journal article·2011-04

Microstructure and Properties Analysis of Laser Welding and Laser Weld Bonding Mg to Al Joints

Liming Liu, Hongyang Wang

Publisher page

Abstract

Laser welding and laser weld bonding (LWB) Mg to Al joints were obtained in different welding parameters. The penetrations and microstructures of these kinds of joints changed with the increasing of pulse laser power density. Both laser welding and LWB Mg to Al joints with the best properties were obtained in conductive welding mode. In laser welding Mg to Al joint, several intermetallics formed at the bottom of the fusion zone, where some cracks were generated. In laser weld bonding Mg to Al joint, the decomposition of the adhesive caused a baffle effect on the diffusion between the Mg and the Al. The intermetallics formed in the middle of the fusion zone, and the thickness of Mg17Al12 layer was approximately 10 to 20 μm and the Mg2Al3 layer was less than 5 μm, which influenced the property of the joint less.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. M.P. Walsh: Plat. Met. Rev., 2000, vol. 44, pp. 22-30.10.1595/003214000X4412230 ↗
2. S.M. Bernard, J.M. Samet, A. Grambsch, K.L. Ebi, and I. Romieu: Environ. Health Perspect., 2001, vol. 109, pp. 199-20910.2307/3435010 ↗
3. L. Liu, X. Liu, and S. Liu: Scripta Mater., 2006, vol. 55, pp. 383-86.10.1016/j.scriptamat.2006.04.025 ↗
4. J. Yan and Z. Xu: Scripta Mater., 2005, vol. 53, pp. 585-89.10.1016/j.scriptamat.2005.04.022 ↗
5. A.C Somasekharan and L.E. Murr: Mater. Charact., 2004, vol. 52, pp.49-64.10.1016/j.matchar.2004.03.005 ↗
6. R. Borrisutthekul, Y. Miyashita, and Y. Mutoh, Sci. Tech. Adv. Mater., 2005, vol. 6, pp. 199-204.10.1016/j.stam.2004.11.014 ↗
7. Y.S. Sato, S.H.C. Park, M. Michiuchi, and H. Kokawa: Scripta Mater., 2004, vol. 50, pp. 1233-36.10.1016/j.scriptamat.2004.02.002 ↗
8. L.M. Liu, J.H. Tan, L.M. Zhao, and X.J. Liu: Mater. Charact., 2008, vol. 59, pp. 479-83.10.1016/j.matchar.2007.02.005 ↗
9. A. Ben-Artzy, A. Stern, N. Frage, and V. Shribman: Sci. Technol. Weld. Join., 2008, vol. 13, pp. 402-08.10.1179/174329308X300136 ↗
10. S.D. Kore, J. Imbert, M.J. Worswick, and Y. Zhou: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 549-53.10.1179/136217109X449201 ↗
11. L. Liu, H. Wang, and G. Song: J. Mater. Sci., 2007, vol. 42, pp. 565-72.10.1007/s10853-006-1068-6 ↗
12. L.-M. Liu, H.-Y. Wang, and Z.-D. Zhang: Scripta Mater., 2007, vol. 56, pp. 473-76.10.1016/j.scriptamat.2006.11.034 ↗
13. J. Mazumder and W.M. Steen: J. Appl. Phys., 1980, vol. 51, pp. 941-57.10.1063/1.327672 ↗
14. H. Zhao and T. DebRoy: J. Appl. Phys., 2003, vol. 93, pp. 10089-96.10.1063/1.1573732 ↗
15. X. He, J.W. Elmer, and T. DebRoy: J. Appl. Phys., 2005, vol. 97.10.1063/1.1873032 ↗
16. J.-Q. Su, T.W. Nelson, and R. Mishra: Acta Mater., 2003, vol. 51, pp. 713-29.10.1016/S1359-6454(02)00449-4 ↗