Microstructural characterization of a modified 706-type Ni-Fe superalloy by small-angle neutron scattering and electron microscopy
Source abstract
Abstract
The new Ni-Fe-based superalloy DT706, derived from INCONEL 706, is the object of studies for potential uses in turbine-disk applications at temperatures above 973 K. This alloy aims at improving the microstructural stability while preserving the excellent machinability and good mechanical properties of the base material. This article is the first of a two-part study concentrating on the characterization of the microstructure of the DT706 precipitates, depending on the heat-treatment conditions. Analyses were performed by means of ex-situ small-angle neutron scattering (SANS) measurements, together with conventional scanning electron microscopy (SEM) and transmission electron microscopy (TEM) microscopy, on experimentally-heat-treated samples. The results, when compared to a similar analysis previously made on INCONEL 706, showed that the precipitation characteristics of DT706 reflect compositional changes, but are still remarkably dependent on the cooling stages between the different heat-treatment steps.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. J. Rösler, M. Götting, D. Del Genovese, B. Böttger, R. Kopp, M. Wolske, F. Schubert, H.-J. Penkalla, T. Seliga, A. Thoma, A. Scholz, and C. Berger: Adv. Eng. Mater., 2003, vol. 5 (7), pp. 469–83.10.1002/adem.200310083 ↗
2. J. Rösler, B. Böttger, M. Wsolske, H.J. Penkalla, and C. Berger: Materials for Advanced Power Engineering, J. Lecomte-Beckers, M. Carton, F. Schubert, and P.J. Ennis, eds., Forschungszentrum Jülich, Jülich, Germany, 2002, pp. 89–106.
3. “INCONEL 706,” Technical Brochure, Huntington Alloys Inc., Huntington WV, 1974, p. 3.
4. P.W. Schilke and R.C. Schwant: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 25–34.10.7449/2001/Superalloys_2001_25_34 ↗
5. R. Cozar and A. Pineau: Metall. Trans., 1973, vol. 4, pp. 47–59.10.1007/BF02649604 ↗
6. J. Rösler, S. Müller, D. Del Genovese, and M. Götting: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 523–34.10.7449/2001/Superalloys_2001_523_534 ↗
7. C.T. Sims, N.S. Stoloff, and W.C. Hagel: Superalloys II, Chester Thomas, C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds., Wiley Interscience Publication, New York, NY, 1987, pp. 178–80.
8. H.J. Penkalla, J. Wosik, W. Fischer, and F. Schubert: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 279–90.10.7449/2001/Superalloys_2001_279_290 ↗
9. M. Durand-Charre: The Microstructure of Superalloys, Gordon and Breach Science Publishers, Amsterdam, The Netherlands, 1997, p. 47.
10. G. Härkegård, W. Ballach, K. Stärk, and J. Rösler: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1997, pp. 425–30.10.7449/1997/Superalloys_1997_425_430 ↗
11. S. Müller and J. Rösler: Life Assessment of Hot Section Gas Turbine Components, R. Townsend, M. Winstone, M. Henderson, J.R. Nichols, A. Partridge, B. Nath, M. Wood, and R. Viswanathan, eds., Cambridge University Press, Cambridge, United Kingdom, 1999, pp. 49–60.
12. S. Müller and J. Rösler: Steels and Materials for Power Plants, P. Neumann, D. Allen, and E. Tenckhoff, eds., Wiley-VCH-Verlag, Gmbh, Weinheim, Germany, 2000, pp. 352–58.10.1002/3527606181.ch61 ↗
13. E. Andrieu, N. Wang, R. Molins, and A. Pineau: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 695–710.10.7449/1994/Superalloys_1994_695_710 ↗
14. C.T. Sims, N.S. Stoloff, and W.C. Hagel: Superalloys II, Chester Thomas, C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds., Wiley Interscience Publication, New York, NY, 1987, p. 170.
15. S. Mannan, S. Patel, and J. deBarbadillo: Superalloys 2000, K.A. Green, T.M. Pollock, R.D. Kissinger, and R.R. Bowmann, eds., TMS, Warrendale, PA, 2000, pp. 449–58.
16. X. Xie, Q. Liang, J. Dong, W. Meng, Z. Xu, M. Chan, F. Wang, E. Andrieu, and A. Pineau: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 711–20.10.7449/1994/Superalloys_1994_711_720 ↗
17. D. Mukherji, P. Strunz, D. Del Genovese, R. Gilles, J. Rösler, and A. Wiedenmann: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2781–92.10.1007/s11661-003-0179-9 ↗
18. D. Del Genovese, P. Strunz, D. Mukherji, R. Gilles, and J. Rösler: IFW, Technical University of Braunschweig, 2004–2005, unpublished research.
19. T. Shibata, T. Takahashi, Y. Shudo, M. Kusuhashi, J. Taira, and T. Ishiguro: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1997, pp. 379–88.10.7449/1997/Superalloys_1997_379_388 ↗
20. Petzow Günter: Metallographisches, Keramographisches, Plastographisches Ätzen, 6th ed., Gebrüder Bornträger, ed., Berlin, 1994, p. 241.
21. Leszek Wojmar: Image Analysis: Applications in Material Engineering, CRC Press LLC, Boca Raton, FL, 1998, pp. 123–28.
22. P. Strunz, K. Mortensen, and S. Janssen: Physica B, 2004, vol. 350, p. e783.10.1016/j.physb.2004.03.204 ↗
23. P. Strunz, R. Gilles, D. Mukherji, and A. Wiedenmann: J. Appl. Cryst., 2003, vol. 36, pp. 854–59.10.1107/S0021889803001705 ↗
24. G. Kostorz: Neutron Scattering, G. Kostorz, ed., Academic Press, New York, NY, 1979, pp. 227–89.10.1016/B978-0-12-341815-9.50013-6 ↗
25. N. Saunders, M. Fahrmann, and C.J. Small: Superalloys 2000, K.A. Green, R.D. Kissinger, T.M. Pollock, and R.R. Bowmann, eds., TMS, Warrendale, PA, 2000, pp. 803–11.
26. D.F. Paulonis, J.M. Oblak, and D.S. Duvall: Trans. ASM, 1969, vol. 62, pp. 611–22.
27. E. Andrieu, R. Cozar, and A. Pineau: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 241–56.