Nanocrystallization and magnetic properties of Fe-30 weight percent Ni alloy by surface mechanical attrition treatment
Source abstract
Abstract
A nanostructured surface layer was formed in Fe-30 wt pct Ni alloy by surface mechanical attrition treatment (SMAT). The microstructure of the surface layer after SMAT was investigated using optical microscopy, X-ray diffraction, and transmission electron microscopy. The analysis shows that the nanocrystallization process at the surface layer starts from dislocation tangles, dislocation cells, and subgrains to highly misoriented grains in both original austenite and martensite phases induced by strain from SMAT. The magnetic properties were measured for SMAT Fe-30 wt pct Ni alloy. The saturation magnetization (M s ) and coercivity (H c ) of the nanostructured surface layers increase significantly compared to the coarse grains sample prior to SMAT. The increase of M s for SMAT Fe-30 wt pct Ni alloy was attributed to the change of lattice structure resulting from strain-induced martensitic transformation. Meanwhile, H c was further increased from residual microstress and superfined grains. These were verified by experiments on SMAT pure Ni and Co metal as well as liquid nitrogen-quenched Fe-30 wt pct Ni alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal Alloys Wear and Properties · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. K. Lu and J. Lü: Chinese patent no. 99122670.4, 1999.
2. K. Lu and J. Lü: J. Mater. Sci. Technol., 1999, vol. 15, pp. 193–97.10.1179/026708399101505581 ↗
3. K. Lu and J. Lü: Mater. Sci. Eng. A, 2004, vol. 375–377, pp. 38–45.10.1016/j.msea.2003.10.261 ↗
4. N.R. Tao, M.L. Sui, J. Lü, and K. Lu: Nanostr. Mater., 1999, vol. 11, pp. 433–40.10.1016/S0965-9773(99)00324-4 ↗
5. H.W. Zhang, Z.K. Hei, G. Liu, J. Lü, and K. Lu: Acta Mater., 2003, vol. 51, pp. 1871–81.10.1016/S1359-6454(02)00594-3 ↗
6. G. Liu, S.C. Wang, X.F. Lou, J. Lü, and K. Lu: Scripta Mater., 2001, vol. 44, pp. 1791–95.10.1016/S1359-6462(01)00738-2 ↗
7. N.R. Tao, Z.B. Wang, W.P. Tong, M.L. Sui, J. Lü, and K. Lu: Acta Mater., 2002, vol. 50, pp. 4603–16.10.1016/S1359-6454(02)00310-5 ↗
8. X. Wu, N. Tao, Y. Hong, B. Xu, J. Lü, and K. Lu: Acta Mater., 2002, vol. 50, pp. 2075–84.10.1016/S1359-6454(02)00051-4 ↗
9. Z.Y. Liu, W. Gao, K.L. Dahm, and F.H. Wang: Acta Mater., 1998, vol. 46 (5), pp. 1691–700.10.1016/S1359-6454(97)00346-7 ↗
10. F.H. Wang, S.J. Geng, and S.L. Zhu: Oxid. Met., 2002, vol. 58, pp. 185–95.10.1023/A:1016072726338 ↗
11. K. Lu: Mater. Sci. Eng., 1996, vol. R16, pp. 161–221.10.1016/0927-796X(95)00187-5 ↗
12. Y.M. Wang, K. Wang, D. Pan, J. Lü, and K. Lu: Scripta Mater., 2003, vol. 48, pp. 1581–86.10.1016/S1359-6462(03)00159-3 ↗
13. Z.B. Wang, N.R. Tao, S. Li, W. Wang, G. Liu, J. Lü, and K. Lu: Mater. Sci. Eng. A, 2003, vol. 352, pp. 144–49.10.1016/S0921-5093(02)00870-5 ↗
14. X.P. Yong, G. Liu, K. Lu, and J. Lü: J. Mater. Sci. Technol., 2003, vol. 19, pp. 1–4.10.1179/026708303225008626 ↗
15. N.R. Tao, W.P. Tong, Z.B. Wang, W. Wang, M.L. Sui, J. Lü, and K. Lu: J. Mater. Sci. Technol., 2003, vol. 19, pp. 563–66.
16. R.C. O’Handley: Modern Magnetic Materials, John Wiley & Sons, Inc., New York, NY, 2000, pp. 367–74, 432–66.
17. G. Herzer: IEEE Trans. Magn., 1989, vol. 25, pp. 3327–29.10.1109/20.42292 ↗
18. G. Herzer: IEEE Trans. Magn., 1990, vol. 26, pp. 1397–402.10.1109/20.104389 ↗
19. B.D. Cullity: Introduction to Magnetic Materials, Addison-Wesley Publishing Co., Reading, MA, 1972, pp. 320, 385–86.
20. Z.Q. Qiu, Y.W. Du, H. Tang, and J.C. Walker: J. Appl. Phys., 1988, vol. 15, pp. 4100–104.10.1063/1.340508 ↗
21. H. Sato, O. Kitakami, T. Sakurai, Y. Shimada, Y. Otani, and K. Fukamichi: J. Appl. Phys., 1997, vol. 81, pp. 1858–62.10.1063/1.364041 ↗
22. Y.Q. Wu, T. Bitoh, K. Hono, A. Makino, and A. Inoue: Acta Mater., 2001, vol. 49, pp. 4069–77.10.1016/S1359-6454(01)00274-9 ↗
23. E.G. Skomski: J. Phys. Condens. Mater., 2003, vol. 15, pp. R841–96.10.1088/0953-8984/15/20/202 ↗
24. W. Gong, H. Li, Z.R. Zhao, and J.C. Chen: J. Appl. Phys., 1991, vol. 69, pp. 5119–21.10.1063/1.348144 ↗
25. J.G. Li, Y. Qin, X.L. Kou, H.Y. He, and D.K. Song: Mater. Lett., 2004, vol. 58, pp. 2506–509.10.1016/j.matlet.2004.03.026 ↗
26. Y. Yoshizawa, K. Yamauchi, T. Yamane, and H. Sugihara: J. Appl. Phys., 1988, vol. 64, pp. 6047–49.10.1063/1.342150 ↗
27. J.W. Christian: Transformations in Metals and Alloys, 2nd ed., Pergamon Press, Oxford, UK, 1975, pp. 1–15.
28. L.J. Swartzendruber, V.P. Itkin, and C.B. Alcock: J. Phase Equilib., 1991, vol. 12, pp. 288–312.10.1007/BF02649918 ↗
29. M. Grujicic and P. Dang: Mater. Sci. Eng. A, 1995, vol. 201, pp. 194–204.10.1016/0921-5093(94)09735-6 ↗
30. Z.Z. Yu and P.C. Clapp: Metall. Trans. A, 1989, vol. 20, pp. 1617–29.10.1007/BF02663195 ↗
31. H.G. Jiang, M. Rühle, and E.J. Lavernia: J. Mater. Res., 1999, vol. 14, pp. 549–59.10.1557/JMR.1999.0079 ↗
32. B.D. Cullity: Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley Publishing Co., Reading, MA, 1978, pp. 107–43.