journal article·2004-06

A metallurgical interpretation of the static recrystallization kinetics of an intercritically deformed C-Mn steel

Haiwen Luo, Jilt Sietsma, Sybrand Van Der Zwaag

Publisher page

Abstract

The austenite recrystallization kinetics in the intercritical region of a C-Mn steel is investigated by means of stress relaxation tests. It is found that the Avrami exponent, n, decreases significantly with decreasing temperature, i.e., with increasing ferrite fraction. This behavior deviates from that of austenite recrystallization in the purely austenitic state, in which case the Avrami exponent is constant and independent of temperature. To resolve the origin of the changing Avrami exponent, the influence of the austenite/ferrite interface boundary area and that of the spatial variation of the plastic strain in the austenite grains is modeled quantitatively. The modeling results seem to indicate that the strain heterogeneity rather than the reduced interface boundary length is responsible for the decreasing Avrami exponent with decreasing temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. L.P. Karjalainen, T.A. Maccagno, and J.J. Jonas: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 1523–31.10.2355/isijinternational.35.1523 ↗
2. L.P. Karjalainen and J. Perttula: Iron Steel Inst. Jpn. Int., 1996, vol. 36, pp. 729–73.10.2355/isijinternational.36.729 ↗
3. A. Laasoraoui and J.J. Jonas: Metall. Trans. A, 1991, vol. 20A, pp. 151–60.10.1007/BF03350957 ↗
4. W.P. Sun and E.B. Hawbolt: Iron Steel Inst. Jpn. Int., 1997, vol. 37, pp. 1000–09.10.2355/isijinternational.37.1000 ↗
5. S.F. Medina and A. Quispe: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 774–81.10.2355/isijinternational.41.774 ↗
6. F.J. Humphreys and M. Hatherly: Recrystallisation and Related Annealing Phenomena, Elsevier Science Ltd., Oxford, United Kingdom, 1995, pp. 16–17, 178, and 188–204.
7. E.A. Simielli, S. Yue, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 597–608.10.1007/BF02801177 ↗
8. R. Wang and T.C. Lei: Mater. Sci. Eng., 1993, vol. A165, pp. 19–27.10.1016/0921-5093(93)90622-L ↗
9. A. Bodin: Ph.D. Thesis, Delft University of Technology, The Netherlands, 2002.
10. A. Bodin, J. Sietsma, and S. van der Zwaag: Scripta Mater., 2001, vol. 45, pp. 875–82.10.1016/S1359-6462(01)01050-8 ↗
11. L.P. Karjalainen: Mater. Sci. Technol., 1995, vol. 11, pp. 557–64.10.1179/mst.1995.11.6.557 ↗
12. L.P. Karjalainen, J. Pettula, Y. Xu, and J. Niu: Proc. 7th Int. Symp. on Physical Simulation of Casting, Hot Rolling and Welding, National Research Institute for Metals, Tsukuba, Ibaraki, Japan, 1997, pp. 231–36.
13. H. Luo, D.N. Hanlon, J. Sietsma, and S. van der Zwaag: Due to be published in the 4th Int. Conf. on Physical and Numerical Simulation of Materials Processing, 2004, Shanghai, China.
14. Application note: Axisymmetric Uniaxial Compression Testing Using ISO-T Anvils on Gleeble Systems, DSI company, Poestenkill, NY, http://www.gleeble.com/AppNotes/AppNotes
15. J.W. Cahn: Acta Metall., 1956, vol. 4, pp. 449–59.10.1016/0001-6160(56)90041-4 ↗
16. R.A. Vandermeer and R.A. Masumura: Acta. Metall. Mater., 1992, vol. 40, pp. 877–86.10.1016/0956-7151(92)90031-9 ↗
17. R.A. Vandermeer and R.A. Masumura: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1513–18.
18. D.J. Srolovitz, G.S. Grest, M.P. Anderson, and A.D. Rollett: Acta Metall., 1988, vol. 36, pp. 2115–28.10.1016/0001-6160(88)90313-6 ↗
19. R.L. Goetz and V. Seetharaman: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2307–21.10.1007/s11661-998-0108-z ↗
20. W. Boas and M.E. Hargreaves: Proc. R. Soc., 1948, vol. A193, p. 89.