Heterogeneity of the Nugget Microstructure in a Thick 2050 Al Friction-Stirred Weld
Source abstract
Abstract
The current article deals with 19-mm-thick welds of AA 2050. These joints obtained by friction stir butt welding on half penetration were subsequently strained and artificially aged. The nugget’s hardness weakens along the plate thickness from the top surface. This evolution is explained by the modification of the precipitation state, which overcomes the effects of the changes of size and preferred orientation of grains along the nugget’s depth. This modification of microstructure arises from the various strains, strain rates, and temperatures encountered in the different areas in the nugget. The postwelding treatment did not manage to suppress either the undermatching of the original nugget compared to the base material or the differences of thermal stabilities at the different depths in the nugget.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. R.J. Rioja and J. Liu: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3325–37.10.1007/s11661-012-1155-z ↗
2. N.E. Prasad, A.A. Gokhale, and R.J.H. Wanhill: Aluminium-Lithium Alloys: Processing, Properties and Applications, Butterworth-Heinemann, Oxford, United Kingdom, 2014.
3. S.C. Wang and M.J. Starink: Int. Mater. Rev., 2005, vol. 50, pp. 193–215.10.1179/174328005X14357 ↗
4. P.L. Threadgill, A.J. Leonard, H.R. Shercliff, and P.J. Withers: Int. Mater. Rev., 2009, vol. 54 (2), pp. 49–93.10.1179/174328009X411136 ↗
5. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
6. R.S. Mishra and M.W. Mahoney: Friction Stir Welding and Processing, ASM INTERNATIONAL, Materials Park, OH, 2007.
7. R.W. Fonda and J.F. Bingert: Scripta Mater., 2007, vol. 57, pp. 1052–55.10.1016/j.scriptamat.2007.06.068 ↗
8. R.W. Fonda, K.E. Knipling, and J.F. Bingert: Scripta Mater., 2007, vol. 58, pp. 343–48.10.1016/j.scriptamat.2007.09.063 ↗
9. K.N. Krishnan: Mater. Sci. Eng. A, 2002, vol. A327, pp. 246–51.10.1016/S0921-5093(01)01474-5 ↗
10. D.P. Yan: Thesis, Auckland University of Technology, Auckland, New Zealand, 2008.
11. K. Colligan, I. Ucok, K. McTernan, P. Konkol, and J.R. Pickens: Proc. 3rd Int. Symp. on Friction Stir Welding, Kobe Exhibition Center, Port Island, Kobe, Japan, 2001.
12. M.M.Z. Ahmed, B.P. Wynne, W.M. Rainforth, and P.L. Threadgill: Scripta Mater., 2008, vol. 59, pp. 507–10.10.1016/j.scriptamat.2008.04.047 ↗
13. V. Proton, J. Alexis, E. Andrieu, J. Delfosse, M.-C. Lafont, and C. Blanc: Corr. Sci., 2013, vol. 73, pp. 130–42.10.1016/j.corsci.2013.04.001 ↗
14. M.-N. Avettand-Fènoël, R. Taillard, J. Laye, and T. Odièvre: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 563–78.10.1007/s11661-013-2015-1 ↗
15. E.A. Brandes and G.B. Brook: Smithells Metals Reference Book, Butterworth-Heinemann, Oxford, United Kingdom, 1992.
16. P. Lequeu, K.P. Smith, and A. Daniélou: J. Mater. Eng. Perform., 2010, vol. 19(6), pp. 841–47.10.1007/s11665-009-9554-z ↗
17. V. Proton, J. Alexis, E. Andrieu, C. Blanc, J. Delfosse, L. Lacroix, and G. Odemer: J. Electrochem. Soc., 2011, vol. 158 (5), pp. C139–C147.10.1149/1.3562206 ↗
18. D. Tsivoulas, J.D. Robson, C. Sigli, and P.B. Prangnell: Acta Mater., 2012, vol. 60, pp. 5245–59.10.1016/j.actamat.2012.06.012 ↗
19. F. De Geuser, F. Bley, A. Denquin, and A. Deschamps: XIV Int. Conf. on Small-Angle Scattering (SA 2009), J. Phys.: Conf. Ser. 247, 2010, p. 012034.10.1088/1742-6596/247/1/012034 ↗
20. G. Pouget and A. Reynolds: Int. J. Fatigue, 2008, vol. 30, pp. 463–72.10.1016/j.ijfatigue.2007.04.016 ↗
21. R.W. Fonda, J.F. Bingert, and K.J. Colligan: Scripta Mater., 2004, vol. 51, pp. 243–48.10.1016/j.scriptamat.2004.04.017 ↗
22. V. Randle and O. Engler: Introduction to Texture Analysis, Macrotexture, Microtexture & Orientation Mapping, CRC Press, Boca Raton, FL, 2000.10.1201/9781482287479 ↗
23. Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 642–58.10.1007/s11661-007-9459-0 ↗
24. K. Masaki, Y.S. Sato, M. Maeda, and H. Kokawa: Scripta Mater., 2008, vol. 58, pp. 355–60.10.1016/j.scriptamat.2007.09.056 ↗
25. Joint Committee on Powder Diffraction Standards (JCPDS) No. 85-1327: Aluminum—International Centre for Diffraction Data, PCPDFWIN, version 2.02, 1999.
26. A. Arora, Z. Zhang, A. De, and T. DebRoy: Scripta Mater., 2009, vol. 61, pp. 863–66.10.1016/j.scriptamat.2009.07.015 ↗
27. P. Heurtier, C. Desrayaud, and F. Montheillet: Mater. Sci. Forum, 2002, vols. 396–402, pp. 1537–42.10.4028/www.scientific.net/MSF.396-402.1537 ↗
28. H. Schmidt and J. Hattel: Modell. Simul. Mater. Sci. Eng., 2005, vol. 13, pp. 77–93.10.1088/0965-0393/13/1/006 ↗
29. G. Buffa, J. Hua, R. Shivpuri, and L. Fratini: Mater. Sci. Eng. A, 2006, vol. 419, pp. 381–88.10.1016/j.msea.2005.09.041 ↗
30. G. Buffa, J. Hua, R. Shivpuri, and L. Fratini: Mater. Sci. Eng. A, 2006, vol. 419, pp. 389–96.10.1016/j.msea.2005.09.040 ↗
31. J.A. Schneider, A.C. Nunes, P.S. Chen, and G. Steele: J. Mater. Sci., 2005, vol. 40, pp. 4341–45.10.1007/s10853-005-2808-8 ↗
32. S. Ringer, B. Muddle, and I. Polmear: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1659–71.10.1007/BF02670753 ↗
33. A.K. Shukla and W.A. Baeslack: Scripta Mater., 2007, vol. 56, pp. 513–16.10.1016/j.scriptamat.2006.11.028 ↗
34. D.P. Field, T.W. Nelson, Y. Hovanski, and K.V. Jata: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2869–77.10.1007/s11661-001-1037-2 ↗
35. R.W. Fonda and K.E. Knipling: Sci. Technol. Weld. Join., 2011, vol. 16 (4), pp. 288–94.10.1179/1362171811Y.0000000010 ↗
36. S.H. Kang, W.H. Bang, J.H. Cho, H.N. Han, K.H. Oh, C.G. Lee, and S.J. Kim: Mater. Sci. Forum, 2005, vols. 495–497, p. 901.10.4028/www.scientific.net/MSF.495-497.901 ↗
37. H. Jin, S. Saimoto, M. Ball, and P.L. Threadgill: Mater. Sci. Technol., 2001, vol. 17, p. 1605.10.1179/026708301101509674 ↗
38. Y.S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, S. Jogan, and T. Hashimoto: Metall. Mater. Trans. A, 2011, vol. 32A, pp. 941–48.
39. A. Deschamps, F. De Geuser, B. Decreus, and B. Malard: 13th Int. Conf. on Aluminium Alloys (ICAA13), H. Weiland, A.D. Rollett, and W.A. Cassada, eds., TMS, Warrendale, PA, 2012, pp. 1145–54.10.1002/9781118495292.ch172 ↗
40. A. Kelly and R.B. Nicholson, eds.: Strengthening Methods in Crystals, Elsevier Materials Science Series, Great Yarmouth, Norfolk, England, 1971.
41. P. Upadhyay and A. Reynolds: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2091–2100.10.1007/s11661-013-2121-0 ↗