journal article·2012-12

An Ultra-low Carbon, Thermomechanically Controlled Processed Microalloyed Steel: Microstructure and Mechanical Properties

R. Shukla, S. K. Das, B. Ravi Kumar, S. K. Ghosh, S. Kundu, S. Chatterjee

Publisher page

Abstract

In the current study, a novel ultra-low carbon, high-molybdenum-bearing microalloyed steel has been thermomechanically processed. Transformation of this steel during continuous cooling has been assessed. Variation in the microstructure and mechanical properties at different finish rolling temperatures has been studied. The average grain size, misorientation of grain boundary, and distribution of ferrite grains have been analyzed by using electron backscatter diffraction. The lower yield strength (251 to 377 MPa) with moderate tensile strength (406 to 506 MPa) along with high ductility (30 to 47 pct) has been achieved in the selected range of finish rolling temperatures. Superior impact toughness value in the range of 153 to 162 J is obtained in the subsize specimen even at subzero temperatures (233 K [−40 °C]), which is attributed to fine average ferrite grain size. The acicular ferrite dominated microstructure obtained at the 1023 K (750 °C) finish rolling temperature is the most attractive microstructure for pipeline applications due to its excellent combination of strength and toughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. M. Cohen and W.S. Owen: Proc. Micro Alloying ’75, Washington, DC, 1975, pp. 2–8.
2. M.F. Mekkawy K.A. EI-Fawakhry, M.L. Mishreky, and M.M. Eissa: Scand. J. Metall., 1990, vol. 19, pp. 236–46.
3. S. Chatterjee and N.S. Mishra: Steel Res., 1994, vol. 65, pp. 138–45.10.1002/srin.199400943 ↗
4. A.J. DeArdo: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 946–54.10.2355/isijinternational.35.946 ↗
5. A. Ghosh, S. Das, S. Chatterjee, B. Mishra, and P. Ramachandrarao: Mater. Sci. Eng. A, 2003, vol. A348, pp. 299–308.10.1016/S0921-5093(02)00735-9 ↗
6. M.G. Vassilaros and E.J. Czyryca: Key Eng. Mater., 1993, vols. 84–85, pp. 587–601.10.4028/www.scientific.net/KEM.84-85.587 ↗
7. H.J. Leber, C.I. Garcia, E.J. Falmiere, and A.J. DeArdo: Proc. Int. Symp. on Processing, Microstructure and Properties of HSLA Steel, A.J. DeArdo, ed., TMS, Warrendale, PA, 1988, pp. 425–33.
8. E.J. Czyryca: Key Eng. Mater., 1993, vols. 84–85, pp. 491–20.10.4028/www.scientific.net/KEM.84-85.491 ↗
9. C.I. Garcia, M. Mujahid, and A.J. DeArdo: Proc. Int. Sym. on High Performance Applications, Cleveland, OH, 1995, pp.135–40.
10. F.J. Humphreys: J. Mater. Sci., 2001, vol. 36, pp. 3833–54.10.1023/A:1017973432592 ↗
11. V. Randle: Microtexture Determination and its Applications, 2nd ed., Institute of Materials/Maney, London, U.K., 2003.
12. H. Kitahara, R. Ueji, M. Ueda, N. Tsuji, and Y. Minanimo: Mater. Charact., 2005, vol. 54, pp. 378–86.10.1016/j.matchar.2004.12.015 ↗
13. M. Miller: Image J Software, http://rsb.info.nih.gov/ij.
14. Y. Ito and K. Bessyo: A Prediction of Welding Procedure to Avoid Heat Affected Zone Cracking, 1969, IIW Doc. IX, p. 631–69.
15. F. Boratto, R. Barbosa, S. Yue, and J.J. Jonas: THERMEC-88, Proc. Iron and Steel Institute of Japan, Tokyo, Japan, 1988, pp. 383–90.
16. H.K.D.H. Bhadeshia: Bainite in Steels, 2nd ed., Institute of Materials, London, U.K., 2001, pp. 277–79.
17. N.J. Kim: J. Met., 1983, vol. 35, pp. 21–27.
18. M.-C. Zhao, Ke Yang, F.-R. Xiao, and Y.-Y. Shan: Mater. Sci. Eng. A, 2003, vol. A355, pp. 126–36.10.1016/S0921-5093(03)00074-1 ↗
19. M. Díaz-Fuentes and I. Gutiérrez: Mater Sci. Eng. A, 2003, vol. A363, pp. 316–24.10.1016/S0921-5093(03)00665-8 ↗
20. O. Grong and D.K. Matlock: Int. Met. Rev., 1986, vol. 31, pp. 27–48.10.1179/095066086790324186 ↗
21. J.L. Lee, M.H. Hon, and G.H. Cheng: J. Mater. Sci., 1987, vol. 22, pp. 2767–77.10.1007/BF01086469 ↗
22. K. Sekido, T. Ohmura, L. Zhang, T. Hara, and K. Tsuzaki: Mater. Sci. Eng. A, 2011, vol. A530, pp. 396–401.10.1016/j.msea.2011.09.102 ↗
23. F.H. Samuel, S. Yue, J.J. Jonas, and K.R. Barnes: Iron Steel Inst. Jpn. Int., 1990, vol. 30, pp. 216–25.10.2355/isijinternational.30.216 ↗
24. D.M. Saylor, B.S. El Dasher, A.D. Rollett, and G.S. Rohrer: Acta Mater., 2004, vol. 52, pp. 3469–55.10.1016/j.actamat.2004.04.018 ↗
25. M.-C. Zhao, T. Hanamura, H. Qiu, and K. Yang: Mater. Sci. Eng. A, 2005, vol. A395, pp. 327–32.10.1016/j.msea.2004.12.041 ↗
26. S.Y. Shin, B. Hwang, S. Lee, N.J. Kim, and S.S. Ahn: Mater. Sci. Eng. A, 2007, vol. A458, pp. 281–89.10.1016/j.msea.2006.12.097 ↗
27. A. Guo, R.D.K. Misra, J. Xu, B. Guo, and S.G. Jansto: Mater. Sci. Eng. A, 2010, vol. A527, pp. 3886–92.10.1016/j.msea.2010.02.067 ↗
28. X.P. Shen and R. Priestner: Metall. Trans. A, 1990, vol. 21A, pp. 2547–53.10.1007/BF02647000 ↗
29. J. Adamczyk: J. Achieve. Mater. Manufact. Eng., 2006, vol. 14, pp. 9–20.
30. M. Prikryl, A. Kroupa, G.C. Weatherly, and S.V. Subramanian: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1149–65.10.1007/BF02649854 ↗
31. K.J. Irvine, F.B. Pickering, and T. Gladman: J. Iron Steel Inst., 1967, vol. 205, pp. 161–82.
32. T. Gladman, D. Dulien, and D.I. McIvoy: Proc. Microalloying ’75, Union Carbide Corporation, New York, NY, 1977, pp. 32–58.
33. A. Ghosh, B. Mishra, S. Das, and S. Chatterjee: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 703–13.10.1007/s11661-005-1002-6 ↗
34. T. Gladman: The Physical Metallurgy of Microalloyed Steel, Institute of Materials, London, U.K., 1997, pp. 47–235.
35. P.G. Xu, Y. Tomota, P. Lukáš, O. Muránsky, and Y. Adachi: Mater. Sci. Eng. A, 2006, vols. A435–A436, pp. 46–53.10.1016/j.msea.2006.06.002 ↗
36. S.C. Hong, S.H. Lim, H.S. Hong, K.J. Lee, D.H. Shin, and K.S. Lee: Mater. Sci. Eng. A, 2003, vol. A335, pp. 241–48.
37. E.J. Czyryca: Key Eng. Mater., 1993, vols. 84–85, pp. 491–20.10.4028/www.scientific.net/KEM.84-85.491 ↗
38. A. Guo, R.D.K. Misra, J. Liu, L. Chen, X. He, and S.G. Jansto: Mater. Sci. Eng. A, 2010, vol. A527, pp. 6440–48.10.1016/j.msea.2010.06.092 ↗
39. K.P. Mingard, R. Roebuck, E.G. Bennett, M.G. Gee, H. Nordenstrom, G. Sweetman, and P. Chan: Int. J. Refract. Met. Hard Mater., 2009, vol. 27, pp. 213–23.10.1016/j.ijrmhm.2008.06.009 ↗
40. A. Cracknell and N.J. Petch: Acta Metall., 1955, vol. 3, pp.186–89.10.1016/0001-6160(55)90090-0 ↗
41. F.B. Pickering and T. Gladman: Metallurgical Developments in Carbon Steels, ISI Spec. Rep. No. 81, Iron and Steel Inst., London, U.K., 1963.
42. W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 5–36.10.1007/BF02680580 ↗
43. W.B. Morrison and J.A. Chapman: Proc. Rosenhain Centenary Conf., vols. 286–303, The Royal Society, London, U.K., 1976.
44. Y. Li, J.A. Wilson, A.J. Craven, P.S. Mitchell, D.N. Crowther, and T.N. Baker: Mater. Sci. Technol., 2007, vol. 23, pp. 509–18.10.1179/174328407X166687 ↗
45. B.C. DeCooman, J.G. Speer, I.Y. Pyshmintsev, and N. Yoshinaga: Materials Design—The Key to Modern Steel Products, GRIPS Media GmbH, Bad Harzburg, Germany, 2007, pp. 259–62.
46. C.P. Reip, S. Shanmugam, and R.D.K. Misra: Mater. Sci. Eng. A, 2006, vol. A424, pp. 307–17.10.1016/j.msea.2006.03.026 ↗
47. B. Eghbali and A. Abdollah-Zadeh: Scripta Mater., 2005, vol. 53, pp. 41–45.10.1016/j.scriptamat.2005.03.014 ↗