journal article·2007-03

Quasi-Plastic Deformation of WC-Co Composites Loaded with a Spherical Indenter

Haibo Zhang, Zhigang Zak Fang, J. Daniel Belnap

Publisher page

Abstract

The quasi-plastic deformation behavior of cemented tungsten carbide (WC-Co) materials was studied using Hertzian indentation techniques. The indentation stress-strain curves of three WC-10 wt pct Co alloys with different hardness values demonstrate that WC-Co alloys exhibit “quasi-plasticity” behavior under indentation load and the increase of indentation stress vs indentation strain bears similarity to “strain hardening” in ductile metals. The analysis of the subsurface indentation damage shows that the mechanisms of the quasi-plastic deformation of WC-Co material are the formation of microcracks. Microcracks were found at heavily damaged areas in all three alloys, and the number of microcracks was higher for the sample with the higher apparent quasi-plasticity. The threshold stress values for the onset of quasi-plastic deformation and formation of ring cracks were determined and used to evaluate the brittleness index of these materials. The correlation of the brittleness index with hardness values gives insight with regard to the brittle or quasi-plastic responses of WC-Co materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Tunneling and Rock Mechanics · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. B. Roebuck, E.A. Almond: Int. Mater. Res., 1988, vol. 33 (2), pp. 90–110
2. B. Roebuck: J. Mater. Sci., 1979, vol. 14, pp. 2837–4410.1007/BF00611463 ↗
3. H.E. Exner, J. Gurland: Powder Metall., 1970, vol. 13 (25), pp. 13–3010.1179/pom.1970.13.25.002 ↗
4. L.S. Sigl, H.E. Exner: Metall. Trans. A, 1987, vol. 18A, pp. 1299–130810.1007/BF02647199 ↗
5. L.S. Sigl, H.F. Fischmeister: Acta Metall., 1988, vol. 36 (4), pp. 887–97.10.1016/0001-6160(88)90143-5 ↗
6. Gopal S. Upadhyaya: Cemented Tungsten Carbides Production, Properties, and Testing, Noyes Publications, New Jersey, USA, 199810.1016/B978-081551417-6.50019-8 ↗
7. J. Gurland, P. Bradzil: Trans. TMS-AIME, 1955, vol. 203, pp. 311–15
8. H. Unckel: Z. Metallkd., 1963, vol. 54, pp. 525–38
9. H. Doi, Y. Fujiwara, K. Miyake: Trans. TMS-AIME, 1969, vol. 245, pp. 1457–70
10. H. Fischmeister, H.E. Exner: Arch. Eisen., 1966, vol. 37, pp. 499–510
11. B. R. Lawn, T.R. Wilshaw: J. Mater. Sci., 1975, vol. 10 (6), pp. 1049–8110.1007/BF00823224 ↗
12. D. Tabor: Hardness of Metals, Clarendon, Oxford, United Kingdom, 1951.
13. B.R. Lawn: J. Am. Ceram. Soc., 1998, vol. 81 (8), pp. 1977–9410.1111/j.1151-2916.1998.tb02580.x ↗
14. H. Chai, B.R. Lawn: Acta Mater., 2002, vol. 50, pp. 2613–2510.1016/S1359-6454(02)00091-5 ↗
15. Y. Deng, B.R. Lawn, Isabel K. Lioyd: J. Biomed. Mater. Res. (Appl. Biomater.), 2002, vol. 63, pp. 137–4510.1002/jbm.10091 ↗
16. B.R. Lawn, Fracture of Brittle Solids, Cambridge University Press, Cambridge, United Kingdom, 199310.1017/CBO9780511623127 ↗
17. F. Guiberteau, N.P. Padture, H. Cai, B.R. Lawn: Phil. Mag. A, 1993, vol. 68 (5), pp. 1003–16.10.1080/01418619308219382 ↗
18. B.R. Lawn, N.P. Padture, H. Cai, F. Guiberteau: Science, 1994, vol. 263, pp. 1114–1610.1126/science.263.5150.1114 ↗
19. F. Guiberteau, N.P. Padture, B.R. Lawn: J. Am. Ceram. Soc., 1994, vol. 77, pp. 1825–3110.1111/j.1151-2916.1994.tb07057.x ↗
20. H. Cai, M.A. Stevens Kalceff, B.R. Lawn: J. Mater. Res., 1994, vol. 9, pp. 762–7010.1557/JMR.1994.0762 ↗
21. H.H.K. Xu, L. Wei, N.P. Padture, B.R. Lawn, R.L. Yeckley: J. Mater. Sci., 1995, vol. 30, pp. 869–7810.1007/BF01178419 ↗
22. B.R. Lawn, Seung Kun Lee, Irene M. Peterson, Sataporn Wuttiphan: J. Am. Ceram. Soc., 1998, vol. 81 (6), pp. 1509–2010.1111/j.1151-2916.1998.tb02510.x ↗
23. It Meng Low, Seung Kun Lee, B.R. Lawn: J. Am. Ceram. Soc., 1998, vol. 81 (1), pp. 225–2810.1111/j.1151-2916.1998.tb02320.x ↗
24. R.K. Viswanadham and J.D. Venables: Metall. Trans. A, 1977, vol. 8A, pp.187–9110.1007/BF02677280 ↗
25. D. Han, J.J. Mecholsky: J. Mater. Sci., 1990, vol. 25, pp. 4949–5610.1007/BF00580112 ↗
26. Z. Fang, J. W. Eason: Int. J. Powder Metall., 1993, vol. 29 (3), pp. 259–65
27. Data from RTW (Rogers Tool Works) Inc. and MegaDiamond, Smith Tool Inc
28. K.L. Johnson: Contact Mechanics, Cambridge University Press, Cambridge, United Kingdom, 198510.1017/CBO9781139171731 ↗
29. A.C. Fischer-Cripps, B.R. Lawn: Acta Mater. 1996, vol. 44 (2), pp. 519–2710.1016/1359-6454(95)00204-9 ↗
30. H. Cai, M.S. Kalceff, B.R. Lawn: J. Mater. Res., 1994, vol. 9 (3), pp. 762–7010.1557/JMR.1994.0762 ↗
31. J.A. Greenwood, J.H. Tripp: J. Appl. Mech. (Trans. ASME, Ser. E), 1967, vol. 34, pp. 153–5910.1115/1.3607616 ↗
32. A.W. Momber: Int. J. Fract., 2004, vol. 125, pp. 263–7910.1023/B:FRAC.0000022240.64448.2f ↗
33. A.C. Fischer-Cripps, B.R. Lawn: J. Am. Ceram. Soc., 1996, vol. 79 (10), pp. 2609–1810.1111/j.1151-2916.1996.tb09023.x ↗
34. A.C. Fischer-Cripps: J. Mater. Sci., 1997, vol. 32, pp. 727–3610.1023/A:1018552222072 ↗
35. Young-Woo Rhee, Hae-Won Kim, Yan Deng, B.R. Lawn: J. Am. Ceram. Soc., 2001, vol. 84 (5), pp. 1066–7210.1111/j.1151-2916.2001.tb00791.x ↗
36. F.C. Frank, B.R. Lawn: Proc. R. Soc. London, 1947, vol. A299 (1458), pp. 291–306
37. Z.Z. Fang: Int. J. Refractory Met. Hard Mater., 2005, vol. 23, pp. 119–2710.1016/j.ijrmhm.2004.11.005 ↗