Effect of the lamellar grain size on plastic flow behavior and microstructure evolution during hot working of a gamma titanium aluminide alloy
Source abstract
Abstract
The kinetics of dynamic spheroidization of the lamellar microstructure and the associated flow-softening behavior during isothermal, constant-strain-rate deformation of a gamma titanium aluminide alloy were investigated, with special emphasis on the role of the prior-alpha grain/colony size. For this purpose, fully lamellar microstructures with prior-alpha grain sizes between 80 and 900 µm were developed in a Ti-45.5Al-2Nb-2Cr alloy using a special forging and heat-treatment schedule. Isothermal hot compression tests were conducted at 1093 °C and strain rates of 0.001, 0.1, and 1.0 s−1 on specimens with different grain sizes. The flow curves from these tests showed a very strong dependence of peak flow stress and flow-softening rate on grain size; both parameters increased with alpha grain/colony size. Microstructures of the upset test specimens revealed the presence of fine, equiaxed grains of γ + α 2 + β phases resulting from the dynamic spheroidization process that initiated at and proceeded inward from the prior-alpha grain/colony boundaries. The grain interiors displayed evidence of microkinking of the lamellae. The frequency and severity of kinking increased with strain, but were also strongly dependent on the local orientation of lamellae with respect to the compression axis. The kinetics of dynamic spheroidization were found to increase as the strain rate decreased for a given alpha grain size and to decrease with increasing alpha grain size at a given strain rate. The breakdown of the lamellar structure during hot deformation occurred through a combination of events, including shear localization along grain/colony boundaries, microbuckling of the lamellae, and the formation of equiaxed particles of γ + β 2 + α 2 on grain/colony boundaries and in zones of localized high deformation within the microbuckled regions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Metallurgy and Material Forming · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. S.L. Semiatin, V. Seetharaman, and V.K. Jain: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2753–68.10.1007/BF02649227 ↗
2. S.L. Semiatin and V. Seetharaman: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 371–81.10.1007/BF02664673 ↗
3. S.L. Semiatin, V. Seetharaman, and I. Weiss: in Advances in the Science and Technology of Titanium Alloy Processing, I. Weiss, R. Srinivasan, P.J. Bania, D. Eylon, and S.L. Semiatin, eds., TMS-AIME, Warrendale, PA, 1997, pp. 3–73.
4. Y.-W. Kim and D.M. Dimiduk: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS-AIME, Warrendale, PA, 1997, pp. 531–43.
5. S.L. Semiatin, V. Seetharaman, and I. Weiss: Mater. Sci. Eng. A, 1998, vol. A243, pp. 1–24.10.1016/S0921-5093(97)00776-4 ↗
6. M. Nobuki, K. Hashimoto, J. Takahashi, and T. Tsujimoto: Mater. Trans. JIM, 1990, vol. 31, pp. 814–19.10.2320/matertrans1989.31.814 ↗
7. H. Oikawa and K. Maruyama: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS-AIME, Warrendale, PA, 1995, pp. 919–30.
8. T.A. Parthasarathy, M.G. Mendiratta, and D.M. Dimiduk: Scripta Mater., 1997, vol. 37, pp. 315–21.10.1016/S1359-6462(97)00099-7 ↗
9. J. Beddoes, L. Zhao, P. Au, D. Dudzinski, and J. Triantafillou: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS-AIME, Warrendale, PA, 1997, pp. 109–18.
10. J.A. Wert and M.F. Bartholomeusz: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 127–34.10.1007/BF02647753 ↗
11. M.F. Bartholomeusz and J.A. Wert: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2371–81.10.1007/BF02648857 ↗
12. M.F. Bartholomeusz, Q. Yang, and J.A. Wert: Scripta Metall. Mater., 1993, vol. 29, pp. 389–94.10.1016/0956-716X(93)90518-W ↗
13. U. Hofmann and W. Blum: Scripta Metall. Mater., 1995, vol. 32, pp. 371–76.10.1016/S0956-716X(99)80067-3 ↗
14. E.M. Mielnik: Metal Working Science and Engineering, McGraw-Hill Publishing Company, New York, NY, 1990, p. 119.
15. J.E. Burke and D. Turnbull: Progr. Met. Phys., 1952, vol. 3, p. 220.10.1016/0502-8205(52)90009-9 ↗
16. D.M. Dimiduk, P.M. Hazzledine, T.A. Parthasarathy, S. Seshagiri, and M.G. Mendiratta: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 37–47.10.1007/s11661-998-0157-3 ↗
17. V. Seetharaman and S.L. Semiatin: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1987–2004.10.1007/BF02651948 ↗
18. S.L. Semiatin, N.D. Frey, S.M. El-Soudani, and J.D. Bryant: Metall. Trans. A, 1992, vol. 23A, pp. 1719–35.10.1007/BF02804366 ↗
19. G.E. Fuchs: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2543–53.10.1007/s11661-997-0012-y ↗
20. W. Roberts: in Deformation, Processing, and Structure, G. Krauss, ed., ASM, Metals Park, OH, 1984, pp. 109–84.
21. T. Sakai and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 189–209.10.1016/0001-6160(84)90049-X ↗
22. V. Seetharaman and C.M. Lombard: in Microstructure/Property Relationships in Titanium Aluminides and Alloys, Y.-W. Kim and R.R. Boyer, eds., TMS, Warrendale, PA, 1991, pp. 237–51.
23. D.S. Shih and G.K. Scarr: in High Temperature Ordered Intermetallic Alloys IV, L.A. Johnson, D.P. Pope, and J.O. Steigler, eds., MRS, Pittsburgh, PA, 1991, pp. 727–32.
24. V. Seetharaman and S.L. Semiatin: Wright Laboratory, Wright-Patterson Air Force Base, OH, unpublished research, 1993.
25. S. Sriram, G.B. Viswanathan, and V.K. Vasudevan: in Twinning in Advanced Materials, M.H. Yoo and M. Wuttig, eds., TMS, Warrendale, PA, 1994, pp. 383–94.
26. H.J. McQueen and J.J. Jonas: in Treatise on Materials Science and Technology, R.J. Arsenault, ed., Academic Press, New York, NY, 1975, pp. 393–493.
27. F.J. Humphreys and M. Hatherly: Recrystallization and Annealing Phenomena, Pergamon Press, Oxford, U.K., 1996, pp. 363–93.
28. D.A. Hardwick and P.L. Martin: in Advances in the Science and Technology of Titanium Alloy Processing, I. Weiss, R. Srinivasan, P.J. Bania, D. Eylon, and S.L. Semiatin, eds., TMS-AIME, Warrendale, PA, 1996, pp. 153–60.
29. D.L. Anton: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS-AIME, Warrendale, PA, 1997, pp. 369–76.
30. P.L. Martin, D.A. Hardwick, D.R. Clemens, W.A. Konkel, and M.A. Stucke: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS-AIME, Warrendale, PA, 1997, pp. 387–94.
31. P. Wang, G.B. Viswanathan, and V.K. Vasudevan: Metall. Trans. A, 1993, vol. 23A, pp. 690–97.
32. S.A. Jones and M.J. Kaufman: Acta Metall. Mater., 1993, vol. 41, pp. 387–98.10.1016/0956-7151(93)90069-5 ↗
33. N. Takeyama, T. Kumagai, M. Nakamura, and M. Kikuchi: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 167–76.
34. T.H. Courtney: Mechanical Behavior of Materials, McGraw-Hill Publishing Company, New York, NY, 1990.
35. H.A. Lipsitt, D. Schectman, and R.E. Schafrik: Metall. Trans. A, 1975, vol. 6A, p. 1991.10.1007/BF03161822 ↗
36. S. Kroll, H. Mehrer, N.A. Stalwijk, C. Herzig, R. Rosenkranz, and G. Frommeyer: Z. Metallkde., 1992, vol. 83, p. 593.
37. A.K. Mukherjee: in Plastic Deformation and Fracture of Materials, H. Mughrabi, ed., vol. 6, Materials Science and Technology, R.W. Cahn, P. Haasen, and E.J. Kramer, eds., VCH Publishers Inc., New York, NY, 1993, pp. 407–60.
38. O.D. Sherby and J. Wadsworth: Progr. Mater. Sci., 1989, vol. 33, pp. 169–221.10.1016/0079-6425(89)90004-2 ↗
39. T.G. Langdon: Phil. Mag., 1970, vol. 22, p. 689.10.1080/14786437008220939 ↗
40. R.C. Gifkins: in Superplastic Forming of Structural Alloys, N.E. Paton and C.H. Hamilton, eds., TMS-AIME, Warrendale, PA, 1982, pp. 3–26.
41. M.J. Mayo and W.D. Nix: Acta Metall., 1989, vol. 37, p. 1121.10.1016/0001-6160(89)90108-9 ↗
42. J.R. Springarn and W.D. Nix: Acta Metall., 1978, vol. 26, p. 1389.10.1016/0001-6160(78)90154-2 ↗
43. S.L. Semiatin and G.D. Lahoti: Metall. Trans. A, 1981, vol. 12A, pp. 1705–17.10.1007/BF02643753 ↗
44. O.D. Sherby, M.J. Harrigan, L. Chamagne, and C. Sauve: Trans. ASM, 1969, vol. 62, pp. 575–80.
45. B.J. Shaw: Acta Metall., 1967, vol. 15, pp. 1169–77.10.1016/0001-6160(67)90391-4 ↗
46. H. Inui, M.H. Oh, A. Nakamura, and M. Yamaguchi: Acta Metall., 1992, vol. 40, pp. 3095–3104.10.1016/0956-7151(92)90472-Q ↗
47. K.H.G. Ashbee and S.L. Semiatin: Wright Laboratory, Wright-Patterson Air Force Base, OH, unpublished research, 1995.
48. J.P. Sah, G.J. Richardson, and C.M. Sellars: Met. Sci., 1974, vol. 8, p. 325.10.1179/msc.1974.8.1.325 ↗
49. W. Roberts, H. Boden, and B. Ahlblom: Met. Sci., 1979, vol. 13, p. 195.10.1016/0036-9748(79)90292-8 ↗
50. J.E. Bailey and P.B. Hirsch: Proc. R. Soc., 1962, vol. A267, p. 11.