In-situ microfracture observation of strip-cast Zr-Ti-Cu-Ni-Be bulk metallic glass alloys
Source abstract
Abstract
In this study, Zr-Ti-Cu-Ni-Be bulk metallic glass (BMG) alloys containing a small amount of crystalline phase particles were fabricated by strip casting, and their improvement of mechanical properties and fracture toughness was explained by direct observation of the microfracture process. The compressive and fracture toughness test results indicated that strength, strain to failure, and fracture toughness of the strip-cast BMG alloy containing coarse crystalline particles were higher than those of the as-cast monolithic BMG alloy or the strip-cast BMG alloy containing fine crystalline particles. From in-situ microfracture observations, the improvement of overall mechanical properties of the strip-cast BMG alloy containing coarse crystalline particles could be interpreted by taking consideration of both the existence of coarse crystalline particles and the role of the particles to block crack propagation and to form multiple shear bands. Such property improvement suggests new applicability of the strip-cast BMG alloys containing coarse crystalline particles, which can work as toughening and strengthening reinforcements, to structures and components requiring excellent mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A. Inoue, T. Zhang, and T. Masumoto: Mater. Trans., JIM, 1990, vol. 31, pp. 425–28.10.2320/matertrans1989.31.425 ↗
2. A. Inoue, T. Nakamura, N. Nishiyama, and T. Masumoto: Mater. Trans., JIM, 1992, vol. 33, pp. 937–45.10.2320/matertrans1989.33.937 ↗
3. W.B. Kim, B.J. Ye, and S. Yi: Met. Mater.-Int., 2004, vol. 10, pp. 1–5.10.1007/BF03027356 ↗
4. A. Peker and W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342–44.10.1063/1.110520 ↗
5. X.H. Lin and W.L. Johnson: J. Appl. Phys., 1995, vol. 78, pp. 6514–19.10.1063/1.360537 ↗
6. A. Inoue: Acta Mater., 2000, vol. 48, pp. 279–306.10.1016/S1359-6454(99)00300-6 ↗
7. T.K. Han, S.J. Kim, Y.S. Yang, A. Inoue, Y.H. Kim, and I.B. Kim: Met. Mater.-Int., 2001, vol. 7, pp. 91–94.10.1007/BF03026945 ↗
8. Y.S. Park, S.B. Lee, and N.J. Kim: Mater. Trans., 2003, vol. 44, pp. 2617–24.10.2320/matertrans.44.2617 ↗
9. H.A. Bruck, A.J. Rosakis, and W.L. Johnson: J. Mater. Res., 1996, vol. 11, pp. 503–11.10.1557/JMR.1996.0060 ↗
10. R.D. Conner, A.J. Rosakis, W.L. Johnson, and D.M. Owen: Scripta Mater., 1997, vol. 37, pp. 1373–78.10.1016/S1359-6462(97)00250-9 ↗
11. C.J. Gilbert, R.O. Ritchie, and W.L. Johnson: Appl. Phys. Lett., 1997, vol. 71, pp. 476–78.10.1063/1.119610 ↗
12. P. Lowhaphandu and J.J. Lewandowski: Scripta Mater., 1998, vol. 38, pp. 1811–17.10.1016/S1359-6462(98)00102-X ↗
13. K.M. Flores and R.H. Dauskardt: Acta Mater., 2001, vol. 49, pp. 2527–37.10.1016/S1359-6454(01)00125-2 ↗
14. K.M. Flores and R.H. Dauskart: Scripta Mater., 1999, vol. 41, pp. 937–43.10.1016/S1359-6462(99)00243-2 ↗
15. C. Fan, C. Li, A. Inoue, and V. Haas: Phys. Rev. B., 2000, vol. 61, pp. R3761–R3763.10.1103/PhysRevB.61.R3761 ↗
16. H. Choi-Yim, R. Busch, U. Koster, and W.L. Johnson: Acta Mater., 1999, vol. 47, pp. 2455–62.10.1016/S1359-6454(99)00103-2 ↗
17. R.B. Dandliker, R.D. Conner, and W.L. Johnson: J. Mater. Res., 1998, vol. 13, pp. 2896–901.10.1557/JMR.1998.0396 ↗
18. T.C. Hufnagel, C. Fan, R.T. Ott, J. Li, and S. Brennan: Intermetallics, 2002, vol. 10, pp. 1163–66.10.1016/S0966-9795(02)00157-7 ↗
19. C.C. Hays, C.P. Kim, and W.L. Johnson: Mater. Sci. Eng. A, 2001, vols. A304–A306, pp. 650–55.10.1016/S0921-5093(00)01557-4 ↗
20. S.S. Park, Y.S. Park, and N.J. Kim: Met. Mater. Int., 2002, vol. 8, pp. 551–54.10.1007/BF03027008 ↗
21. ASTM Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, ASTM E399-83, ASTM, Philadelphia, PA, 1983, pp. 2213–23.
22. R.O. Ritchie and R.M. Horn: Metall. Trans. A, 1978, vol. 9A, pp. 331–41.10.1007/BF02646382 ↗
23. Y.H. Kim, D. Kwon, and S. Lee: Acta Metall., 1994, vol. 42, pp. 1887–91.10.1016/0956-7151(94)90013-2 ↗
24. S. Lee, K.S. Sohn, C.G. Lee, and B.I. Jung: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 123–34.10.1007/s11661-997-0088-4 ↗
25. J.G. Lee, S.S. Park, Y.S. Park, and N.J. Kim: J. Metastable Nanocryst. Mater., 2003, vols. 15–16, pp. 43–48.10.4028/www.scientific.net/JMNM.15-16.43 ↗
26. Q. Wei, N. Wanderka, P. Schubert-Bischoff, M.P. Macht, and S. Friedrich: J. Mater. Res., 2000, vol. 15, pp. 1729–34.10.1557/JMR.2000.0249 ↗
27. K.T. Faber and A.G. Evans: Acta Metall., 1983, vol. 31, pp. 577–84.10.1016/0001-6160(83)90047-0 ↗
28. T.H. Tuan: J. Eur. Ceram. Soc., 2000, vol. 20, pp. 895–99.10.1016/S0955-2219(99)00213-7 ↗
29. C.C. Hays, C.P. Kim, and W.L. Johnson: Phys. Rev. Lett., 2000, vol. 84, pp. 2901–04.10.1103/PhysRevLett.84.2901 ↗