journal article·2006-10

A novel approach to the determination of the threshold for stress corrosion cracking (K ISCC) using round tensile specimens

R. K. Singh Raman, R. Rihan, R. N. Ibrahim

Publisher page

Abstract

This article discusses determination of threshold stress intensity for propagation of stress corrosion cracking (KISCC), using circumferential notch tensile (CNT) specimens. Use of round tensile specimens is a novel and cost-advantageous approach to determination of KISCC. However, compliance of this specimen geometry to the constraints for application of linear elastic fracture mechanics (LEFM) has traditionally been argued, and hence this aspect is addressed in detail. The LEFM suits best the materials that undergo brittle cracking, and hence a highly brittle material, cast iron, has been selected as the test material. However, susceptibility of this material to caustic embrittlement has been established employing another technique, viz. slow strain rate testing and fractography of the specimens. Using CNT specimens, KISCC has been determined for the cast iron in hot caustic solutions, and the features of intergranular caustic cracking and secondary cracking have been established using scanning electron microscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. J. Sedriks: Publications of National Association of Corrosion Engineers, NACE, Houston, TX, 1990.
2. Proc. Environment-Sensitive Fracture, Symp. ASTM Committee G-1, ASTM Special Technical Publication 821, S.W. Dean, E.N. Pugh, and G.M. Ugiansky, eds., ASTM, Philadelphia, PA, 1982.
3. A. Turnbull: Br. Corr. J., 1992, vol. 27, pp. 271–89.10.1179/bcj.1992.27.4.271 ↗
4. R.N. Ibrahim and H.L. Stark: Int. J. Fract., 1990, vol. 44, pp. 179–88.10.1007/BF00035515 ↗
5. R.N. Ibrahim: ASME PVP, 1999, vol. 388, pp. 155–61.
6. R.N. Ibrahim and H.L. Stark: Eng. Fract. Mech., 1986, vol. 25, pp. 395–401.10.1016/0013-7944(86)90253-5 ↗
7. R.K. Singh Raman and B.C. Muddle: Int. J. Pressure Vessels Piping, 2004, vol. 81, pp. 557–61.10.1016/j.ijpvp.2003.12.011 ↗
8. D. Singbeil and D. Tromans: J. Electrochem. Soc.: Electrochem. Sci. Technol. (Corr.), 1981, Oct., pp. 2065–70.10.1149/1.2127190 ↗
9. R.N. Parkins, P.W. Slattery, and B.S. Poulson: Corr.-NACE, 1981, vol. 37, p. 651.
10. H.H. Le and E. Ghali: J. Appl. Electrochem., 1992, vol. 22, p. 396.10.1007/BF01092695 ↗
11. D. Singbeil and D. Tromans: Metall. Trans. A, 1982, vol. 13A, p. 1091.10.1007/BF02643407 ↗
12. R. Sriram and D. Tromans: Metall. Trans. A, 1985, vol. 16A, p. 979.10.1007/BF02814850 ↗
13. N. Bandyopadhyay, C.L. Briant, and E.L. Hall: Metall. Trans. A, 1985, vol. 16A, p. 1333.10.1007/BF02670337 ↗
14. H.H. Le and E. Ghali: Corr. Sci., 1990, vol. 30, p. 117.10.1016/0010-938X(90)90067-F ↗
15. S. Liu, Z. Zhu, H. Hui, and W. Ke: Metall. Mater. Trans. A, 1996, vol. 27A, p. 1327.10.1007/BF02649869 ↗
16. J. Might and D.J. Duquette: Corrosion, 1996, vol. 52, p. 428.10.5006/1.3292130 ↗
17. R.K. Singh Raman: Metall. Mater. Trans. A, 2005, vol. 36A, p. 1817.10.1007/s11661-005-0045-z ↗
18. H.L. Ewalds and R.J.H. Wanhill: Fracture Mechanics, 2nd Print, Edward Arnold, London, U.K., 1985.
19. ASTM, ASTM Special Committee on Fracture Testing of High-Strength Metallic Materials: Fracture Testing of High-Strength Sheet Materials, ASTM Bulletin 243, ASTM, Philadelphia, PA, 1960, pp. 29–40.
20. G.R. Irwin: Report No. 5486, Naval Research Laboratory, Washington, D.C., July 1960.
21. G.R. Irwin: Sugamore Ordinance Materials Conf., Syracuse University Research Institute, Syracuse, NY, 1961.
22. F.A. McClintock and G.R. Irwin: ASTM STP, 1965, vol. 381, p. 84.
23. H.L. Stark and R.N. Ibrahim: Eng. Fract. Mech., 1988, vol. 30 (3), pp. 409–14.10.1016/0013-7944(88)90198-1 ↗
24. H.L. Stark and R.N. Ibrahim: Eng. Fract. Mech., 1992, vol. 41 (4), pp. 569–75.10.1016/0013-7944(92)90301-T ↗
25. B.F. Brown and C.D. Beacham: Corr. Sci., 1965, vol. 5, pp. 745–50.10.1016/S0010-938X(65)80002-6 ↗
26. H.R. Smith, D.E. Piper, and F.K. Downey: Eng. Fract. Mech., 1968, vol. 1, pp. 123–28.10.1016/0013-7944(68)90019-2 ↗
27. R.K. Singh Raman, R. Rihan, and R.N. Ibrahim: Monash University, Melbourne, Australia, unpublished research, 2006.