journal article·2004-09

A novel observation of strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel

Haiwen Luo, Jilt Sietsma, Sybrand Van Der Zwaag

Publisher page

Abstract

It was found that a ferrite-to-austenite retransformation can take place during isothermal holding after deformation in 0.19 pct C-1.46 pct Mn steel at higher intercritical temperatures, but it was not observed at lower intercritical temperatures. This new finding was revealed by the combined techniques of optical observation and quantitative metallographic measurements. Also, two unexpected experimental observations on the quenched microstructure can be interpreted very well by the retransformation: one is that microhardness does not decrease at the end of relaxation as expected; the other is that an experimentally observed X-ray peak gets broader after long relaxation. In contrast, dilatometry measurements on the undeformed specimens show that the thermodynamically induced transformation during the isothermal holding should be from austenite to ferrite. Therefore, the ferrite-to-austenite retransformation after deformation should be strain induced. Such a retransformation can be explained quite well using a validated and quantitative model for the intercritical rolling and softening of both austenite and ferrite. The model presented is based on the fact that in intercritically deformed steel there is a strain distribution over the two phases with the more strain in the softer ferrite. The ferrite dynamically recovers, which leads to a shift in the relative amount of stored energy in the two phases. This phenomenon leads to a shift in the equilibrium fractions of ferrite and austenite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. D.N. Hanlon, J. Sietsma, and S. van der Zwaag: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 1028–36.10.2355/isijinternational.41.1028 ↗
2. X. Liu, L.P. Karjalainen, and J.S. Pertulla: Conf. Proc. 2nd Int. Conf. on Modelling of Metal Rolling Processes, J.H. Beynon, P. Ingham, H. Tecichert, and K. Waterson, eds., The Institute of Metals, London, 1996, pp. 489–500.
3. R. Pandi, M. Militzer, E.B. Hawbolt, and T.R. Meadowcroft: Conf. Proc. 37th MWSP, ISS, Warrendale, PA, 1996, vol. XXXIII, pp. 635–47.
4. A.J. De Ardo: Conf. Proc. Accelerated Cooling of Steels, P. Southwick, ed., AIME, Pittsburgh, PA, 1986, pp. 97–106.
5. H. Yada, C.M. Li, and H. Yamagata: Iron Steel Inst. Jpn. Int., 2000, vol. 40, pp. 200–06.10.2355/isijinternational.40.200 ↗
6. C.M. Li, H. Yada, and H. Yamagata: Scripta Mater., 1998, vol. 39, pp. 963–67.10.1016/S1359-6462(98)00239-5 ↗
7. H. Yada and T. Senuma: Proc. 7th JIM Int. Symp. on Aspects of High Temperature Deformation and Fracture Deformation and Fracture in Crystalline Materials, Nagoya; Japan; 28–31 July 1993, pp 51–58. Y. Hosoi, H. Yoshinaga, H. Oikawa, and K. Maruyama, eds., published by The Japan Institute of Metals, Aramaki Aoba, Aoba-Ku, Sendai 980, Japan.
8. L.P. Karjalainen: Mater. Sci. Technol., 1995, vol. 11, pp. 557–64.10.1179/mst.1995.11.6.557 ↗
9. L.P. Karjalainen, J. Pettula, Y. Xu, and J. Niu: Proc. 7th Int. Symp. on Physical Simulation of Casting, Hot Rolling and Welding, Tsukuba; Japan, 1997, pp. 231–236, published by National Research Institute for Metals, 2-3-12, Nakameguro, Meguro-ku, Tokyo, Japan.
10. “Axisymmetric Uniaxial Compression Testing Using ISO-T Anvils on Gleeble Systems,” Application Note, DSI Company, Poestenkill, New York, NY, http://www.gleeble.com/AppNotes/AppNotes.
11. H. Luo, D.N. Hanlon, J. Sietsma, and S. van der Zwaag: Proceedings of 4th Int. Conf. on Physical and Numerical Simulation of Materials Processing (CD-ROM), Shanghai, China, May 26–29, 2004.
12. R. Pandi and S. Yue: Iron Steel Inst. Jpn. Int., 1994, vol. 34, pp. 270–79.10.2355/isijinternational.34.270 ↗
13. Y. Bergström: Rev. Powder Metall. Phys. Ceram., 1983, vol. 2, pp. 79–265.
14. Y. Bergström: Mater. Sci. Eng., 1969–70, vol. 5, pp. 193–200.10.1016/0025-5416(70)90081-9 ↗
15. A. Bodin: Ph.D. Dissertation, Delft University of Technology, Delft, The Netherlands, 2002, pp. 19–23.
16. A. Bodin, J. Sietsma, and S. van der Zwaag: Scripta Mater., 2001, vol. 45, pp. 875–82.10.1016/S1359-6462(01)01050-8 ↗
17. A. Yoshie, H. Morikawa, Y. Onoe, and K. Itoh: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 425–31.10.2355/isijinternational1966.27.425 ↗
18. W. Roberts and Y. Bergström: Acta Metall., 1973, vol. 21, pp. 457–69.10.1016/0001-6160(73)90203-4 ↗
19. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier Science Ltd., Oxford, United Kingdom, 1995, pp. 16–17.