Microstructural Aspects of Second Phases in As-cast and Homogenized 7055 Aluminum Alloy with Different Impurity Contents
Source abstract
Abstract
The microstructural factors such as type, area fraction, morphology, distribution, and size of second phases in as-cast and homogenized 7055 aluminum alloy and the influence of impurity content variations have been investigated by using optical microscope (OM), scanning electron microscope (SEM), energy dispersive X-ray analysis (EDS), and X-ray diffraction (XRD). In as-cast microstructures, the dominant second phases of η [Mg(Al, Cu, Zn)2] with extended solubility of Cu and Al, a small amount of impurity phases of Al7Cu2Fe and Al3Fe with a little solubility of Cu and Si, and trace Mg2Si are identified. The variations of Fe and Si contents have no significant influence on the area fraction of η phases, but the area fraction of Fe-rich phase decreases from 0.231 to 0.102 pct with Fe content decreasing from 0.080 to 0.038 wt pct. Decreasing Fe contents reduces the size parameters of Fe-rich phases and refines their morphology correspondingly. After being homogenized at 753 K (480 °C) for 24 hours, η phases are largely dissolved, but the coarse impurity phases are insoluble. Compared with as-cast microstructures, the area fraction and composition of Fe-rich phases change a little but their morphologies are slightly coarsened.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, and W.S. Miller: Mater. Sci. Eng. A, 2000, vol. 280, pp. 102-7.10.1016/S0921-5093(99)00674-7 ↗
2. R. Ayer, J.Y. Koo, J.W. Steeds, and B.K. Park: Metall. Trans. A, 1985, vol. 16A, pp. 1925-36.10.1007/BF02662393 ↗
3. A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 717-28.10.1007/s11661-008-9741-9 ↗
4. J.D. Robson: Mater. Sci. Eng. A, 2004, vol. 382, pp. 112-21.10.1016/j.msea.2004.05.006 ↗
5. G. Sha, Y.B. Wang, X.Z. Liao, Z.C. Duan, S.P. Ringer, and T.G. Langdon: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4742-9.10.1016/j.msea.2010.04.041 ↗
6. Z. Cvijović, M. Rakin, M. Vratnica, and I. Cvijović: Eng. Fract. Mech., 2008, vol. 75, pp. 2115-29.10.1016/j.engfracmech.2007.10.010 ↗
7. T.F Morgeneyer, M.J. Starink, and I. Sinclair: Acta Mater., 2008, vol. 56, pp. 1671-9.10.1016/j.actamat.2007.12.019 ↗
8. D. Najjar, T. Magnin, and T.J. Warner: Mater. Sci. Eng. A, 1997, vol. 238, pp. 293-302.10.1016/S0921-5093(97)00369-9 ↗
9. J. Wloka, G. Burklin, and S. Virtanen: Electrochim. Acta, 2007, vol. 53, pp. 2055-9.10.1016/j.electacta.2007.09.004 ↗
10. F. Andreatta, H. Terryn, and J.H.W. de Wit: Corros. Sci., 2003, vol. 45, pp. 1733–46.10.1016/S0010-938X(03)00004-0 ↗
11. N. Birbili, M.K. Cavanaugh, and R.G. Buchheit: Corros. Sci., 2006, vol. 48, pp. 4202-15.10.1016/j.corsci.2006.02.007 ↗
12. S.P. Knight, N. Birbilis, B.C. Muddle, A.R. Trueman, and S.P. Lynch: Corros. Sci., 2010, vol. 52, pp. 4073-80.10.1016/j.corsci.2010.08.024 ↗
13. G.T. Hahn and R. Rosenfield: Metall. Trans. A, 1975, vol. 6A, pp. 653-68.10.1007/BF02672285 ↗
14. D.S Thompson: Metall. Trans. A, 1975, vol. 6A, pp. 671-83.10.1007/BF02672287 ↗
15. M. Vratnica, G. Pluvinage, P. Jodin, Z. Cvijović, M. Rakin, and Z. Burzić: Mater. Design, 2010, vol. 31, pp. 1790-8.10.1016/j.matdes.2009.11.018 ↗
16. T. Ohira and T. Kishi: Mater. Sci. Eng., 1986, vol. 78 pp. 9–19.10.1016/0025-5416(86)90075-3 ↗
17. Y.B. Zuo, J.Z. Cui, J. Dong, and F.X. Yu: J. Alloys Compd., 2005, vol. 402, pp. 149-55.10.1016/j.jallcom.2005.04.135 ↗
18. C. Mondal and A.K. Mukhopadhyay: Mater. Sci. Eng. A, 2005, vol. 391, pp. 367-6.10.1016/j.msea.2004.09.013 ↗
19. L.L. Rokhlin, T.V. Dobatkina, N.R. Bochvar, and E.V. Lysova: J. Alloys Compd., 2004, vol. 367, pp. 10-6.10.1016/j.jallcom.2003.08.003 ↗
20. X.G. Fan, D.M. Jiang, Q.C. Meng, and L. Zhong: Mater. Lett., 2006, vol. 60, pp. 1475-9.10.1016/j.matlet.2005.11.049 ↗
21. F.Y. Xie, X.Y. Yan, L. Ding, F. Zhang, S.L. Chen, M.G. Chu, and Y.A. Chang: Mater. Sci. Eng. A, 2003, vol. 355, pp. 144-53.10.1016/S0921-5093(03)00056-X ↗
22. Y.X. Ii, P. Li, G. Zhao, X.T. Liu, and J.Z. Cui: Mater. Sci. Eng. A, 2005, vol. 397, pp. 204-8.10.1016/j.msea.2005.02.013 ↗
23. N. Pourkia, M. Emamy, H. Farhangi, and S.H. Seyed Ebrahimi: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5318–25.10.1016/j.msea.2010.05.009 ↗
24. X.M. Li and M.J. Starink: J. Alloys Compd., 2011, vol. 509, pp. 471-76.10.1016/j.jallcom.2010.09.064 ↗
25. Y.L. Deng, L. Wan, L.H. Wu, Y.Y. Zhang, and X.M. Zhang: J. Mater. Sci., 2011, vol. 46, pp. 875-81.10.1007/s10853-010-4828-2 ↗
26. C.M. Allena, K.A.Q. O’Reilly, B. Cantor, and P.V. Evans: Prog. Mater. Sci., 1998, vol. 43, pp. 89-170.10.1016/S0079-6425(98)00003-6 ↗
27. K. Kaekwan, T. Pramote, S. Mawin, H. Nagaumi, and T. Umeda: Int. J. Cast Metal. Res., 2008, vol. 21, pp. 119-24.10.1179/136404608X361792 ↗
28. X.Y. Lv, E.J. Guo, Z.H. Li, and G.J. Wang: Rare Met., 2011, vol. 30, pp. 664-8.10.1007/s12598-011-0446-7 ↗
29. C. Freiburg and B. Grushko: J. Alloys Compd., 1994, vol. 210, pp. 149-52.10.1016/0925-8388(94)90130-9 ↗
30. L.F. Mondolfo: in Aluminium Alloys: Structure and Properties. Butterworths, London, U.K., 1976.10.1016/B978-0-408-70932-3.50008-5 ↗
31. M. Asta, C. Beckermann, A. Karma, W. Kurz, R. Napolitano, M. Plapp, G. Purdy, M. Rappaz, and R. Trivedi: Acta Mater., 2009, vol. 57, pp. 941-71.10.1016/j.actamat.2008.10.020 ↗
32. Y. Du, Y.A. Chang, B.Y. Huang, W.P. Gong, Z.P. Jin, H.H. Xu, Z.H. Yuan, Y. Liu, Y.H. He, and F.-Y. Xie: Mater. Sci. Eng. A, 2003, vol. 363, pp. 140-51.10.1016/S0921-5093(03)00624-5 ↗