Chemically Induced Phase Transformation in Austenite by Focused Ion Beam
Source abstract
Abstract
A highly stable austenite phase in a super duplex stainless steel was subjected to a combination of different gallium ion doses at different acceleration voltages. It was shown that contrary to what is expected, an austenite to ferrite phase transformation occurred within the focused ion beam (FIB) milled regions. Chemical analysis of the FIB milled region proved that the gallium implantation preceded the FIB milling. High resolution electron backscatter diffraction analysis also showed that the phase transformation was not followed by the typical shear and plastic deformation expected from the martensitic transformation. On the basis of these observations, it was concluded that the change in the chemical composition of the austenite and the local increase in gallium, which is a ferrite stabilizer, results in the local selective transformation of austenite to ferrite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. G.B. Olson and M. Azrin: Metall. Trans. A, 1978, vol. 9, pp. 713-21.10.1007/BF02659928 ↗
2. O. Grässel, L. Krüger, G. Frommeyer and L.W. Meyer: Int. J. Plasticity, 2000, vol. 16, pp. 1391-409.10.1016/S0749-6419(00)00015-2 ↗
3. S.D. Antolovich and B. Singh: Metall. Trans. B, 1971, vol. 2, pp. 2135-41.10.1007/BF02917542 ↗
4. H.F.G. Abreu, S.S. Carvalho, P. Lima Neto, R.P. Santos, V.N. Freire, P.M. Oliveira Silva and S.S.M. Tavares: Mater. Res., 2007, vol. 10, pp. 359-66.10.1590/S1516-14392007000400007 ↗
5. G. Baudry and A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 229-42.10.1016/0025-5416(77)90176-8 ↗
6. K. Sato, M. Ichinose, Y. Hirotsu and Y. Inoue: ISIJ Int., 1989, vol. 29, pp. 868-77.10.2355/isijinternational.29.868 ↗
7. D.C. Larbalestier and H.W. King: Cryogenics, 1973, vol. 13, pp. 160-68.10.1016/0011-2275(73)90285-3 ↗
8. L.A.A. Warnes and H.W. King: Cryogenics, 1976, vol. 16, pp. 659-67.10.1016/0011-2275(76)90038-2 ↗
9. K.H. Lo and J.K.L. Lai: J. Magn. Magn. Mater., 2010, vol. 322, pp. 2335-39.10.1016/j.jmmm.2010.02.034 ↗
10. H.W. Pickering: Physical metallurgy and the design of steels, Applied Science Publishers, London, 1978, pp. 228.
11. F.C. Monkman, F.B. Cuff and N.J. Grant: Met. Prog., 1957, vol. 71, p. 94.
12. G.H. Eichelman and F.C. Hull: Trans. Am. Soc. Met., 1953, vol. 45, p. 77.
13. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, p. 721.
14. K. Spencer, J.D. Embury, K.T. Conlon, M. Véron and Y. Bréchet: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 873-81.10.1016/j.msea.2003.11.084 ↗
15. N. Hayashi, I. Sakamoto, E. Johnson, L. Graabak, P. Børgesen and B.M.U. Scherzer: Hyperfine Interact., 1988, vol. 42, pp. 989-92.10.1007/BF02395556 ↗
16. N. Hayashi, I. Sakamoto and T. Takahashi: J. Nucl. Mater., 1984, vol. 128–129, pp. 756-59.10.1016/0022-3115(84)90452-5 ↗
17. N. Hayashi and T. Takahashi: Appl. Phys. Lett., 1982, vol. 41, pp. 1100-01.10.1063/1.93379 ↗
18. E. Johnson, A. Johansen, L. Sarholt-Kristensen, L. Graab1k, N. Hayashi and I. Sakamoto: Nucl. Instrum. Meth. B, 1987, vol. 1920, pp. 171–76.10.1016/S0168-583X(87)80036-8 ↗
19. E. Johnson, A. Johansen, L. Sarholt-Kristensen, H. Roy-Poulsen and A. Christiansen: Nucl. Instrum. Meth. B, 1985, vol. 7–8, pp. 212-18.10.1016/0168-583X(85)90557-9 ↗
20. R.G. Vardiman and I.L. Singer: Mater. Lett., 1983, vol. 2, pp. 150-54.10.1016/0167-577X(83)90058-7 ↗
21. A. Barnoush, J. Dake, N. Kheradmand and H. Vehoff: Intermetallics, 2010, vol. 18, pp. 1385-89.10.1016/j.intermet.2010.01.001 ↗
22. N. Kheradmand, A. Barnoush, and H. Vehoff: J. Phys. Conf. Ser., 2010, vol. 240, 3216–30.10.1088/1742-6596/240/1/012017 ↗
23. C.A. Volkert and A.M. Minor: MRS Bull., 2007, vol. 32, pp. 389-99.10.1557/mrs2007.62 ↗
24. M.D. Uchic and D.M. Dimiduk: Mater. Sci. Eng., A, 2005, vol. 400-401, pp. 268-78.10.1016/j.msea.2005.03.082 ↗
25. D. Raabe, S. Zaefferer, P. Konijnenberg, E. Demir, A. Khorashadizadeh, and N. Zaafarani: E-MRS Spring Meeting, Strasbourg, France, 2010.
26. S. Zaefferer, S.I. Wright and D. Raabe: Metall. Mater. Trans. A, 2008, vol. 39, pp. 374-89.10.1007/s11661-007-9418-9 ↗
27. C. Holzapfel, W. Schäf, M. Marx, H. Vehoff and F. Mücklich: Scipta. Mater., 2007, vol. 56, pp. 697-700.10.1016/j.scriptamat.2006.12.025 ↗
28. W. Schaef, M. Marx, H. Vehoff, A. Heckl and P. Randelzhofer: Acta Mater., 2011, vol. 59, pp. 1849-61.10.1016/j.actamat.2010.11.051 ↗
29. S. Lozano-Perez: Micron, 2008, vol. 39, pp. 320-28.10.1016/j.micron.2007.12.003 ↗
30. S. Kuwano, T. Fujita, D. Pan, K. Wang and M. Chen: Mater. Trans., 2008, vol. 49, pp. 2091-95.10.2320/matertrans.MRA2008153 ↗
31. K.E. Knipling, D.J. Rowenhorst, R.W. Fonda and G. Spanos: Mater. Charact., 2010, vol. 61, pp. 1-6.10.1016/j.matchar.2009.09.013 ↗
32. A. Barnoush, M. Zamanzade and H. Vehoff: Scripta Mater., 2010, vol. 62, pp. 242-45.10.1016/j.scriptamat.2009.11.007 ↗
33. A. Barnoush and H. Vehoff: Scripta Mater., 2006, vol. 55, pp. 195-98.10.1016/j.scriptamat.2006.03.041 ↗
34. M. Henning and H. Vehoff: Acta Mater., 2005, vol. 53, pp. 1285-92.10.1016/j.actamat.2004.10.052 ↗
35. Z. Nishiyama: Sci. Rep. Tohoku, 1934, vol. 23, pp. 637-64.
36. G.V. Kurdjumov and G. Sachs: Z. Phys., 1930, vol. 64, pp. 325-43.10.1007/BF01397346 ↗
37. N. Kheradmand and H. Vehoff: Adv. Eng. Mater., 2012, vol. 14, pp. 153-61.10.1002/adem.201100242 ↗
38. P.J. Potts: A handbook of silicate rock analysis, Blackie, Glasgow and London, 1987, pp. 336-37.10.1007/978-94-015-3988-3 ↗
39. K. Kanaya and S. Okayama: J. Phys. D. Appl. Phys., 1972, vol. 5, pp. 43–58.10.1088/0022-3727/5/1/308 ↗
40. J.F. Ziegler, M.D. Ziegler and J.P. Biersack: Nucl. Instrum. Meth. B, 2010, vol. 268, pp. 1818-23.10.1016/j.nimb.2010.02.091 ↗
41. C. Capdevila, F.G. Caballero and C. Garcia de Andres: ISIJ Int., 2002, vol. 42, pp. 894-902.10.2355/isijinternational.42.894 ↗
42. Q.X. Dai, X.N. Cheng, Y.T. Zhao, X.M. Luo and Z.Z. Yuan: Mater. Charact., 2004, vol. 52, pp. 349-54.10.1016/j.matchar.2004.06.008 ↗
43. K. Ishida: J. Alloy Compd., 1995, vol. 220, pp. 126-31.10.1016/0925-8388(94)06002-9 ↗
44. E.R. Jones Jr, T. Datta, C. Almasan, D. Edwards and H.M. Ledbetter: Mater. Sci. Eng., 1987, vol. 91, pp. 181-88.10.1016/0025-5416(87)90296-5 ↗
45. S.S.M. Tavares, M.R. da Silva, J.M. Pardal, H.F.G. Abreu and A.M. Gomes: J. Mater. Process. Tech., 2006, vol. 180, pp. 318-22.10.1016/j.jmatprotec.2006.07.008 ↗
46. R. Naraghi, P. Hedström and A. Borgenstam: Steel Res. Int., 2011, vol. 82, pp. 337-45.10.1002/srin.201000118 ↗
47. H. Sato and S. Zaefferer: Acta Mater., 2009, vol. 57, pp. 1931-37.10.1016/j.actamat.2008.12.035 ↗
48. M. Calcagnotto, D. Ponge, E. Demir and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2738-46.10.1016/j.msea.2010.01.004 ↗
49. M. Karlsen, Ø. Grong, M. Søfferud, J. Hjelen, G. Rørvik and R. Chiron: Metall. Mater. Trans. A, 2009, vol. 40, pp. 310-20.10.1007/s11661-008-9729-5 ↗
50. M. Calcagnotto, D. Ponge and D. Raabe: Metall. Mater. Trans. A, 2012, vol. 43, pp. 37-46.10.1007/s11661-011-0828-3 ↗
51. D.G. Kolman, J.F. Bingert and R.D. Field: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3445-54.10.1007/s11661-004-0181-x ↗