Deformation, residual stress, and constitutive relations for quenched W319 aluminum
Source abstract
Abstract
A study of the development of deformation and transient and residual stresses during quenching in aluminum alloy W319 is presented. Rapid tension tests were performed on W319 in the super-saturated solution state at several temperatures and strain rates. A material model following the mechanical threshold stress (MTS)-Voce formulation is developed and implemented in both a simple one-dimensional code and a fully three-dimensional form as a user material subroutine in ABAQUS. The results of the tension tests are used to determine the parameters in the thermomechanical constitutive model. Unidirectional beam quenching experiments are performed to test the applicability of the constitutive model. Residual stresses in the beams are measured using a groove removal technique upon completion of the quenching process. Residual stress and deformation results from beam quenching experiments compare well to the analytical results computed using the constitutive model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. B. Aksel: Ph.D. Thesis, Cornell University, Ithaca, NY, 1990.
2. B. Aksel, W. Arthur, and S. Mukherjee: J. Eng. Industry, 1992, vol. 114, pp. 309–16.10.1115/1.2899797 ↗
3. R. Becker, M. Karabin, J. Liu, and R. Smelser: Trans. ASME: J. Appl. Mech., 1996, vol. 63, pp. 699–705.10.1115/1.2823352 ↗
4. M. Karabin, R. Becker, and P. Vranka: The Integration of Material, Process and Product Design, Balkema, Rotterdam, The Netherlands, 1999, pp. 129–37.
5. D. Slavik and H. Sehitoglu: Thermal Stress, Material Deformation, and Thermo-Mechanical Fatigue, ASME PVP, New York, 1987, vol. 123, pp. 65–74.
6. P. Follansbee and U. Kocks: Metall. Trans. A, 1988, vol. 19A, pp. 81–93.10.1016/0001-6160(88)90030-2 ↗
7. S. Chen, M. Stout, U. Kocks, S. MacEwen, and A. Beaudoin: in Hot Deformation of Aluminum Alloys II, T.R. Bieler, L.A. Lalli, and S.R. MacEwen, eds., TMS-AIME, Warrendale, PA, 1998, pp. 205–16.
8. C. MacGregor and J. Fisher: Trans. ASME: J. Appl. Mech., 1946, vol. 13 (1), pp. 11–16.10.1115/1.4009510 ↗
9. E. Voce: J. Inst. Met., 1948, vol. 74, pp. 537–62.
10. E. Voce: Metallurgica, 1955, vol. 51, pp. 219–25.
11. M. Newman: Ph.D. Thesis, University of Illinois, Urbana-Champaign, Urbana, IL, 2001.
12. T.J. Smith, H.J. Maier, H. Sehitoglu, E. Fleury, and J.A. Allison: Metal. Mater. Trans. A, 1999, vol. 30A, pp. 133–46.10.1007/s11661-999-0201-y ↗
13. A.H. Cottrell and M.A. Jaswon: Proc. R. Soc. A, 1949, vol. 199, pp. 104–14.
14. J. Dantzig: Rev. Scientific Instrum., 1985, vol. 56 (5), pp. 723–25.10.1063/1.1138214 ↗
15. G. Vanderplaats: Numerical Optimization Techniques for Engineering Design: With Applications, McGraw-Hill Book Company, New York, NY, 1984.
16. A. Mendelson: Plasticity: Theory and Applications, Robert E. Krieger Publishing Company, 1968.
17. B. Boley and J. Weiner: Theory of Thermal Stresses, Dover Publications, Inc., New York, 1960.
18. D. Leeser and R. Danne: Proc. Society for Experimental Stress Analysis, 1954, vol. 12 (1), pp. 203–08.
19. C. Cloutier, P. Reeber-Schmanski, J. Jones, and J. Allison: in Automotive Alloys 1999, S. Das, ed., TMS-AIME, Warrendale, PA, 1999, pp. 153–160.
20. H. Shercliff and M. Ashby: Acta Metall. Mater., 1990, vol. 38 (10), pp. 1789–1802.10.1016/0956-7151(90)90291-N ↗