Thermal-imaging technologies for detecting damage during high-cycle fatigue
Source abstract
Abstract
A high-speed and high-sensitivity thermographic-infrared (IR) imaging system has been used for nondestructive evaluation of specimen-temperature evolutions during high-cycle fatigue experiments. The relationship among the temperature, stress-strain state, and fatigue behavior is discussed. Both thermodynamics and heat-transfer theories are applied to model and quantify the observed temperature variations during fatigue. The predicted and measured temperature evolutions and inelastic strains during fatigue were found to be in good agreement. During fatigue experiments, in-situ observations as well as qualitative and quantitative analyses of Luders-band evolutions, crack propagation, plastic zones, and final fracture have been performed by thermography, which can open up wide applications of thermography in detecting the in-situ heat-related processes, including mechanical damages and phase transformations, of materials and structural components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermography and Photoacoustic Techniques · Fire effects on concrete materials · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. L. Margulies, G. Winther, and H.F. Poulsen: Science, 2001, vol. 291, pp. 2392–94.10.1126/science.1057956 ↗
2. B.C. Larson, W. Yang, G.E. Ice, J.D. Budai, and J.Z. Tischler: Nature, 2002, vol. 415, pp. 887–90.10.1038/415887a ↗
3. Y.D. Wang, H. Tian, A.D. Stoica, X. Wang, P.K. Liaw, and J.W. Richardson: Nature Mater., 2003, Feb., pp. 101–06, http://www.nature.com/cgi-taf/DynaPage.taf?file=/nmat/journal/v2/n2-full/ nmat812.html10.1038/nmat812 ↗
4. L. Jiang, M. Huang, C.R. Brooks, and P.K. Liaw: in Nondestructive Evaluation (NDE) and Materials Properties IV, P.K. Liaw, R.J. Arsenault, R.E. Green, Jr., K.L. Murty, and R.B. Thompson, eds., TMS, Warrendale, PA, 1999, pp. 43–60.
5. M.E. Fine, Z.M. Connor, and J.D. Achenbach: in Nondestructive Evaluation (NDE) and Materials Properties IV, P.K. Liaw, R.J. Arsenault, R.E. Green, Jr., K.L. Murty, and R.B. Thompson, eds., TMS, Warrendale, PA, 1999, pp. 1–9.
6. G. Birnbaum and G. Free: Eddy-Current Characterization of Materials and Structures: a Symposium/Sponsored by ASTM Committee E-7 on Nondestructive Testing, Gaithersburg, MD, Sept. 5–7, 1979, ASTM, Philadelphia, PA, 1979.
7. A.A Moss and H.I Goldberg: Computed Tomography, Ultrasound and X-ray: an Integrated Approach, Masson Publication, New York, 1979.
8. L. Jiang, P.K. Liaw, C.R. Brooks, B. Somieski, and D.L. Klarstrom: Mater. Sci. Eng. A, 2001, vol. 313 (1–2), pp. 153–59.10.1016/S0921-5093(01)00935-2 ↗
9. H. Jeong, D.K. Hsu, and P.K. Liaw: Compos. Sci. Technol., 1998, vol. 58 (1), pp. 65–76.10.1016/S0266-3538(97)00093-6 ↗
10. P.K. Liaw, D.K. Hsu, N. Yu, N. Miriyala, and H. Jeong: Acta Mater., 1996, vol. 44 (5), pp. 2101–13.10.1016/1359-6454(95)00324-X ↗
11. R. Pitchumany, P.K. Liaw, S.C. Yao, D.K. Hus, and H. Jeong: Acta Metall. Mater., 1995, vol. 43 (8), pp. 3045–59.10.1016/0956-7151(95)00021-M ↗
12. H. Jeong, D.K. Hsu, R.E. Shannon, and P.K. Liaw: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 799–809.10.1007/BF02665456 ↗
13. L. Chaerle, W.V. Caeneghem, E. Messens, H. Lambers, M.V. Montagu, and D.V.D. Straeten: Nature Biotechnol., 1999, vol. 17, pp. 813–16.10.1038/11765 ↗
14. B.M. Gratt and M. Anbar: Dentomaxillofacial Radiology, 1998, vol. 27, pp. 68–74.10.1038/sj.dmfr.4600324 ↗
15. S.J. Taylor and J.P. Morken: Science, 1998, vol. 280, pp. 267–70.10.1126/science.280.5361.267 ↗
16. H. Ay, J. Jang, and J.N. Yeh: Int. J. Heat Mass Transfer, 2002, vol. 45 (20), pp. 4069–78.10.1016/S0017-9310(02)00132-1 ↗
17. W. Bai and B.S. Wong: Measurement Sci. Technol., 2002, vol. 13 (5), pp. 700–05.10.1088/0957-0233/13/5/307 ↗
18. B. Marwaha and D. Luss: AIChE J., 2002, vol. 48 (3), pp. 617–24.10.1002/aic.690480318 ↗
19. G.I. Taylor and H. Quinney: Proc. R. Soc. A, 1934, vol. 143, pp. 307–26.
20. J.R. Rice and N. Levy: The Physics of Strength and Plasticity, A.S. Argon, ed., MIT Press, Cambridge, MA, 1969, pp. 277–92.
21. D.T. Lohr, N.F. Enke, and B.I. Sandor: in Dynamic Failure: Proc. 1987 SEM Fall Conf., Savannah, GA, October 25–27, 1987, Society for Experimental Mechanics, Brookfield Center, CT, 1987, pp. 169–74.
22. P.K. Liaw, H. Wang, L. Jiang, B. Yang, J.Y. Huang, R.C. Kuo, and J.G. Huang: Scripta Mater., 2000, vol. 42, pp. 389–95.10.1016/S1359-6462(99)00358-9 ↗
23. P.R. Guduru, A.T. Zehnder, A.J. Rosakis, and G. Ravichandran: Eng. Fracture Mech., 2001, vol. 68, pp. 1535–56.10.1016/S0013-7944(01)00045-5 ↗
24. P.R. Guduru, A.J. Rosakis, and G. Ravichandran: Mech. Mater., 2001, vol. 33, pp. 371–402.10.1016/S0167-6636(01)00051-5 ↗
25. M.P. Luong: Mech. Mater., 1998, vol. 28, pp. 155–63.10.1016/S0167-6636(97)00047-1 ↗
26. Y. Yokoyama, H. Inoue, K. Fukaura, and A. Inoue: Mater. Trans., 2002, vol. 43 (3), pp. 575–79.10.2320/matertrans.43.575 ↗
27. Y. Yokoyama, A. Kobayashi, K. Fukaura, and A. Inoue: Mater. Trans., 2002, vol. 43 (3), pp. 571–74.10.2320/matertrans.43.571 ↗
28. W.H. Peter, P.K. Liaw, R.A. Buchanan, C.T. Liu, C.R. Brooks, J.A. Horton, C.A. Carmichael, and J.L. Wright: Intermetallics, 2002, vol. 10 (11–12), pp. 1125–29.10.1016/S0966-9795(02)00152-8 ↗
29. W.H. Peter, R.A. Buchanan, C.T. Liu, P.K. Liaw, M.L. Morrison, J.A. Horton, C.A. Carmichael, and J.L. Wright: Intermetallics, 2002, vol. 10 (11–12), pp. 1157–62.10.1016/S0966-9795(02)00130-9 ↗
30. W.H. Peter, R.A. Buchanan, C.T. Liu, and P.K. Liaw: J. Non-Crystalline Solids, 2003, vol. 317 (1–2), pp. 187–92.10.1016/S0022-3093(02)02009-4 ↗
31. P.K. Liaw, A. Saxena, and J. Perrin: Eng. Fract Mech., 1993, vol. 45 (6), pp. 759–86.10.1016/0013-7944(93)90064-Y ↗
32. P.K. Liaw, M.G. Peck, G.E. Rudd, and T.K. Lai: Eng. Fract. Mech., 1992, vol. 43 (3), pp. 379–400.10.1016/0013-7944(92)90108-Q ↗
33. W.A. Logsdon, P.K. Liaw, and M.A. Burke: Eng. Fract. Mech., 1990, vol. 36 (2), pp. 183–218.10.1016/0013-7944(90)90001-W ↗
34. P.K. Liaw, W.A. Logsdon, and J.A. Begley: Metall. Trans. A, 1989, vol. 20A, pp. 2069–085.10.1007/BF02650293 ↗
35. P.K. Liaw, W.A. Logsdon, and M.A. Burke: Scripta Metall., 1989, vol. 23 (5), pp. 747–52.10.1016/0036-9748(89)90524-3 ↗
36. M.A. Biot: J. Appl. Phys., 1956, vol. 27 (3), pp. 240–53.10.1063/1.1722351 ↗
37. R. Rocca and M.B. Bever: Trans. Am. Inst. Mech. Eng., 1950, vol. 188, pp. 327–33.
38. B. Yang, P.K. Liaw, H. Wang, L. Jiang, J.Y. Huang, R.C. Kuo, and J.G. Huang: Mater. Sci. Eng., 2001, vol. A314, pp. 131–39.10.1016/S0921-5093(00)01910-9 ↗
39. O.W. Dillon: J. Mech. Phys. Solids, 1963, vol. 11, pp. 21–23.10.1016/0022-5096(63)90004-8 ↗
40. S.R. Bodner, I. Partom, and Y. Partom: J. Appl. Mech., 1979, vol. 46, pp. 805–10.10.1115/1.3424658 ↗
41. P.K. Liaw, B. Yang, H. Tian, L. Jiang, H. Wang, J.Y. Huang, R.C. Kuo, J.G. Huang, D. Fielden, J.P. Strizak, and L.K. Mansur: Fatigue and Fracture Mechanics: 33rd Volume, ASTM STP 1417, W.G. Reuter and R.S. Piascik, eds., ASTM International, West Conshohocken, PA, 2002, pp. 524–56.
42. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2279–96.10.1007/s11661-001-0203-x ↗
43. H. Wang, L. Jiang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1307–10.10.1007/s11661-000-0126-y ↗
44. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Trans. Nonferrous Met. Soc. China, 2002, vol. 12, pp. 734–47.
45. H. Wang, L. Jiang, Y.H. He, L.J. Chen, P.K. Liaw, R.R. Seeley, and D.L. Klarstrom: Metall. Trans. A, 2002, vol. 33A, pp. 1287–92.10.1007/s11661-002-0231-1 ↗
46. L.J Chen, P.K. Liaw, H. Wang, Y.H. He, R.L. McDaniels, L. Jiang, B. Yang, and D.L. Klarstrom: Mechanics of Materials, 36, 2004, pp. 85–98.10.1016/S0167-6636(03)00033-4 ↗
47. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, L. Chen, and D.L. Klarstrom: Metallurgical and Materials Transactions A, in press.
48. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Mechanics of Materials, 36, 2004, pp. 73–84.10.1016/S0167-6636(03)00032-2 ↗
49. B. Yang: Journal of Materials Engineering and Performance, 12 (3), 2003, pp. 345–53.10.1361/105994903770343213 ↗
50. C.T. Liu, L. Heatherly, D.S. Easton, C.A. Carmichael, J.H. Schneibel, C.H. Chen, J.L. Wright, M.H. Yoo, J.A. Horton, and A. Inoue: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1811–20.10.1007/s11661-998-0004-6 ↗
51. P.K. Liaw, G.Y. Wang, W.H. Peter, B. Yang, Y. Yokoyama, M.L. Benson, B.A. Green, M.J. Kirkham, S.A. White, T.A. Saleh, R.L. McDaniels, R.V. Steward, R.A. Buchanan, C.T. Liu, and C.R. Brooks: 2003 Annual TMS Meeting, Dr. C.T. Liu Symp., San Diego, CA, March 2–6, 2003, unpublished research.