journal article·2009-12

Effect of Initial Microstructure on Surface Appearance of Anodized Aluminum Extrusions

Hanliang Zhu, Xinquan Zhang, Malcolm J. Couper, Arne K. Dahle

Publisher page

Abstract

Surface defects such as streaks are often present on anodized extrusions of 6xxx series alloys. Microstructural examination and extrusion trials were conducted to investigate the microstructural effect on the surface appearance and the formation of streak defects. It was found that the formation of an inhomogeneous distribution of grain boundary grooves is a critical factor for the formation of die streaks on anodized aluminum extrusions. This is influenced by various microstructural features. Fe-rich intermetallic particles reduced the difference in severity of grain boundary grooves on the same extrusion surface through their effect on other microstructure features, reducing the tendency for streaking. Also, grain size was found not to be a direct cause for the formation of grain boundary grooves, but it does influence the distribution and amount of grooves. Furthermore, variation of grain orientations caused the formation of grain etching steps, which influenced the morphology of grain boundary grooves, but these effects were not significant in the formation of the streak defects. However, MgSi precipitates influenced the difference in dissolution rates between grain interiors and grain boundaries during etching, dramatically influencing the formation and severity of grain boundary grooves. Therefore, it is important to reduce any inhomogeneous distribution of precipitates on the surface of extrusions to prevent die streaking and improve the surface appearance of the anodized product.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. K. Karhausen, A.L. Dons, and T. Aukrust: Mater. Sci. Forum, 1996, vol. 403, pp. 217–22.
2. T. Hauge and K.F. Karhausen: Alum. Extrus., 1998, vol. 3 (1), pp. 32–37.
3. X. Zhang, H. Zhu, A.K. Dahle, and M.J. Couper: Proc. 9th Int. Aluminum Extrusion Technology Seminar & Exposition, Orlando, FL, Aluminum Extrusion Council, Wauconda, IL, 2008, vol. 2, pp. 455–64.
4. P. Ratchev, R. Labie, B. Verlinden, and R.V.D. Broeck: Z. Metallkd., 2000, vol. 91, pp. 510–15.
5. Y. Wang, H. Kuo, and S. Kia: Proc. AESF SUR/FIN, American Electroplaters and Surface Finishers Society Inc., Orlando, FL, 2003, pp. 150–66.
6. R. Akeret, H. Bichsel, E. Schwall, E. Simon, and M. Textor: Trans. Inst. Met. Finish., 1989, vol. 67, pp. 20–28.
7. M.J. Couper, B. Rinderer, and J.Y. Yao: Mater. Sci. Forum, 2006, vols. 519–521, pp. 303–08.10.4028/www.scientific.net/MSF.519-521.303 ↗
8. H. Zhu, X. Zhang, M.J. Couper, and A.K. Dahle: Mater Chem. Phys., 2009, vol. 113, pp. 401–06.10.1016/j.matchemphys.2008.07.109 ↗
9. H. Zhu, X. Zhang, M.J. Couper, and A.K. Dahle: Proc. 17th Ann. Int. Anodizing Conf., San Francisco, CA, Aluminum Anodizers Council, Wauconda, IL, 2008, pp. 139–52.
10. P.K. Saha: Proc. 8th Int. Aluminum Extrusion Technology Seminar & Exposition, Orlando, FL, Aluminum Extrusion Council, Wauconda, IL, 2004, pp. 277–87.
11. G. Lea and C. Jowett: Proc. 8th Int. Aluminum Extrusion Technology Seminar & Exposition, Orlando, FL, Aluminum Extrusion Council, Wauconda, IL, 2004, pp. 251–60.
12. A. Yamashita, D. Yamaguchi, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2000, vol. 287, pp. 100–06.10.1016/S0921-5093(00)00836-4 ↗
13. T. Minoda and H. Yoshida: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2891–98.10.1007/s11661-002-0274-3 ↗
14. H. Zhu, J. Guo, and J. Jia: J. Mater. Eng. Perf., 2001, vol. 10, pp. 186–91.10.1361/105994901770345204 ↗
15. R. Vissers, M.A.V. Huis, J. Jansen, H.W. Zandbergen, C.D. Marioara, and S.J. Andersen: Acta Mater., 2007, vol. 55, pp. 3815–23.10.1016/j.actamat.2007.02.032 ↗
16. H.D. Chandler and J.V. Bee: Acta Metall., 1987, vol. 35, pp. 2503–10.10.1016/0001-6160(87)90147-7 ↗
17. Y. Song, M.D.J. Cross, W.M. Rainforth, and B.P. Wynne: Mater. Sci. Forum, 2007, vol. 550, pp. 211–16.10.4028/www.scientific.net/MSF.550.211 ↗