Analyses of Transformation Kinetics of Carbide-Free Bainite Above and Below the Athermal Martensite-Start Temperature
Source abstract
Abstract
The isothermal transformation kinetics of austenite decomposition in Fe-0.4C-2.78Mn-1.81Si was analyzed by an electrical resistivity technique in the temperature interval 723 K to 418 K (450 °C to 145 °C). The analysis of transformation kinetics of the bainite transformation was performed using the Johnson–Mehl–Avrami–Kolgomorov (JMAK) and Austin–Rickett (AR) approaches. The kinetic parameters, the reaction constant n, rate constant k = k(T), and apparent activation energy Q were evaluated for isothermal transformations below and above the martensite-start temperature MS = 548 K (275 °C), which was determined experimentally. The formation of strain-induced martensite, which starts to accompany the bainite transformation at just above MS, increases the rate of transformation and decreases the apparent activation energy of austenite decomposition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. H.K.D.H. Bhadeshia and D.V. Edmonds: Met. Sci., 1983, vol. 17, pp. 411–20.10.1179/030634583790420600 ↗
2. F.G. Caballero and H.K.D.H. Bhadeshia: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 251–57.10.1016/j.cossms.2004.09.005 ↗
3. O.N. Mohanaty and A.N. Bhagat: Mat.-wiss. Werkstofftech., 2003, vol. 34, pp. 96–101.10.1002/mawe.200390024 ↗
4. S.V. Radcliffe and E.C. Rollason: J. Iron Steel Inst., 1959, vol. 191, pp. 56–65.
5. P.W. Brown and D. Mack: Metall. Trans., 1973, vol. 4, pp. 2639–43.10.1007/BF02644269 ↗
6. O. Schaaber: Trans. AIME, 1955, vol. 203, pp. 559–60.
7. R.T. Howard and M. Cohen: Trans. AIME, 1949, vol. 176, pp. 384–97.
8. M.F. Smith, G.R. Speich, and M. Cohen: Trans. TMS AIME, 1959, vol. 215, pp. 528–30.
9. N.F. Kennon and R.T. Edwards: J. Aust. Inst. Met., 1970, vol. 15, pp. 195–200.
10. T.Z. Wozniak: Mater. Charact., 2008, vol. 59, pp. 708–16.10.1016/j.matchar.2007.06.004 ↗
11. M. Oka and H. Okamoto: Metall. Trans. A, 1985, vol. 19A, pp. 447–52.
12. L.C. Chang: Mater. Sci. Eng., 2004, vol. A368, pp. 175–82.10.1016/j.msea.2003.10.297 ↗
13. G.R. Purdy and M. Hillert: Acta Metall., 1984, vol. 32, pp. 823–28.10.1016/0001-6160(84)90018-X ↗
14. H.K.D.H. Bhadeshia and D.V. Edmonds: Metall. Trans. A, 1979, vol. 10A, pp. 895–907.10.1007/BF02658309 ↗
15. G.R. Speich and M. Cohen: Trans. TMS-AIME, 1960, vol. 218, pp. 1050–59.
16. M.J. Hawkins and J. Barford: Scripta Mater., 1970, vol. 4, pp. 583–88.10.1016/0036-9748(70)90152-3 ↗
17. H.K.D.H. Bhadeshia: J. Phys., 1982, Coll. C4, Suppl. 12, pp. C4-443–C4-448.10.1051/jphyscol:1982468 ↗
18. M. Umemo, K.H. Uchi, and I. Tamura: Trans. ISIJ, 1982, vol. 22, pp. 854–61.10.2355/isijinternational1966.22.854 ↗
19. D. Quidort and Y.J.M. Brechet: ISIJ Int., 2002, vol. 42 (9), pp. 1010–17.10.2355/isijinternational.42.1010 ↗
20. J.W. Elmer, T.A. Palmer, S.S. Babu, W. Zhang, and T. DebRoy: Weld. J., 2004, Sept., pp. 244–53.
21. S.M.C. van Bohemen, M.J. Santofimia, and J. Sietsma: Scripta Mater., 2008, vol. 58, pp. 488–91.10.1016/j.scriptamat.2007.10.045 ↗
22. N.V. Luzginova, L. Zhao, and J. Sietsma: Mater. Sci. Eng., 2008, vols. A481–482, pp. 766–69.10.1016/j.msea.2006.11.173 ↗
23. M. Niewczas, Z.S. Basinski, S.J. Basinski, and J.D. Embury: Phil. Mag., 2001, vol. 81A, pp. 1121–38.10.1080/01418610108214432 ↗
24. General Area Detector Diffraction System (GADDS), Version 4.0, User’s Manual, Bruker AXS Inc., Madison, WI, 1999.
25. K.W. Andrews: JISI, 1965, vol. 203, pp. 721–27.
26. D.J. Dyson and B. Holmes: JISI, 1970, vol. 208, pp. 469–74.
27. I.S. Servi and D. Turnbull: Acta Metall., 1966, vol. 14, pp. 161–69.10.1016/0001-6160(66)90297-5 ↗
28. E.-S. Lee and Y.G. Kim: Acta Metall. Mater., 1990, vol. 38, pp. 1669–76.10.1016/0956-7151(90)90009-6 ↗
29. W.A. Johnson and K.E. Mehl: Trans. Am. Inst. Min. Met. Enf., 1939, vol. 195, pp. 416–58.
30. M. Avrami: J. Chem. Phys., 1941, vol. 9, pp. 177–84.10.1063/1.1750872 ↗
31. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103–12.10.1063/1.1750380 ↗
32. M. Avrami: J. Chem. Phys., 1940, vol. 8, pp. 212–24.10.1063/1.1750631 ↗
33. A.N. Kolgomorov: Izv. Akad. Nauk SSSR, Ser. Mater., 1937, vol. 1, pp. 355–59.
34. J.B. Austin and R.L. Rickett: Trans. Am. Inst. Eng., 1939, vol. 135, pp. 396–415.
35. G.B. Olson and M. Cohen: J. Less-Common Met., 1972, vol. 28, pp. 107–18.10.1016/0022-5088(72)90173-7 ↗
36. G. Ghosh and G.B. Olson: Acta Metall. Mater., 1994, vol. 42, pp. 3361–70.10.1016/0956-7151(94)90468-5 ↗
37. E. Swallow and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1996, vol. 12, pp. 121–25.10.1179/mst.1996.12.2.121 ↗
38. J.W. Christian: Theory of Phase Transformation in Metals and Alloys, Pergamon Press, Oxford, United Kingdom, 2004, pp. 529–46.
39. M. Hillert: Acta Metall., 1959, vol. 7, pp. 653–58.10.1016/0001-6160(59)90141-5 ↗
40. G.V. Kurdjumov and O.P. Maksimova: Dokl. Akad. Nauk SSSR, 1948, vol. 61, pp. 83–93.
41. G.V. Kurdjumov and O.P. Maksimova: Dokl. Akad. Nauk SSSR, 1950, vol. 73, pp. 95–98.
42. S.R. Pati and M. Cohen: Acta Metall., 1971, vol. 19, pp. 1327–32.10.1016/0001-6160(71)90069-1 ↗
43. C.T. Peters, P. Bolton, and A.P. Miodownik: Acta Metall., 1972, vol. 20, pp. 881–86.10.1016/0001-6160(72)90081-8 ↗
44. S.K. Gupta and V. Raghavan: Acta Metall., 1975, vol. 23, pp. 1239–45.10.1016/0001-6160(75)90042-5 ↗
45. C. Wells, W. Barz, and R.F. Mehl: Trans. AIME, 1950, vol. 188, pp. 553–60.
46. H. Sueyoshi and K. Suenaga: J. Jpn. Inst. Met., 1987, vol. 51, pp. 518–24.10.2320/jinstmet1952.51.6_518 ↗
47. U. Bohnenkamp, R. Sandstrom, and G. Grimvall: J. Appl. Phys., 2002, vol. 92, pp. 4402–07.10.1063/1.1502182 ↗