Low-Temperature Nitriding of Deformed Austenitic Stainless Steels with Various Nitrogen Contents Obtained by Prior High-Temperature Solution Nitriding
Source abstract
Abstract
In the past decades, high nitrogen steels (HNS) have been regarded as substitutes for conventional austenitic stainless steels because of their superior mechanical and corrosion properties. However, the main limitation to their wider application is their expensive production process. As an alternative, high-temperature solution nitriding has been applied to produce HNS from three commercially available stainless steel grades (AISI 304L, AISI 316, and EN 1.4369). The nitrogen content in each steel alloy is varied and its influence on the mechanical properties and the stability of the austenite investigated. Both hardness and yield stress increase and the alloys remain ductile. In addition, strain-induced transformation of austenite to martensite is suppressed, which is beneficial for subsequent low-temperature nitriding of the surface of deformed alloys. The combination of high- and low-temperature nitriding results in improved properties of both bulk and surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. M.O. Speidel: HNS 88 Lille (France), The insitute of Metals, London, 1989, p. 92.
2. K. Frisk, M. Kikuchi, M. Kajihara: HNS 88 Lille (France), The Institute of Metals, London, 1989, p. 63.
3. M.L.G. Byrnes, M. Grujicic, and W.S. Owen: Acta Metall., 1987, vol. 35, pp. 1853–62.10.1016/0001-6160(87)90131-3 ↗
4. E. Werner: Mater. Sci. Eng., 1988, vol. 101, pp. 93–98.
5. J.W. Simmons: Mater. Sci. Eng. A, 1996, vol. 207, pp. 159–69.10.1016/0921-5093(95)09991-3 ↗
6. L.Å. Norström: Met. Sci., 1977, vol. 11, pp. 208–12.10.1179/msc.1977.11.6.208 ↗
7. Y. Takahashi, K. Yoshida, M. Shimada, and E. Tada: Adv. Cryog. Eng. Mater., 1982, vol. 28, pp. 73–81.10.1007/978-1-4613-3542-9_8 ↗
8. R.P. Reed: JOM, 1989, vol. 41, pp. 16–21.10.1007/BF03220991 ↗
9. J.R. Kearns and H.E. Deverell: Mater. Perform., 1987, vol. 26, pp. 18–28.
10. M. Janik-Czachor: Corrosion, 1975, vol. 31, pp. 394–98.10.5006/0010-9312-31.11.394 ↗
11. J.J. Eckenrod and C.W. Kovach: Properties of Austenitic Stainless Steels Their Weld Metals, American Society for Testing and Materials (ASTM), Philadelphia, 1979, pp. 17–41.10.1520/STP38350S ↗
12. M.O. Speidel: Materwiss. Werksttech., 2006, vol. 37, pp. 875–80.10.1002/mawe.200600068 ↗
13. A.H. Satir-Kolorz and H.K. Feichtinger: Zeitschrift Fuer Met. Res. Adv. Tech., 1991, vol. 82, pp. 689–97.
14. G. Stein and I. Hucklenbroich: Mater. Manuf. Process., 2004, vol. 19, pp. 7–17.10.1081/AMP-120027494 ↗
15. H. Berns: ISIJ Int., 1996, vol. 36, pp. 909–14.10.2355/isijinternational.36.909 ↗
16. H. Berns and S. Siebert: ISIJ Int., 1996, vol. 36, pp. 927–31.10.2355/isijinternational.36.927 ↗
17. Z.L. Zhang and T. Bell: Surf. Eng., 1985, vol. 1, pp. 131-136.10.1179/sur.1985.1.2.131 ↗
18. K. Ichii, K. Fujimura and T. Takase: Technology Reports of Kansai University, 1986, vol. 27, pp. 135-144.
19. A. Leyland, D.B. Lewis, P.R. Stevenson and A. Matthews: Surf. Coat. Techn., 1993, vol. 62, pp. 608-617.10.1016/0257-8972(93)90307-A ↗
20. T.L. Christiansen and M.A.J Somers: Int. J. Mater. Res. Former. Zeitschrift Fuer Met., 2009, vol. 100, pp. 1361–77.10.3139/146.110202 ↗
21. T. Bell: Key Eng. Mater., 2008, vol. 373-374, pp. 289–95.10.4028/www.scientific.net/KEM.373-374.289 ↗
22. H. Dong: Int. Mater. Rev., 2010, vol. 55, pp. 65–98.10.1179/095066009X12572530170589 ↗
23. M.A.J. Somers and T.L. Christiansen: in Thermochemical Surface Engineering of Steel, E.J Mittemeijer and M.A.J. Somers, eds., WoodHead Publishing, Cambridge, 2015, pp. 557–579.10.1533/9780857096524.4.557 ↗
24. Z. Yu, X.I. Xu, L. Wang, J. Qiang, and Z. Hei: Surf. Coatings Technol., 2002, vol. 153, pp. 125–30.10.1016/S0257-8972(01)01670-X ↗
25. M.K. Lei and X.M. Zhu: Surf. Coatings Technol., 2005, vol. 193, pp. 22–28.10.1016/j.surfcoat.2004.08.139 ↗
26. Y. Sun and T. Bell: Wear, 1998, vol. 218, pp. 34–42.10.1016/S0043-1648(98)00199-9 ↗
27. C.X. Li and T. Bell: Corros. Sci., 2004, vol. 46, pp. 1527–47.10.1016/j.corsci.2003.09.015 ↗
28. Committee of Stainless Steel Producers: Review of the Wear and Galling Characteristics of Stainless Steels, American Iron and Steel Institute, Washington, 1978.
29. M.A.J. Somers and T.L. Christiansen: J. Phase Equilibria Diffus., 2005, vol. 26, pp. 520–28.10.1007/s11669-005-0045-0 ↗
30. T. Bell: Surf. Eng., 2002, vol. 18, pp. 415–22.10.1179/026708402225006268 ↗
31. ASTM International: Standard Test Methods for Tension Testing of Metallic Materials [ Metric ], United States, 2004, p. E 8M – 04.
32. T.L. Christiansen, T.S. Hummelshøj, and M.A.J. Somers: WO2012 146254-A1, 2012.
33. T.L. Christiansen, T.S. Hummelshøj, and M.A.J. Somers: WO2013159781-A1, 2013.
34. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
35. K. Frisk: Metall. Trans. A, 1990, vol. 21, pp. 2477–88.10.1007/BF02646992 ↗
36. K. Frisk: Calphad, 1991, vol. 15, pp. 79–106.10.1016/0364-5916(91)90028-I ↗
37. K. Frisk: Mater. Sci. Forum, 1999, vol. 318-320, pp. 95–102.10.4028/www.scientific.net/MSF.318-320.95 ↗
38. F. Bottoli, G. Winther, T.L. Christiansen, and M.A.J. Somers: Metall. Mater. Trans. A, 2015, vol. 46, pp. 2579–90.10.1007/s11661-015-2832-5 ↗
39. F.A.P. Fernandes, T.L. Christiansen, and M.A.J. Somers: Proc. 28th Int. Conf. Surf. Modif. Technol., Valardocs, Tampere, Finland, 2014, pp. 223–33.
40. C. Blawert, B.L. Mordike, G.A. Collins, K.T. Short, Y. Jiraskova, O. Schneeweiss, and V. Perina: Surf. Coatings Technol., 2000, vol. 128-129, pp. 219–25.10.1016/S0257-8972(00)00651-4 ↗
41. C. Blawert, H. Kalvelage, B.L. Mordike, G.A. Collins, K.T. Short, Y. Jirásková, and O. Schneeweiss: Surf. Coatings Technol., 2001, vol. 136, pp. 181–87.10.1016/S0257-8972(00)01050-1 ↗
42. Z. Cheng, C.X. Li, H. Dong, and T. Bell: Surf. Coatings Technol., 2005, vol. 191, pp. 195–200.10.1016/j.surfcoat.2004.03.004 ↗
43. T.L. Christiansen and M.A.J. Somers: Surf. Interface Anal., 2005, vol. 21, pp. 445–55.
44. J. Oddershede, T.L. Christiansen, K. Ståhl, and M.A.J. Somers: Scr. Mater., 2010, vol. 62, pp. 290–93.10.1016/j.scriptamat.2009.11.021 ↗
45. J. Oddershede, T.L. Christiansen, K. Ståhl, and M.A.J. Somers: Steel Res. Int., 2011, vol. 82, pp. 1248–54.10.1002/srin.201100113 ↗
46. D.H. Jack and K.H. Jack: Mater. Sci. Eng., 1973, vol. 11, pp. 1–27.10.1016/0025-5416(73)90055-4 ↗
47. K. H. Jack: Acta Crystallogr., 1952, vol. 5, pp. 404–11.10.1107/S0365110X52001258 ↗
48. K.H. Jack: Proc. R. Soc., 1948, vol. A195, pp. 34–55.10.1098/rspa.1948.0100 ↗
49. K. H. Jack: Acta Crystallogr., 1950, vol. 3, pp. 392–94.10.1107/S0365110X50001075 ↗
50. H. Okamoto: J. Phase Equilibria, 1992, vol. 13, pp. 543–65.10.1007/BF02665767 ↗
51. K.J. Irvine, R. J. Llewellyn, and F. B. Pickering: JISI, 1961, vol. 199, p. 153.
52. Y. Nakada and A.S. Keh: Acta Metall., 1968, vol. 16, pp. 903–14.10.1016/0001-6160(68)90057-6 ↗
53. Y. Nakada and A.S. Keh: Metall. Trans., 1971, vol. 2, pp. 441–47.10.1007/BF02663332 ↗
54. A. Das: Metall. Mater. Trans. A, 2016, vol. 47, pp. 748-768.10.1007/s11661-015-3266-9 ↗
55. A.H. Cottrell and B.H. Bilby: Proc. Phys. Soc. Sect. A, 1948, vol. 62, pp. 49–62.10.1088/0370-1298/62/1/308 ↗
56. J.R. Cahoon, W.H. Broughton, and A.R. Kutzak: Metall. Trans., 1971, vol. 2, pp. 1979–83.10.1007/BF02913433 ↗
57. D. Tabor: Proc. R. Soc. A., 1948, vol. 192, p. 247.10.1098/rspa.1948.0008 ↗
58. V.G. Gavriljuk, H. Berns, C. Escher, N.I. Glavatskaya, A. Sozinov, and Yu.N. Petrov: Mater. Sci. Forum, 1999, vol. 318-320, pp. 455–60.10.4028/www.scientific.net/MSF.318-320.455 ↗
59. Q.X. Dai, X.N. Cheng, Y.T. Zhao, X.M. Luo, and Z.Z. Yuan: Mater. Char., 2004, vol.52, pp. 349-354.10.1016/j.matchar.2004.06.008 ↗
60. B.N. Mordyuk, G.I. Prokopenko, M.A. Vasylyev, and M.O. Lefimov: Mater. Sci. Eng. A, 2007, vol. 458, pp. 253–61.10.1016/j.msea.2006.12.049 ↗
61. T.S. Wang, B. Lu, M. Zhang, R.J. Hou, and F.C. Zhang: Mater. Sci. Eng. A, 2007, vol. 458, pp. 249–52.10.1016/j.msea.2006.12.066 ↗
62. F. Bottoli, M. S. Jellesen, T.L. Christiansen, G. Winther, and M.A.J. Somers: Electrochemical characterization and crevice corrosion performance of high temperature solid-solution nitrided and low-temperature nitrided austenitic stainless steel. Surf. Coat. Technol., submitted for publication.
63. M.A.J. Somers, R.M. Lankreijer, and E.J. Mittemeijer: Philos. Mag. A, 1989, vol. 59, pp. 353–78.10.1080/01418618908205064 ↗
64. P.M. Hekker, H.C.F. Rozendaal, and E. J. Mittemeijer: J. Mater. Sci., 1985, vol. 20, pp. 718–29.10.1007/BF01026547 ↗
65. P.C. Van Wiggen, H.C.F. Rozendaal, and E.J. Mittemeijer: J. Mater. Sci., 1985, vol. 20, pp. 4561–82.10.1007/BF00559347 ↗