journal article·2002-07

Relationship between austenite dislocation density introduced during thermal cycling and M s temperature in an Fe-17 wt pct Mn alloy

Young-Kook Lee

Publisher page

Abstract

The reason why thermal cycling decreases the martensite start (M s ) temperature of an Fe-17 wt pct Mn alloy was quantitatively investigated, based on the nucleation model of e martensite and a thermodynamic model for a martensitic transformation. The M s temperature decreased by about 22 K after nine cycles between 303 and 573 K, due to the increase in shear-strain energy (ΔG sh ) required to advance the transformation dislocations through dislocation forests formed in austenite during thermal cycling. The ΔG sh value increased from 19.3 to 28.8 MJ/m3 due to the increase in austenite dislocation density from 1.5 × 1012 to 3.8 × 1013/m2 with the number of thermal cycles (in this case, up to nine cycles). The austenite dislocation density increased rapidly for up to five thermal cycles and then increased gradually with further thermal cycles, showing a good agreement with the increase in austenite hardness with the number of thermal cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. K. Tsuzaki, M. Ikegami, Y. Tomota, and T. Maki: Iron Steel Inst. Jpn. Int., 1990, vol. 30, pp. 666–73.10.2355/isijinternational.30.666 ↗
2. W. Jin and C.S. Choi: J. Kor. Inst. Met. Mater., 1992, vol. 30, pp. 68–75.
3. K. Tsuzaki, M. Ikegami, Y. Tomota, Y. Kurokawa, W. Nakagawara, and T. Maki: Mater. Trans. JIM, 1992, vol. 33, pp. 263–70.10.2320/matertrans1989.33.263 ↗
4. G.B. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7A, pp. 1897–1904.
5. K. Ishida: Scripta Metall., 1977, vol. 11, pp. 237–42.10.1016/0036-9748(77)90061-8 ↗
6. ASTM Standard Designation E112-88, 1994 Book of ASTM Standards, ASTM, Philadelphia, PA, 1994, vol. 3.01, p. 227.
7. B.D. Cullity: Elements of X-ray Diffraction, 2nd ed., Addison-Wesley Publishing Company, Inc., Reading, MA, 1978, p. 335.
8. L.D. Blackburn, L. Kaufman, and M. Cohen: Acta Metall., 1965, vol. 13, pp. 533–41.10.1016/0001-6160(65)90104-5 ↗
9. J.F. Breedis and L. Kaufman: Metall. Trans., 1971, vol. 2, pp. 2359–71.10.1007/BF02814874 ↗
10. Y.-K. Lee and C.S. Choi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 355–60.10.1007/s11661-000-0271-3 ↗
11. J.D. Eshelby: Proc. R. Soc., London, 1957, vol. A241, pp. 376–87.
12. A.P. Sutton and J.W. Christian: J. Phys., 1982, No. 4, pp. C4-197-C4-201.10.1051/jphyscol:1982424 ↗
13. T. Ericsson: Acta Metall., 1966, vol. 14, pp. 853–65.10.1016/0001-6160(66)90006-X ↗
14. P.H. Adler, G.B. Olson, and W.S. Owen: Metall. Trans. A, 1986, vol. 17A, pp. 1725–37.10.1007/BF02817271 ↗
15. K. Tsuzaki, S. Fukasaku, Y. Tomota, and T. Maki: Mater. Trans. JIM, 1991, vol. 32, pp. 222–29.10.2320/matertrans1989.32.222 ↗
16. J.E. Bailey and P.B. Hirsch: Phil. Mag., 1960, vol. 5, pp. 485–97.10.1080/14786436008238300 ↗
17. F.R.N. Nabarro, Z.S. Basinski, and D.B. Holt: Adv. Phys., 1964, vol. 13, pp. 193–323.10.1080/00018736400101031 ↗
18. S. Takaki, H. Nakatsu, and Y. Tokunaga: Mater. Trans., JIM, 1993, vol. 34, pp. 489–95.10.2320/matertrans1989.34.489 ↗
19. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill Press, New York, NY, 1976, p. 144.
20. S. Takaki: The Advanced of Strengthening Technology in Steel Products, Iron and Steel Institute of Japan, Tokyo, 1992, p. 7.
21. L.A. Norström: Met. Sci., 1976, vol. 10, pp. 429–36.10.1179/030634576790431868 ↗