Oxygen Embrittlement and Time-Dependent Grain-Boundary Cracking of ALLVAC 718PLUS
Source abstract
Abstract
This study focuses on the time-dependent intergranular cracking of a newly developed Ni-base superalloy ALLVAC 718PLUS. Grain-boundary (GB) cracking is due to the penetration of oxygen down grain boundaries and subsequent oxidation of GB particles, i.e., carbides and possibly delta phase present at the grain boundaries. The GB oxidation and subsequent brittle intergranular failure of this material is highly dependent upon moisture level in the testing atmosphere. With increasing moisture level in the test atmosphere, it is demonstrated that hydrogen may become dominant over oxygen as the embrittling species. The degree of susceptibility to time-dependent intergranular cracking is also highly dependent upon microstructure. The behavior exhibited by ALLVAC 718PLUS is common to a wide range of Ni- base superalloys when tested in air or other aggressive environments. A six-step model for the grain-boundary cracking mechanism is presented. The model is presented for hydrogen in high-moisture environments but is equally applicable to oxygen at lower-moisture levels, as well. Structures which provide increased resistance to time-dependent intergranular cracking are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Superalloys 718, 625, 706 and Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2005
2. D.A. Woodford: Energy Mater., 2006, vol. 1, pp. 59–7910.1179/174892306X99679 ↗
3. M. Sundararaman, P. Mukhopadhyay, S. Banerjee: Metall. Trans. A, 1988, vol. 19A, pp. 453–6510.1007/BF02649259 ↗
4. P. Valerio, M. Gao, R.P. Wei: Scripta Metall. Mater., 1994, vol. 30, pp. 1269–7410.1016/0956-716X(94)90257-7 ↗
5. S. Floreen: Metall. Trans. A, 1975, vol. 6A, pp. 1741–4910.1007/BF02642302 ↗
6. K. Sadananda, P. Shahinian: Metall. Trans. A, 1977, vol. 8A, pp. 439–4910.1007/BF02661754 ↗
7. Z. Huang, C. Iwashita, I. Chou, R.P. Wei: Metall. Trans. A, 2002, vol. 33A, pp. 1681–8710.1007/s11661-002-0177-3 ↗
8. R.W. Hayes, D.F. Smith, E.A. Wanner, J.C. Earthman: Mater. Sci. Eng., 1993, vol. 172, pp. 43–5310.1016/0921-5093(93)90424-D ↗
9. W.H. Chang: Superalloys Processing, MCIC-72-10, AIME, Littleton, CO, 1972
10. S. Floreen, R. Raj: Flow and Fracture at Elevated Temperature, ASM, Warrendale, PA, 1983, pp. 383–404
11. A. Kimura, H.K. Birnbaum: Acta Metall., 1988, vol. 36, pp. 757–6610.1016/0001-6160(88)90109-5 ↗
12. B.G. Pound: Acta Metall. Mater., 1990, vol. 38, pp. 2373–8110.1016/0956-7151(90)90250-K ↗
13. W.M. Robertson: Metall. Trans. A, 1977, vol. 8A, p. 170910.1007/BF02646873 ↗
14. D.A. Woodford: private communication, Materials Performance Analysis, Inc., Santa Barbara, CA, 2007
15. D.G. Ulmer, C.J. Altstetter: Acta Metall. Mater., 1991, vol. 39, pp. 1237–4810.1016/0956-7151(91)90211-I ↗
16. T. Watanabe: Res. Mechanica, 1984, vol. 11, pp. 47–84
17. C.J. Boehlert, D.S. Dickmann, N.C. Eisinger: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 27–4010.1007/s11661-006-0149-0 ↗
18. P.F. Browning: Ph.D. Dissertation, Rensselser Polytechnic Institute, Troy, NY, 1998
19. U. Krupp, W.M. Kane, X. Liu, O. Dueber, C. Laird, C.J. McMahon Jr.: Mater. Sci. Eng., 2003, vol. A349, pp. 213–1710.1016/S0921-5093(02)00753-0 ↗
20. U. Krupp, W.M. Kane, C. Laird, C.J. McMahon Jr.: Mater. Sci. Eng., 2004, vols. A387–A89, pp. 409–1310.1016/j.msea.2004.05.053 ↗
21. L.C. Lim, T. Watanabe: Acta Metall. Mater., 1990, vol. 38, pp. 2507–1610.1016/0956-7151(90)90262-F ↗
22. R. Molins, G. Hochstetter, J.C. Chassaigne, E. Andrieu: Acta Mater., 1997, vol. 45, pp. 663–76410.1016/S1359-6454(96)00192-9 ↗