journal article·2014-06

Influence of Prior Fatigue Cycling on Creep Behavior of Reduced Activation Ferritic-Martensitic Steel

Aritra Sarkar, V. D. Vijayanand, P. Parameswaran, Vani Shankar, R. Sandhya, K. Laha, M. D. Mathew, T. Jayakumar, E. Rajendra Kumar

Publisher page

Abstract

Creep tests were carried out at 823 K (550 °C) and 210 MPa on Reduced Activation Ferritic-Martensitic (RAFM) steel which was subjected to different extents of prior fatigue exposure at 823 K at a strain amplitude of ±0.6 pct to assess the effect of prior fatigue exposure on creep behavior. Extensive cyclic softening that characterized the fatigue damage was found to be immensely deleterious for creep strength of the tempered martensitic steel. Creep rupture life was reduced to 60 pct of that of the virgin steel when the steel was exposed to as low as 1 pct of fatigue life. However, creep life saturated after fatigue exposure of 40 pct. Increase in minimum creep rate and decrease in creep rupture ductility with a saturating trend were observed with prior fatigue exposures. To substantiate these findings, detailed transmission electron microscopy studies were carried out on the steel. With fatigue exposures, extensive recovery of martensitic-lath structure was distinctly observed which supported the cyclic softening behavior that was introduced due to prior fatigue. Consequently, prior fatigue exposures were considered responsible for decrease in creep ductility and associated reduction in the creep rupture strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A. Kohyama, Y. Kohno, K.A. Sakura, and H. Kayano: J. Nucl. Mater., 1994, vols. 212–215, pp. 684–89.10.1016/0022-3115(94)90145-7 ↗
2. N. Balue, R. Schanblin, P. Spatig and M.Victoria, Nucl. Fission, 2004, vol. 44, pp 56-61.10.1088/0029-5515/44/1/006 ↗
3. R.J. Kurtz, A. Alamo, E. Lucon, Q. Huang, S. Jitsukawa, A. Kimura, R.L. Klueh, G.R. Odette, C. Peterson, M.A. Sokolov, P. Spatig and J.W. Ransman, J. Nucl. Mater, 2009, vol. 411, pp. 386–88.
4. R.L. Klueh and D.R. Harris: ASTM Mono 3, West Conshahocken, PA, 2001.
5. K. Laha, S. Saroja, A. Moitra, R. Sandhya, M.D. Mathew, T. Jayakumar and E. Rajendra Kumar (2013). J. Nucl. Mater, 439, 41-50.10.1016/j.jnucmat.2013.03.073 ↗
6. B. Fournier, M. Sauzay, C. Caes, M. Noblecourt, M. Mottot, L. Allais, I. Tournie and A. Pineau (2009) Metall. Mater. Trans. A, 40A, 321–29.10.1007/s11661-008-9686-z ↗
7. V. Shankar, K. Mariappan, A. Nagesha, G.V. Prasad Reddy, R. Sandhya, M.D. Mathew, and T. Jayakumar: Fusion Eng. Des., 2012, vol. 87, pp. 318–24.10.1016/j.fusengdes.2012.01.020 ↗
8. J. Vanaja, K. Laha, R. Mythili, K.S. Chandravathi, S. Saroja and M.D. Mathew, Mater Sci. Eng. A, 2012, vol. 533, pp 17-25.10.1016/j.msea.2011.10.112 ↗
9. RCC MR: Design and Construction Rules for mechanical Components, CEA, France, 1993.
10. R5: Assessment Procedures for the High Temperature Response of Structures, British Energy, 2003.
11. A.F. Armas, C. Petersen, R. Schmitl, M. Avalos and I. Alvarez, J. Nucl. Mater., 2004, vol. 252, pp 329-33.
12. M.F. Giordana, I. Alvarez-Armas, M. Sauzay and A. Armas, Key Eng. Mater., 2011, vol. 465, pp 358-61.10.4028/www.scientific.net/KEM.465.358 ↗
13. B. Fournier, M. Sauzay, C. Caes, M. Noblecourt and M. Mottot, Mater. Sci. Eng. A, 2006, vol. 437, pp 183-96.10.1016/j.msea.2006.08.086 ↗
14. M. Kimura, M. Yamaguchi, M. Hayakuwa, K. Kobayashi, and K. Karazawa, Int. J. Fatigue, 2006, vol. 28, pp 300-08.10.1016/j.ijfatigue.2005.04.013 ↗
15. A. Nagesha, M. Valsan, R. Kannan, K. Bhanu Sankara Rao, and S.L. Mannan: Int. J. Fatigue, 2002, vol. 24, pp. 1285–93.
16. C. Vorpahl, A. Möslang and M. Rieth, J. Nucl. Mater., 2011, vol. 417, pp. 16-19.10.1016/j.jnucmat.2010.12.262 ↗
17. M.F.Giordana, I. Alvarez-Armas and A. Armas, J. Nucl. Mater., 2012, vol. 424, pp 247-51.10.1016/j.jnucmat.2012.03.019 ↗
18. J.S. Dubey, H. Chilukuru, J.K. Chakravartty, M. Schweinheer, A. Scholz, and W. Blum: Mater. Sci. Eng. A, 2009, vol. 406, pp. 152–59.10.1016/j.msea.2005.06.029 ↗
19. J. Pesicka, A. Aghajani, Ch. Somsen, A. Hartmaier and G. Eggeler, Scripta Mater., 2010, vol. 62, pp. 353-56.10.1016/j.scriptamat.2009.10.037 ↗
20. K. Maruyama, K. Sawada, J. Koike, ISIJ Int., 2001, Vol. 41, pp 641-53.10.2355/isijinternational.41.641 ↗
21. F. Masuyama, Materials for Advanced Power Engineering, Forschungzentrum Julich GmbH, Julich, 1998, p 1807.
22. J. Hald, S. Straub, Materials for Advanced Power Engineering, Forschungzentrum Julich GmbH, Julich, 1998, pp 155.
23. M. Hattestrand, M. Schwind, H.-O. Andren, Materials for Advanced Power Engineering, Forschungzentrum Julich GmbH, Julich, 1998, pp 529.
24. G.V. Prasad Reddy, R. Sandhya, K. Laha, and M.D. Mathew: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6449–53.10.1016/j.msea.2010.06.048 ↗
25. M. Sauzay, H. Brillet, J. Monnet, M. Mottot, F. Barcelo, B. Fournier and A. Pineau, Mater Sci. Eng. A, 2005, vols. 400–401, pp 241-44.10.1016/j.msea.2005.02.092 ↗
26. M. Sauzay, B. Fournier, M. Mottot, A. Pineau, and I. Monnet: Mater. Sci. Eng. A, 2008, vols. 483–484, pp. 410–16.10.1016/j.msea.2006.12.183 ↗
27. B. Fournier, F. Dalle, M. Sauzay, J. Langour, M. Salvi, C. Caes, I. Tournie, P.-F. Giroux, and S.H. Kim: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6934–45.10.1016/j.msea.2011.05.046 ↗
28. A. Kosta, K.-G. Tak, R.-J. Hellmig, Y. Estrin, G. Eggeler, Acta Mater., 2007, vol. 55, pp 539–50.10.1016/j.actamat.2006.08.046 ↗
29. A. Kostka, K.-G. Tak, G. Eggeler, Mater. Sci. Eng. A, 2008, vol. 481-482, pp 723–26.10.1016/j.msea.2007.02.154 ↗
30. A. Strang and V. Vodarek: Materials for Advanced Power Engineering, Forschungzentrum Julich GmbH, Julich, 1998, p. 603.
31. B. Wilshire and P.J. Scharning, Scripta Mater., 2007, vol. 56, pp 701-04.10.1016/j.scriptamat.2006.12.033 ↗
32. D. Sidey, Mater. Sci. Eng., 1978, vol. 33, p. 189.10.1016/0025-5416(78)90172-6 ↗
33. B. Fournier, M. Sauzay, F. Barcelo, E. Rauch, A. Renault, T. Cozzika, L. Dupuy and A. Pineau, Metall. Mater. Trans. A, 2009, vol. 40A, pp 330-41.10.1007/s11661-008-9687-y ↗
34. A. Orlova, J. Bursik, K. Kuchorova and V. Sklenicka, Mater. Sci. Eng. A, 2009, vol. 40A, pp 330-41.
35. H. Ghassemi-Armaki, R.P. Chen, K. Maruyama and M. Igarashi, J. Nucl. Mater. 2013, vol. 433, pp 23-29.10.1016/j.jnucmat.2012.09.026 ↗
36. H. Ghassemi-Armaki, R.P. Chen, K. Maruyama and M. Igarashi, J. Nucl. Mater. 2011, vol. 416, pp 273-79.10.1016/j.jnucmat.2011.06.007 ↗
37. K. Sawada, M. Takeda, K. Maruyama, R. Ishii, M. Yamada, Y. Nagae and R. Komine, Mater. Sci. Eng. A, 1999, vol. 267, pp 19–25.10.1016/S0921-5093(99)00066-0 ↗
38. S. Takeuchi, A.S. Argon, J. Mater. Sci., 1976, vol. 11, pp 1542–56.10.1007/BF00540888 ↗
39. F.A. Leckie and D.R. Hayhurst, Acta Metall., 1977, vol. 25, pp 1059-70.10.1016/0001-6160(77)90135-3 ↗
40. M.F. Ashby and B.F. Dyson: Advances in Fracture Research, Pergamon Press, Oxford, 1984, vol. 1, pp. 3–30.10.1016/B978-1-4832-8440-8.50017-X ↗
41. B.F. Dyson, T.B. Gibbons, Acta Metall., 1987, vol. 35, pp 2355-69.10.1016/0001-6160(87)90083-6 ↗