Experimental and Modeling of the Coupled Influences of Variously Sized Particles on the Tensile Ductility of SiC p /Al Metal Matrix Composites
Source abstract
Abstract
The influences of the SiCp, constituents, and precipitates on the tensile ductility of SiCp/Al metal matrix composites have been investigated through both modeling and experimental studies. It has been shown that the model predictions are in good agreement with the experimental data when testing on SiCp/Al-Cu-Mg composites. After coupled with the aging-hardening behavior of the composites, the model can be used to predict the evolution of the tensile ductility as a function of the aging time and aging temperature. It has been shown that the tensile ductility of the composites decreases with the increase in the volume fractions of the SiCp, constituents, and precipitates. Concerning the cracking phases (including both the SiCp and constituents), the SiC particles have a greater effect on the tensile ductility than do the constituents, due to the relatively larger volume fraction. During aging, the tensile ductility decreases as the aging time increases, and reaches the minimum value at the peak-aged stage. Then, the tensile ductility increases. The evolution of the tensile ductility is also sensitive to the aging temperature. Increasing the aging temperature can accelerate the decreasing velocity and increase the minimum value of the tensile ductility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. T.W. Clyne: An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, United Kingdom, 1993, p. 110.1017/CBO9780511623080 ↗
2. D.J. Lloyd: Int. Mater. Rev., 1994, vol. 39, p. 110.1179/imr.1994.39.1.1 ↗
3. P.J. Withers, W.M. Stobbs, O.B. Pedersen: Acta Metall., 1989, vol. 37, p. 306110.1016/0001-6160(89)90341-6 ↗
4. V.C. Nardone, K.M. Prewo: Scripta Metall., 1986, vol. 20, p. 4310.1016/0036-9748(86)90210-3 ↗
5. V.C. Nardone: Scripta Metall., 1987, vol. 21, p. 131310.1016/0036-9748(87)90105-0 ↗
6. G.T. Hahn, A.R. Rosenfield: Metall. Trans. A, 1975, vol. 6A, p. 65310.1007/BF02672285 ↗
7. D.S. Thompson: Metall. Trans. A, 1975, vol. 6A, p. 67110.1007/BF02672287 ↗
8. G.G. Garrett, J.F. Knott: Metall. Trans. A, 1978, vol. 9A, p. 118710.1007/BF02652242 ↗
9. G. Liu, G.J. Zhang, R.W. Wang, W. Hu, J. Sun, K.H. Chen: Acta Mater., 2007, vol. 55, p. 27310.1016/j.actamat.2006.08.026 ↗
10. G. Liu, J. Sun, C.W. Nan, K.H. Chen: Acta Mater., 2005, vol. 53, p. 345910.1016/j.actamat.2005.04.002 ↗
11. G. Liu, G.J. Zhang, X.D. Ding, J. Sun, K.H. Chen: Metall. Mater. Trans. A, 2004, vol. 35, p. 172510.1007/s11661-004-0081-0 ↗
12. G. Liu, G.J. Zhang, X.D. Ding, J. Sun, K.H. Chen: Mater. Sci. Technol., 2003, vol. 19, p. 88710.1179/026708303225004314 ↗
13. M.F. Ashby: Phil. Mag., 1970, vol. 21, p. 39910.1080/14786437008238426 ↗
14. T.W. Clyne: Mater. Sci. Eng. A, 1989, vol. 122, p. 18310.1016/0921-5093(89)90629-1 ↗
15. J.W. Hutchinson: J. Mech. Phys. Solids, 1968, vol. 16, p. 1310.1016/0022-5096(68)90014-8 ↗
16. J.R. Rice, G.F. Rosengrn: J. Mech. Phys. Solids, 1968, vol. 16, p. 110.1016/0022-5096(68)90013-6 ↗
17. M.F. Kanninen, C.H. Popelar: Advanced Fracture Mechanics, Oxford University Press, New York, NY, 1985, p. 300
18. K.S. Chan: Acta Metall. Mater., 1995, vol. 43, p. 432510.1016/0956-7151(95)00133-G ↗
19. V.C. Srivastava, A. Schneider, V. Uhlenwinkel, K. Bauckhage: Mater. Sci. Eng. A, 2005, vol. 412, p. 1910.1016/j.msea.2005.09.002 ↗
20. V.K. Varma, Y.R. Mahajan, V.V. Kutumbarao: Scripta Mater., 1997, vol. 37, p. 48510.1016/S1359-6462(97)00107-3 ↗
21. R.J. Arsenault, S.B. Wu: Scripta Metall., 1988, vol. 22, p. 76710.1016/S0036-9748(88)80046-2 ↗
22. L. Mishnaevsky, K. Derrien, and D. Baptiste: Comp. Sci. Technol., 2004, vol. 64, p. 180510.1016/j.compscitech.2004.01.013 ↗
23. A.B. Pandey, B.S. Majumdar, D.B. Miracle: Metall. Mater. Trans. A, 2000, vol. 31A, p. 92110.1007/s11661-000-0035-0 ↗
24. A.B. Pandey, B.S. Majumdar, D.B. Miracle: Metall. Mater. Trans. A, 2000, vol. 31, p. 93710.1007/s11661-000-0035-0 ↗
25. L.M. Russell, M.F. Ashby: Acta Metall., 1970, vol. 18, p. 89110.1016/0001-6160(70)90017-9 ↗
26. J.M.G. Crompton, R.M. Waghorne, C.B. Brook Jr.: Br. J. Appl. Phys., 1966, vol. 16, p. 277
27. D.L. Gilmore, R.M. Starker Jr.: Metall. Mater. Trans. A, 1997, vol. 28A, p. 139910.1007/s11661-997-0203-6 ↗
28. J.W. Edington: Practical Electron Microscopy in Materials Science, Von Norstrand Reinhold Company, London, 1976, p. 207
29. M. Song, X. Li, K.H. Chen: Metall. Mater. Trans. A, 2007, vol. 34A, p. 63810.1007/s11661-006-9064-7 ↗
30. T.J.A. Doel, P. Bowen: Compos. Part A, 1996, vol. 27A, p. 65510.1016/1359-835X(96)00040-1 ↗
31. N. Chawla, C. Andres, J.W. Jones, J.E. Allison: Metall. Mater. Trans. A, 1998, vol. 29A, p. 284310.1007/s11661-998-0325-5 ↗
32. L.X. Lu, J. Bi, L.Q. Chen, M.J. Zhao: Acta Metall. Sinica, 1998, vol. 34, p. 1188
33. M.T. Milan, P. Bowen: J. Mater. Eng. Performance, 2004, vol. 13, p. 61210.1361/10599490420638 ↗
34. M.T. Milan, P. Bowen: J. Mater. Eng. Performance, 2004, vol. 13, p. 77510.1361/10599490421358 ↗
35. L. Zu, S. Luo: J. Mater. Proc. Technol., 2001, vol. 114, p. 18910.1016/S0924-0136(01)00738-5 ↗