journal article·2008-04Open access

Study of New Multifunctional Shape Memory and Low Elastic Modulus Ni-Free Ti Alloys

M. Arciniegas, J.M. Manero, J. Peña, F.J. Gil, J.A. Planell

Abstract

Two new Ni-free Ti alloys, Ti-8.8Zr-19.1Nb and Ti-15.7Ta-19.0Nb, have been produced and studied in order to obtain shape memory and low elastic modulus materials for employment in the biomedical field. The new alloys were designed by means of a theoretical molecular orbitals method using nontoxic alloying elements. In the present study, the phases and mechanical properties obtained after solution treatment at 1100 °C by 1.5 hours following an ice-water quenching were characterized. Also, special attention on exploring the elastic modulus and shape memory properties via instrumented nanoindentation was given. The microstructural observation revealed β-grain in both alloys with an average size of 268 and 500 μm for Ti-15.7Ta-19.0Nb and Ti-8.8Zr-19.1Nb alloys, respectively. This latter presented also fine and disperse plates inside the grains. X-ray results confirmed the existence of β phase in both alloys and orthorhombic α″ phase on Ti-8.8Zr-19.1Nb alloy. A reversible phase transformation was detected by differential scanning calorimetry in the former alloy, which confirms the presence of shape memory effect. The elastic modulus of the new alloys was smaller than the commercial alloys employed as implant materials. Evidence of phase transformation was detected by nanoindentation, as hysteresis loops between unloading/reloading cycles on the P-h curves obtained at nanometer scale. These results suggest the possibility of using instrumented indentation for shape memory characterization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. T.W. Duering, A.R. Pelton: in Materials Properties Handbook Titanium Alloys, R. Boyer, G. Welsch, E.W. Collings, eds., ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 1035–48
2. T.W. Duering, K.N. Melton, and C.M. Wayman: Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann Ltd., London, 1990, pp. 3–10
3. K. Otsuka, X. Ren: Mater. Sci. Eng. A, 1999, vol. 273, pp. 89–10510.1016/S0921-5093(99)00291-9 ↗
4. M. Niinomi: Sci. Technol. Adv. Mater., 2003, vol. 4, pp. 445–5410.1016/j.stam.2003.09.002 ↗
5. M. Long, H.J. Rack: Biomaterials, 1998, vol. 19, pp. 1621–3910.1016/S0142-9612(97)00146-4 ↗
6. J. Peña, J.M. Guilemany, F.J. Gil: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1175–8110.1007/s11661-006-1095-6 ↗
7. J. Peña, J. Casals, F.J. Gil, J.A. Planell: J. Phys. IV France, 2003, vol. 112, pp. 1141–4510.1051/jp4:20031084 ↗
8. M. Niinomi: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 477–86
9. M. Niinomi: JOM., 1999, vol. 51, pp. 32–3410.1007/s11837-999-0091-x ↗
10. K. Wang: Mater. Sci. Eng. A, 1996, vol. 213, pp. 134–3710.1016/0921-5093(96)10243-4 ↗
11. A. Michiardi, C. Aparicio, J.A. Planell, F.J. Gil: J. Biomed. Mater. Res. Part B: Appl. Biomater., 2006, vol. 77B, pp. 249–5610.1002/jbm.b.30441 ↗
12. A. Baker: Met. Sci. J., 1971, vol. 5, pp. 92–10010.1179/030634571790439658 ↗
13. E. Takahashi, S. Watanabe, and S. Hanada: Int. Conf. on Shape Memory and Superelastic Technologies, Pacific Grove, CA, A.R. Pelton and T. Duering, eds., SMST Society Inc., OH, 2003, pp. 91–95
14. Y. Fukui, T. Inamura, H. Hosoda, K. Wakashima, S. Miyasaki: Mater. Trans., 2004, vol. 45, pp. 1077–8210.2320/matertrans.45.1077 ↗
15. Y.J. Hon, J.Y. Wang, R.R. Jeng, C.H. Yeh, Y.N. Pan: J. Taiwan Foundry Soc., 2004, vol. 30, pp. 33–40
16. K. Nitta, S. Watanabe, N. Masahashi, H. Hosada, S. Hanawa: in Structural Biomaterials for the 21st Century, M. Niinomi, T. Okabe, E.M. Taleff, D.R. Lesuer, H.F. Lippard, eds., TMS, Warrendale, PA, 2001, pp. 25–34
17. K. Kuroda, H. Hosoda, K. Wakashima, S. Miyazaki: Trans. Mater. Res. Soc. Jpn., 2003, vol. 28, pp. 631–34
18. J.-P. Noh, D.-W. Chung, H.-W. Lee, T.-H. Nam: Mater. Sci. Technol., 2001, vol. 17, pp. 1544–5010.1179/026708301101509809 ↗
19. T. Grosdidier, M.J. Philippe: Mater. Sci. Eng. A, 2000, vol. 291, pp. 218–2310.1016/S0921-5093(00)00921-7 ↗
20. J. Black and G. Hasting: Handbook of Biomaterials Properties, Chapman and Hall, London, 1998, pp. 167–9810.1007/978-1-4615-5801-9_15 ↗
21. ASM Handbook, vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, Joseph R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 3–15
22. E.W. Collings: in Materials Properties Handbook-Titanium Alloys, R. Boyer, G. Welsch, and E.W. Collings, eds., ASM INTERNATIONAL, Materials Park, OH, 1998, pp. 5–11
23. H.Y. Kim, Y. Ohmatsu, J.I. Kim, H. Hosoda, S. Miyazaki: Mater. Trans., 2004, vol. 45, pp. 1090–9510.2320/matertrans.45.1090 ↗
24. Y. Okasaki: Curr. Opin. Solid State Mater. Sci., 2001, vol. 5, pp. 45–5310.1016/S1359-0286(00)00025-5 ↗
25. T. Ozaki, H. Matsumoto, S. Watanabe, S. Hanada: Mater. Trans., 2004, vol. 45, pp. 2776–7910.2320/matertrans.45.2776 ↗
26. Y.H. Hon, J.Y. Wang, Y.N. Pan: Mater. Lett., 2004, vol. 58, pp. 3182–8610.1016/j.matlet.2004.06.009 ↗
27. N. Sakaguch, M. Niimori, T. Akahori: Mater. Trans., 2004, vol. 45, pp. 1113–1910.2320/matertrans.45.1113 ↗
28. G. Yang, T. Zhang: J. Alloys Compd., 2005, vol. 392, pp. 291–9410.1016/j.jallcom.2004.08.099 ↗
29. R. Mythili, V. Thomas, S. Saroja, M. Vijayalakshmi, and V.S. Raghunathan: Mater. Sci. Eng. A, 2004, pp. 1–13
30. Y.L. Hao, M. Niinomi, K. Fukunaga, Y.L. Zhou, R. Yang, A. Suzuki: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3137–4410.1007/s11661-002-0299-7 ↗
31. W.F. Ho, C.P. Ju, J.H. Chern Lin: Biomaterials, 1999, vol. 20, pp. 2115–2210.1016/S0142-9612(99)00114-3 ↗
32. R. Banerjee, S. Nag, J. Stechschulte, H.L. Fraser: Biomaterials, 2004, vol. 25, pp. 3413–1910.1016/j.biomaterials.2003.10.041 ↗
33. L.P. Khromova, N.B. Dyakonova, Y.L. Rodionov, G.V. Yudin, I. Korms: J. Phys. IV France, 2003, vol. 112, pp. 1051–5410.1051/jp4:20031062 ↗
34. S.J. Li, R. Yang, M. Niinomi, Y.L. Hao, Y.Y. Cui, Z.X. Guo: Mater. Sci. Technol., 2005, vol. 21, pp. 678–8610.1179/174328405X43108 ↗
35. M. Morinaga, M. Kato, T. Kamimura, M. Fukumoto, I. Harada, and K. Kubo: 6th World Conf. on Titanium, Cannes, France, 1988, P. Lacombe, R. Tricot, and G. Béranger, eds., Les Ulis Cedex, France, Proc.-Part III. pp. 1601–06
36. M. Morinaga and N. Yukawa: in Computer Aided Innovation of New Materials, M. Doyama, T. Suzuki, J. Kihara, and R. Yamamoto, eds., Elsevier Science Publisher B.V., North-Holland, 1991, pp. 803–08
37. M. Morinaga, M. Yoshinori, Y. Hisoshi: Mater. Sci. Forum, 2004, vol. 449, pp. 37–4210.4028/www.scientific.net/MSF.449-452.37 ↗
38. M. Niinomi, D. Kuroda, M. Morinaga, Y. Kato, Y. Toshiaki: Mater. Sci. Eng. A, 1998, vol. 243, pp. 244–4910.1016/S0921-5093(97)00808-3 ↗
39. T. Saito, T. Furuta, J.-H. Hwang, S. Kuramoto, K. Nishino, N. Suzuki, R. Chen, A. Kamada, K. Ito, Y. Seno, T. Nonaka, H. Ikehata, N. Nagasako, Ch. Iwamoto, Y. Ikuhara, and, T. Sakumu: Science, 2003, vol. 300, pp. 464–6710.1126/science.1081957 ↗
40. W. Ni and D.S. Grummon: Mater. Res. Soc. Symp. Proc., MRS Material Research Society, Warrendale, PA, 2002, vol. 697, pp. P2.9.1–P2.9.6
41. W. Ni, Y.-T. Cheng: Appl. Phys. Lett. 2002, vol. 80, pp. 3310–1210.1063/1.1476064 ↗
42. X.-G.K. Komvopoulos: J. Mater. Res., 2005, vol. 20 (7), pp. 1808–1310.1557/JMR.2005.0226 ↗
43. C.P. Frick, T.W. Lang, K. Spark, K. Gall: Acta Mater. 2006, vol. 54, pp. 2223–3410.1016/j.actamat.2006.01.030 ↗
44. V. Domnich, Y. Gogotsi: Rev. Adv. Mater. Sci., 2002, vol. 3, pp. 1–3610.1016/S1468-6996(01)00150-4 ↗
45. G.M. Pharr, W.C. Oliver, F.R. Brotzen: J. Mater. Res., 1992, vol. 7 (3), 1992, pp. 613–1710.1557/JMR.1992.0613 ↗
46. W.C. Oliver, G.M. Pharr: J. Mater. Res. 1992, vol. 7 (4), pp. 1564–8310.1557/JMR.1992.1564 ↗
47. Y. Okasaki, Y. Ito, K. Kyo, T. Tateisi: Mater. Sci. Eng. A, 1996, vol. 213, pp. 138–4710.1016/0921-5093(96)10247-1 ↗
48. X. Tang, T. Ahmed, H.J. Rack: J. Mater. Sci., 2000, vol. 35, pp. 1805–1110.1023/A:1004792922155 ↗
49. G. Welsh, R. Boyer, E.W. Collings: in Materials Properties Handbook-Titanium Alloys, R. Boyer, G. Welsch, and E.W. Collings, eds., ASM INTERNATIONAL, Materials Park, OH, 1998, pp. 1051–60
50. M. Niinomi: Biomaterials, 2004, vol. 24, pp. 2673–8310.1016/S0142-9612(03)00069-3 ↗
51. G.A. Shaw, D.S. Stone, A.D. Johnson, A.B. Ellis, W.C Crone: Appl. Phys. Lett., 2003, vol. 83, pp. 257–5910.1063/1.1591235 ↗
52. X.-G. Ma, K. Komvopoulos: Appl. Phys. Lett., 2003, vol. 83, pp. 3773–7510.1063/1.1623942 ↗
53. W. Ni, C. Yang-Tse: Appl. Phys. Lett., 2003, vol. 82, pp. 2811–1310.1063/1.1569984 ↗
54. Y. Horiuchi, K. Nakayama, T. Inamura, H.Y. Kim, K. Wakashima, S. Miyazaki, H. Hosoda: Mater. Trans., 2007, vol. 48 (3), pp. 414–2110.2320/matertrans.48.414 ↗
55. Y. Horiuchi, T. Inamura, H.Y. Kim, K. Wakashima, S. Miyazaki, H. Hosoda: Mater. Trans., 2007, vol. 48 (3), pp. 407–1310.2320/matertrans.48.407 ↗
56. K. Gall, K. Juntunen, H.J. Maier, H. Sehitoglu, Y.I. Chumlyakov: Acta Mater., 2001, vol. 49, pp. 3205–1710.1016/S1359-6454(01)00223-3 ↗
57. W.C. Oliver, G.M. Pharr: J. Mater. Res., 2004, vol. 19 (1), pp. 3–2010.1557/jmr.2004.19.1.3 ↗