Tecnun (University of Navarra) 2011.
42. S.J. Kim, H.G. Jung, K.Y. Kim: Scripta Mater., 2012, vol. 67, pp. 895-898.10.1016/j.scriptamat.2012.08.021 ↗