journal article·2014-10Open access

On the Transition of Internal to External Selective Oxidation on CMnSi TRIP Steel

Lawrence Cho, Geun Su Jung, Bruno C. De Cooman

Abstract

The selective oxidation of a CMnSi transformation-induced plasticity (TRIP) steel during intercritical annealing (IA) in a N2 + 10 pct H2 gas atmosphere with a dew point (DP) in the range from 213 K to 278 K (−60 °C to +5 °C) was investigated by transmission electron microscopy. The decarburization during IA resulted in a fully ferritic matrix at the TRIP steel surface. Annealing in high DP gas atmospheres resulted in a reduction of the oxide layer thickness at the surface and an increase of the depth of the subsurface internal oxidation. The experimental results were compared to the calculations of the DP for the transition from internal to external oxidation based on the Wagner model. The evolution of the surface oxide composition during annealing was analyzed thermodynamically by means of the chemical potential diagram for the surface oxides. In the high DP atmosphere conditions, mainly, Mn-rich xMnO·SiO2 (1 < x < 2) oxides were formed at the surface, while Si-rich xMnO·SiO2 (x < 1) oxides were formed by internal oxidation. The use of a high DP gas atmosphere is therefore advantageous to induce internal selective oxidation and reduce the amount of surface oxides. It also leads to the formation of Mn-rich xMnO·SiO2 (1 < x < 2) oxides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. J. Mahieu, S. Claessens, B.C. De Cooman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2905–08.10.1007/s11661-001-1042-5 ↗
2. X.V. Eynde, J.P. Servais, M. Lamberigts: Surf. Interface Anal., 2003, vol. 35, pp. 1004–14.10.1002/sia.1639 ↗
3. J. Mahieu, S. Claessens, B.C. De Cooman, and F. Goodwin: The 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH 2004), Chicago, Illinois, 2004, Association for Iron and Steel Technology, pp. 529–38.
4. Y.F. Gong, H.S. Kim, B.C. De Cooman: ISIJ Int., 2008, vol. 48, pp. 1745–51.10.2355/isijinternational.48.1745 ↗
5. Y.F. Gong, H.S. Kim, B.C. De Cooman: ISIJ Int., 2009, vol. 49, pp. 557–63.10.2355/isijinternational.49.557 ↗
6. L. Cho, M.S. Kim, Y.H. Kim, S.J. Lee, and B.C. De Cooman: Proceedings of the 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH 2011), Genova, Italy, 2011, Associazione Italiana di Metallurgia, pp. 145–52.
7. X.S. Li, S.I. Baek, C.S. Oh, S.J. Kim, Y.W. Kim: Scripta Mater., 2007, vol. 57, pp. 113–16.10.1016/j.scriptamat.2007.03.040 ↗
8. A.R. Marder: Prog. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
9. B. Mintz: Int. Mater. Rev., 2001, vol. 46, pp. 169–97.10.1179/095066001771048754 ↗
10. L. Chen, H.S. Kim, S.K. Kim, B.C. De Cooman: ISIJ Int., 2007, vol. 47, pp. 1804–12.10.2355/isijinternational.47.1804 ↗
11. C.E. Jordan, K.M. Goggins, A.R. Marder: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2101–09.10.1007/BF02652311 ↗
12. I. Hertveldt, B.C. De Cooman, S. Claessens: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1225–32.10.1007/s11661-000-0118-y ↗
13. S. Feliu, M. Pérez-Revenga: Acta Mater., 2005, vol. 53, pp. 2857–66.10.1016/j.actamat.2005.03.003 ↗
14. M. Blumenau, M. Norden, F. Friedel, K. Peters: Steel Res. Int., 2010, vol. 81, pp. 1125–36.10.1002/srin.201000115 ↗
15. C. Wagner: Z. für Elektrochem. Ber. Bunsenges. Phys. Chem., 1959, vol. 63, pp. 772–82.
16. G. Böhm, M. Kahlweit: Acta Metall., 1964, vol. 12, pp. 641–48.10.1016/0001-6160(64)90036-7 ↗
17. R.A. Rapp: Corrosion, 1965, vol. 21, pp. 382–401.10.5006/0010-9312-21.12.382 ↗
18. Y. Niu, F. Gesmundo: Oxid. Met., 2006, vol. 65, pp. 329–55.10.1007/s11085-006-9022-1 ↗
19. D. Huin, P. Flauder, J.B. Leblond: Oxid. Met., 2005, vol. 64, pp. 131–67.10.1007/s11085-005-5718-x ↗
20. J.B. Brunac, D. Huin, J.B. Leblond: Oxid. Met., 2010, vol. 73, pp. 565–89.10.1007/s11085-010-9193-7 ↗
21. R. Rapp: Acta Metall., 1961, vol. 9, pp. 730–41.10.1016/0001-6160(61)90103-1 ↗
22. L. Cho, S. Lee, M. Kim, Y. Kim, B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 362–71.10.1007/s11661-012-1392-1 ↗
23. J. Takada, M. Adachi: J. Mater. Sci., 1986, vol. 21, pp. 2133–37.10.1007/BF00547959 ↗
24. H. Oikawa: Technology Reports, Tohoku University, 1983, vol. 48, pp. 7–77.
25. D.R. Lide: CRC Handbook of Chemistry and Physics, 86th ed., CRC Press, Boca Raton, 2005.
26. L. Cho, M.S. Kim, Y.H. Kim, B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5081–95.10.1007/s11661-013-1867-8 ↗
27. H. Liu, Y. He, L. Li: Appl. Surf. Sci., 2009, vol. 256, pp. 1399–1403.10.1016/j.apsusc.2009.08.095 ↗
28. H. Liu, Y. He, S. Swaminathan, M. Rohwerder, L. Li: Surf. Coat. Technol., 2011, vol. 206, pp. 1237–43.10.1016/j.surfcoat.2011.08.038 ↗
29. Y. Suzuki, T. Yamashita, Y. Sugimoto, S. Fujita, S. Yamaguchi: ISIJ Int., 2009, vol. 49, pp. 564–73.10.2355/isijinternational.49.564 ↗
30. N. Birks, G.H. Meier, and F.S. Pettit: Introduction to the High Temperature Oxidation of Metals, 2nd ed., Cambridge University Press, New York, 2006, pp. 114–15.10.1017/CBO9781139163903 ↗
31. J.M. Mataigne, M. Lamberigts, and V. Leroy: Developments in the Annealing of Sheet Steels, The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 1992, pp. 511–28.
32. F. Wang: Oxid. Met., 1997, vol. 48, pp. 215–24.10.1007/BF01670500 ↗
33. Z. Liu, W. Gao, K.L. Dahm, F. Wang: Acta Mater., 1998, vol. 46, pp. 1691–700.10.1016/S1359-6454(97)00346-7 ↗
34. S. Guan, W. Smeltzer: Oxid. Met., 1994, vol. 42, pp. 375–91.10.1007/BF01046756 ↗
35. J. Töpfer, R. Dieckmann: Solid State Ionics, 2010, vol. 181, pp. 479–88.10.1016/j.ssi.2010.02.004 ↗
36. I. Burn, S. Neirman: J. Mater. Sci., 1982, vol. 17, pp. 3510–24.10.1007/BF00752196 ↗