journal article·2012-08

Environmental Effects on Fatigue Crack Growth in 7075 Aluminum Alloy

A. Bonakdar, F. Wang, J. J. Williams, N. Chawla

Publisher page

Abstract

The fatigue behavior of aluminum alloys is greatly influenced by the environmental conditions. In this article, fatigue crack growth rates were measured for 7075-T651 Al alloy under ultrahigh vacuum (UHV, ~10−10 Torr), dry air, and water vapor. Standard compact tension (CT) specimens were tested along the L-T orientation under various load ratios of 0.1, 0.5, and 0.8. Fracture surfaces and crack morphologies were studied using scanning electron microscopy and crack deflection analysis. The crack growth behavior under vacuum was affected by friction and possible rewelding of crack surfaces, causing an asymmetry in the crack growth behavior, from load shedding to constant load. The enhancement of crack growth at higher moisture levels was observed and is discussed in terms of moisture decreasing friction between the crack faces. The effect of crack deflection as a function of R ratio and environment is also presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. R.P. Wei, P.S. Pao, R.G. Hart, T.W. Weir, and G.W. Simmons: Metall. Trans. A, 1980, vol. 11A, pp. 151–58.10.1007/BF02700451 ↗
2. R.P. Wei and R.P. Gangloff: in Fracture Mechanics: Perspectives and Directions, ASTM STP 1020, R.P. Wei and R.P. Gangloff, eds., ASTM, Philadelphia, PA, 1989, pp. 233–64.10.1520/STP1020-EB ↗
3. G. Henaff, K. Marchal, and J. Petit: Acta Metall. Mater., 1995, vol. 43, pp. 2931–42.10.1016/0956-7151(95)00002-D ↗
4. J. Ruiz and M. Elices: Mater. Sci. Vacuum, 1994, vol. 45, pp. 1069–71.10.1016/0042-207X(94)90025-6 ↗
5. A.K. Vasudevan, K. Sadananda, and R.L. Holtz: Int. J. Fatigue, 2005, vol. 27, pp. 1519–29.10.1016/j.ijfatigue.2005.07.026 ↗
6. P.S. Pao, Ming Gao, and R.P. Wei: Scripta Metall., 1985, vol. 19, pp. 265–70.10.1016/0036-9748(85)90310-2 ↗
7. J.L. Ham and G.S. Reichenbach: 4th Pacific Area National Meeting of ASTM, Los Angeles, CA, Oct. 1962.
8. A. Hartman: Int. J. Fract., 1965, vol. 1, pp. 167–88.10.1007/BF00186853 ↗
9. B. Bouchet: Doctoral Thesis, University of Poitiers, Poitiers, France, 1967.
10. R.P. Wei and G.W. Simmons: Int. J. Fract., 1981, vol. 17, pp. 235–47.10.1007/BF00053522 ↗
11. G. Henaff, J. Petit, and B. Bouchet: Int. J. Fatigue, 1992, vol. 14, pp. 211–18.10.1016/0142-1123(92)90002-T ↗
12. J. Petit and C. Sarrazin-Baudoux: Int. J. Fatigue, 2006, vol. 28, pp. 1471–78.10.1016/j.ijfatigue.2005.06.057 ↗
13. R.P. Gangloff and R.P. Wei: Small Fatigue Cracks, Proc. 2nd Engineering Foundation Int. Conf./Workshop, R.O. Ritchie and J. Lankford, eds., Santa Barbara, CA, 1986.
14. Y. Ro, S.R. Agnew, G.H. Bray, and R.P. Gangloff: Mater. Sci. Eng. A, 2007, vols. 468–470, pp. 88–97.10.1016/j.msea.2007.01.155 ↗
15. R.J.H. Wanhill: Metall. Trans. A, 1975, vol. 6A, pp. 1587–96.10.1007/BF02641972 ↗
16. M. Kikukawa, M. Jono, and M. Adachi: in ASTM STP 675: Fatigue Mechanics, J.T. Fong, ed., 1979, ASTM, Philadelphia, PA, pp. 234–53.10.1520/STP35892S ↗
17. P. Neumann, H. Fuhlrott, and H. Vehoff: in ASTM STP 675: Fatigue Mechanics, J.T. Fong, ed., ASTM, Philadelphia, PA, 1979, pp. 371–95.10.1520/STP35899S ↗
18. H. Fuhlrott and P. Neumann: in Mechanisms of Environment Sensitive Cracking of Materials, P.R. Swan, F.P. Ford, and A.R.C. Westwood, eds., Metals Society, London, 1977, pp. 375–85.
19. R.B. Scarlin: in ASTM STP 675: Fatigue Mechanics, J.T. Fong, ed., 1979, pp. 396–419.10.1520/STP35900S ↗
20. J.Z. Zhang, M.D. Halliday, and P. Bowen: J. Mater. Sci. Technol., 1998, vol. 14, pp. 193–200.10.1179/026708398790301629 ↗
21. S. Suresh: Metall. Trans. A, 1983, vol. 14A, pp. 2375–85.10.1007/BF02663313 ↗
22. H. Kitagawa, R. Yuuki, and T. Oshira: Eng. Fract. Mech., 1975, vol. 7, pp. 515–29.10.1016/0013-7944(75)90052-1 ↗
23. S. Suresh: Eng. Fract. Mech., 1983, vol. 18, pp. 577–93.10.1016/0013-7944(83)90051-6 ↗
24. A.K. Vasudevan and K. Sadananda: Int. J. Fatigue, 2009, vol. 31, pp. 1696–1708.10.1016/j.ijfatigue.2009.03.019 ↗
25. S. Smith and R. Piascik: NASA Lab Report No. NASA/TM-2001-211248, NASA, Washington, DC, 2001.
26. J. Ruiz and M. Elices: J. Test. Eval., 1995, vol. 23, pp. 275–80.10.1520/JTE10425J ↗
27. J. Ruiz and M. Elices: Corros. Sci., 1996, vol. 38, pp. 1815–37.10.1016/S0010-938X(96)00096-0 ↗
28. Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM-E647, ASTM, Philadelphia, PA, 2008.
29. F. Wang, J.J. Williams, and N. Chawla: in Fatigue of Materials, Materials Science and Technology, T.S. Sudharshan and M.A. Imam, eds., TMS, Wiley, 2010, pp. 29–41.10.1002/9781118013373.ch3 ↗
30. A.K. Vasudevan and K. Sadananda: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1221–34.10.1007/BF02670617 ↗
31. H. Doker and G. Marci: Int. J. Fatigue, 1983, vol. 5, pp. 187–91.10.1016/0142-1123(83)90039-7 ↗
32. B.R. Kirby and C.J. Beevers: Fatigue Fract. Eng. Mater. Struct., 1979, vol. 1, pp. 203–15.10.1111/j.1460-2695.1979.tb00378.x ↗
33. S. Suresh: Fatigue of Materials, Cambridge University Press, Cambridge, United Kingdom, 1998.
34. J. Petit, G. Henaff, and C. Sarrazin-Baudoux: in Fatigue Crack Growth Thresholds, Endurance Limits, and Designs, J.C. Newman and R.S. Piascik, eds., ASTM Special Technical Publication, ASTM, Philadelphia, PA, 2000, pp. 3–30.10.1520/STP13423S ↗
35. D.L. Dicus: ASTM STP 821, ASTM, Philadelphia, PA, 1984, p. 513.
36. M.O. Speidel: Hydrogen in Metals, ASM, Metals Park, OH, 1974, p. 249.