journal article·2006-03

Orientation relationships associated with austenite formation from ferrite in a coarse-grained duplex stainless steel

E. F. Monlevade, I. G. S. Falleiros

Publisher page

Abstract

Studies on the morphology and crystallography of austenite precipitated from ferrite were performed in an Fe-22.5 pct Cr-4.7 pct Ni-3 pct Mo-duplex stainless steel. Samples were solution treated at 1325°C (yielding a grain size of approximately 2 mm), water quenched, and then aged at temperatures ranging from 700 °C to 1100 °C for times ranging from 5000 to 30,000 seconds. The morphology of grain boundary precipitates depends on the grain boundary segment at which the precipitates are formed, and may be adequately described by the Dubé classification system. Orientation relationships (ORs) between austenite and the ferritic matrix were determined with electron backscattered diffraction (EBSD) analysis, employing graphic and algebraic methods. Grain boundary precipitates exhibited Kurdjumov-Sachs (K-S) or Nishyiama-Wassermann (N-W) ORs with at least one of the adjacent grains, and in some cases relationships intermediate between K-S and N-W appeared. In approximately 60 pct of the cases examined, grain boundary precipitates show K-S or N-W ORs with both grains forming a boundary, though with small deviations (up to 5 deg) from the exact relationships.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. E. Snape and N.L. Church: JOM, 1972, vol. 24 (1), pp. 23–29.10.1007/BF03355754 ↗
2. G. Miyamoto, T. Shinyoshi, J. Yamaguchi, T. Furuhara, T. Maki, and R. Uemori: Scripta Mater., 2003, vol. 48, pp. 371–77.10.1016/S1359-6462(02)00451-7 ↗
3. T. Furuhara, T. Shinyoshi, G. Miyamoto, J. Yamaguchi, N. Sugita, N. Kimura, N. Takemura, and T. Maki: Iron Steel Inst. Jpn. Int., 2003, vol. 43 (12), pp. 2028–37.10.2355/isijinternational.43.2028 ↗
4. R.F. Mehl and O.T. Marzke: Trans. AIME, 1931, vol. 93, pp. 123–61.
5. C.S. Smith and W.E. Lindlief: Trans. AIME, 1933, vol. 69, pp. 104–23.
6. H. Hu: Trans. AIME, 1965, vol. 233, pp. 1071–75.
7. K. Ameyama, T. Maki, and I. Tamura: J. Jpn. Inst. Met., 1986, vol. 50 (1), pp. 10–19.10.2320/jinstmet1952.50.1_10 ↗
8. K. Ameyama, T. Maki, and I. Tamura: J. Jpn. Inst. Met., 1986, vol. 50 (7), pp. 602–11.10.2320/jinstmet1952.50.7_602 ↗
9. A.D. King and T. Bell: Metall. Trans. A, 1975, vol. 6A, pp. 1419–29.10.1007/BF02641934 ↗
10. H. Fujiwara, T. Maeda, and K. Ameyama: J. Jpn. Inst. Met., 1999, vol. 63 (9), pp. 1165–74.10.2320/jinstmet1952.63.9_1165 ↗
11. M. Hillert: Decomposition of Austenite by Diffusional Processes, V.F. Zachay and H.I. Aaronson, eds., Interscience Publishers, New York, NY, 1962, pp. 197–237.
12. M.A. Mangan and G.J. Shiflet: Scripta Mater., 1998, vol. 39, pp. 763–70.10.1016/S1359-6462(98)00231-0 ↗
13. M.A. Mangan and G.J. Shiflet: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2767–81.10.1007/s11661-999-0114-9 ↗
14. J.S. Kallend, P.P. Morris, and G.J. Davies: Acta Metall., 1976, vol. 24, pp. 361–70.10.1016/0001-6160(76)90011-0 ↗
15. G.J. Davies, J.S. Kallend, and P.P. Morris: Acta Metall., 1976, vol. 24 (2), pp. 159–72.10.1016/0001-6160(76)90019-5 ↗
16. E. Behara and B. Shpigler: Color Metallography, ASM, Metals Park, OH, 1977, p. 164.
17. J.-O. Nilsson: Mater. Sci. Technol., 1992, vol. 8, pp. 685–700.10.1179/mst.1992.8.8.685 ↗
18. S. Kobayashi, K. Nakai, and Y. Ohmori: Acta Mater., 2001, vol. 49, pp. 1891–902.10.1016/S1359-6454(01)00115-X ↗
19. J.C. Lippold, Varol, and W.A. Baeslack III: Proc. Duplex Stainless Steels 1991.
20. A.J. Ramirez, J.C. Lippold, and S.D. Brandi: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1575–97.10.1007/s11661-003-0304-9 ↗
21. C.A. Dubé, H.I. Aaronson, and R.F. Mehl: Rev. Metall., 1958, vol. 55, pp. 201–10.10.1051/metal/195855030201 ↗
22. S.D. Brandi and A.F. Padilha: Proc. II Seminário Brasileiro do Aço Inoxidável. Inox 90, Brazil, 1990, pp. 135–52.
23. J.F. Nie: Acta Mater., 2004, vol. 52, pp. 795–807.10.1016/j.actamat.2003.10.019 ↗