journal article·2014-09Open access

Effects of Cooling Rate and Solute Content on the Grain Refinement of Mg-Gd-Y Alloys by Aluminum

Jichun Dai, Mark A. Easton, Mingxing Zhang, Dong Qiu, Xiangyuan Xiong, Wencai Liu, Guohua Wu

Abstract

The effect of Al additions on grain refinement of Mg-Gd-Y alloys with different solute contents at different cooling rates has been investigated. For all alloys, significant grain refinement was due to the formation of Al 2(Gd x Y1-x ) nucleant particles. The number density and size distribution of Al2(Gd x Y1-x ) were affected by both solute content and the cooling rate. Grain sizes (d gs) of Mg-Gd-Y base alloys and of Mg-Gd-Y-Al alloys were related to solute content (defined by the growth restriction factor, Q), cooling rate (Ṫ), and area number density (ρ ns) and size (d p) of nucleant particles that can be activated. It is found that grain sizes of Mg-Gd-Y base alloys follow the relationship dgs = a + b/Q√Ṫ, while grain sizes of Al-refined samples follow the relationship dgs = a′/√ρns + b′√Ṫ Qdp, where a, b, a′, and b′ were constants. In addition, the grain refinement effect of Al additions was more susceptible to solute content and the cooling rate than that of Zr which is regarded as the most efficient grain refiner for Mg alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. [1] D.H. StJohn, M.A. Easton, M. Qian, and J.A. Taylor: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2935–49.10.1007/s11661-012-1513-x ↗
2. [2] M. Easton and D. StJohn: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1911–20.10.1007/s11661-005-0054-y ↗
3. [3] M. Easton and D. StJohn: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1613–23.10.1007/s11661-999-0098-5 ↗
4. [4] D. Turnbull: Acta Metall., 1953, vo. 1, pp. 8–14.10.1016/0001-6160(53)90004-2 ↗
5. [5] A.L. Greer: Phil. Trans. R. Soc. Lond. A, 2003, vol. 361, pp. 479–95.10.1098/rsta.2002.1147 ↗
6. [6] D. Turnbull: J. Chem. Phys., 1950, vol. 18, pp. 198–203.10.1063/1.1747588 ↗
7. [7] A.L. Greer, A.M. Bunn, A. Tronche, P.V. Evans, and D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823–35.10.1016/S1359-6454(00)00094-X ↗
8. [8] T.E. Quested and A.L. Greer: Acta Mater., 2004, vol. 52, pp. 3859–68.10.1016/j.actamat.2004.04.035 ↗
9. [9] M. Easton and D. StJohn: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1625–33.10.1007/s11661-999-0099-4 ↗
10. [10] M.A. Easton and D.H. StJohn: Acta Mater., 2001, vol. 49, pp. 1867–78.10.1016/S1359-6454(00)00368-2 ↗
11. [11] D. StJohn, M. Qian, M. Easton, P. Cao, and Z. Hildebrand: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1669–79.10.1007/s11661-005-0030-6 ↗
12. [12] G. Chai, L. Backerud, and L. Arnberg: Mater. Sci. Technol., 1995, vol. 11, pp. 1099–103.10.1179/mst.1995.11.11.1099 ↗
13. [13] D. Eskin, Q. Du, D. Ruvalcaba, and L. Katgerman: Mater. Sci. Eng. A, 2005, vol. 405, pp. 1–10.10.1016/j.msea.2005.05.105 ↗
14. [14] X. Zeng, Y. Wang, W. Ding, A. Luo, and A. Sachdev: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1333–41.10.1007/s11661-006-1085-8 ↗
15. [15] M.A. Easton and D.H. StJohn: Mater. Sci. Eng. A, 2008, vol. 486, pp. 8–13.10.1016/j.msea.2007.11.009 ↗
16. [16] Y. Lü, Q. Wang, X. Zeng, W. Ding, C. Zhai, and Y. Zhu: Mater. Sci. Eng. A, 2000, vol. 278, pp. 66–76.10.1016/S0921-5093(99)00604-8 ↗
17. [17] J. Bai, Y. Sun, F. Xue, and J. Qiang: Mater. Sci. Eng. A, 2012, vol. 552, pp. 472–80.10.1016/j.msea.2012.05.072 ↗
18. [18] E.F. Emley: Principles of Magnesium Technology, Pergamon Press, Oxford, United Kingdom, 1966.
19. [19] I.A. Anyanwu, S. Kamado, and Y. Kojima: Mater. Trans., 2001, vol. 42, pp. 1212–18.10.2320/matertrans.42.1212 ↗
20. [20] T. Honma, T. Ohkubo, K. Hono, and S. Kamado: Mater. Sci. Eng. A, 2005, vol. 395, pp. 301–06.10.1016/j.msea.2004.12.035 ↗
21. [21] S.M. He, X.Q. Zeng, L.M. Peng, X. Gao, J.F. Nie, and W.J. Ding: J. Alloy. Compd., 2006, vol. 421, pp. 309–13.10.1016/j.jallcom.2005.11.046 ↗
22. [22] D. Qiu, M.X. Zhang, J.A. Taylor, and P.M. Kelly: Acta Mater., 2009, vol. 57, pp. 3052–59.10.1016/j.actamat.2009.03.011 ↗
23. [23] J. Dai, M. Easton, S. Zhu, G. Wu, and W. Ding: J. Mater. Res., 2012, vol. 27, pp. 2790–97.10.1557/jmr.2012.313 ↗
24. [24] J. Dai, S. Zhu, M.A. Easton, M. Zhang, D. Qiu, G. Wu, W. Liu, and W. Ding: Mater. Sci. Eng. A, 2013, vol. 576, pp. 298–305.10.1016/j.msea.2013.04.016 ↗
25. [25] M. Johnsson: Z. Metallkd., 1994, vol. 85, pp. 781–85.
26. S. Cashion, N. Ricketts, and R. Bailey: Proceedings of the 6th International Conference Magnesium Alloys and Their Applications, Wiley, 2004, pp. 995–1000.10.1002/3527603565.ch154 ↗
27. L. Backerud, E. Krol, and J. Tamminen: Solidification Characteristics of Aluminium Alloys, vol. 1, Skanaluminium, Universitetsforlaget As, Oslo, 1986.
28. [28] M. Easton, C. Davidson, and D. St John: Metall. Mater. Trans. A, 2010, vol. 41, pp. 1528–38.10.1007/s11661-010-0183-9 ↗
29. [29] M. Easton, C. Davidson, and D. StJohn: Mater. Trans., 2011, vol. 52, pp. 842–47.10.2320/matertrans.L-MZ201118 ↗
30. [30] Z.K. Peng, X.M. Zhang, J.M. Chen, Y. Xiao, H. Jiang, Mater. Sci. Technol., 2005, vol. 21, pp. 722–26.10.1179/174328405X43153 ↗
31. [31] M. Sun, G. Wu, J. Dai, W. Wang, and W. Ding: J. Alloy. Compd., 2010, vol. 494, pp. 426–33.10.1016/j.jallcom.2010.01.069 ↗
32. [32] L. Gao, R.S. Chen, and E.H. Han: J. Mater. Sci., 2009, vol. 44, pp. 4443–54.10.1007/s10853-009-3672-8 ↗
33. [33] D.H. StJohn, P. Cao, M. Qian, and M.A. Easton: Adv. Eng. Mater., 2007, vol. 9, pp. 739–46.10.1002/adem.200700157 ↗
34. [34] A. Tronche and A.L. Greer: Phil. Mag. Lett., 2001, vol. 81, pp. 321–28.10.1080/09500830110041648 ↗
35. [35] D. Qiu and M.X. Zhang: J. Alloy. Compd., 2009, vol. 488, pp. 260–64.10.1016/j.jallcom.2009.08.100 ↗
36. [36] D.H. StJohn, M. Qian, M.A. Easton, and P. Cao: Acta Mater., 2011, vol. 59, pp. 4907–21.10.1016/j.actamat.2011.04.035 ↗
37. [37] E.E. Underwood: Quantitative Stereology, Addison-Wesley, Reading, MA, 1970.
38. [38] A.A. Nayeb-Hashemi and J.B. Clark: Phase Diagrams of Binary Magnesium Alloys, ASM International, Materials Park, OH, 1988.
39. [39] P. Cao, M. Qian, and D.H. StJohn: Scripta Mater., 2007, vol. 56, pp. 633–36.10.1016/j.scriptamat.2006.12.009 ↗
40. [40] M. Sun, M.A. Easton, D.H. Stjohn, G. Wu, T.B. Abbott, and W. Ding: Adv. Eng. Mater., 2013, vol. 15, pp. 373–78.10.1002/adem.201200297 ↗
41. [41] H.W. Chang, D. Qiu, J.A. Taylor, M.A. Easton, and M.X. Zhang: J. Magnesium Alloy., 2013, vol. 1, pp. 115–21.10.1016/j.jma.2013.07.006 ↗
42. [42] D. Qiu and M.X. Zhang: Mater. Sci. Forum, 2010, vols. 654–656, pp. 671–74.10.4028/www.scientific.net/MSF.654-656.671 ↗
43. [43] S.M. Zhu, B.L. Mordike, and J.F. Nie: Mater. Sci. Eng. A, 2008, vols. 483–484, pp. 583–86.10.1016/j.msea.2006.09.154 ↗
44. [44] S. Pang, G. Wu, W. Liu, M. Sun, Y. Zhang, Z. Liu, and W. Ding: Mater. Sci. Eng. A, 2013, vol. 562, pp. 152–60.10.1016/j.msea.2012.11.016 ↗
45. [45] M. Qian and D.H. Stjohn: International Journal of Cast Metals Research, 2009, vol. 22, pp. 256–59.10.1179/136404609X367885 ↗
46. [46] P. Villars and L.D. Calvert: Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, 2ed ed., ASM International, Materials Park, OH, 1991.
47. [47] M. Qian, D.H. StJohn, and M.T. Frost: Mater. Sci. Forum, 2003, vols. 419–422, pp. 593-98.10.4028/www.scientific.net/MSF.419-422.593 ↗
48. [48] P. Cao, M. Qian, D.H. StJohn, and M.T. Frost: Mater. Sci. Technol., 2004, vol. 20, pp. 585-92.10.1179/026708304225012314 ↗
49. [49] M. Qian: Acta Mater., 2006, vol. 54, pp. 2241-52.10.1016/j.actamat.2006.01.022 ↗
50. M. Sun, G. Wu, M. Easton, D. StJohn, T. Abbott, and W. Ding: 9th International Conference on Magnesium Alloys and their Applications, 2012, pp. 873–80.
51. M. Qian, D.H. StJohn, and M.T. Frost: Proceedings of the 6th International Conference Magnesium Alloys and Their Applications, Wiley, New York, 2003, pp. 706–12.10.1002/3527603565.ch112 ↗