journal article·2007-03

Modeling the Age-Hardening Behavior of SiC/Al Metal Matrix Composites

MIN SONG, XIA LI, KANG H. CHEN

Publisher page

Abstract

A model for the age-hardening behavior of SiC/Al metal matrix composites has been developed to describe the variation of the yield strength with aging time. The model incorporates the heterogeneous nucleation and growth of the precipitates along the dislocations to describe the accelerated aging behavior. It has been shown that the size and volume fraction of the SiC particles as well as aging temperature influence the age-hardening behavior. Increasing the aging temperature accelerates the aging process by increasing the velocities of the total nucleation rate (the sum of the nucleation per unit time) and growth of the precipitates due to the enhanced diffusion velocity of the solute atoms. Decreasing the size and increasing the volume fraction of the SiC particles also accelerate the aging process by enhancing the total nucleation rate due to the increased dislocation density. It was found that the yield strengths have been well predicted by the model for both SiC-reinforced Al-Cu-Mg alloy and Al-Mg-Si alloy, which have plate-shaped and needle-shaped precipitates, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. J.W. Cahn and J.E. Hilliard: J. Chem. Phys., 1958, vol. 28, p. 25810.1063/1.1744102 ↗
2. J.W. Cahn: Acta Metall., 1962, vol. 10, p. 17910.1016/0001-6160(62)90114-1 ↗
3. O.R. Myhr, O. Grong and S.J. Anderson: Acta Mater., 2001, vol. 49, p. 6510.1016/S1359-6454(00)00301-3 ↗
4. S.C. Weakley-Bollin, W. Donlon, C. Wolverton, J.W. Jones and J.E. Allison: Metall. Mater. Trans. A, 2004, vol. 35A, p. 240710.1007/s11661-006-0221-9 ↗
5. F.S. Ham: J. Appl. Phys., 1959, vol. 17, p. 137
6. J.D. Eshelby: Proc. R. Soc. A, 1957, vol. A241, p. 376
7. K. Abbott and C.W. Haworth: Acta Metall., 1973, vol. 21, p. 95110.1016/0001-6160(73)90152-1 ↗
8. H. Wendt and P. Haasen: Acta Metall., 1983, vol. 31, p. 194610.1016/0001-6160(83)90163-3 ↗
9. Y.H. Chen and R.D. Doherty: Scripta Metall., 1977, vol. 11, p. 72510.1016/0036-9748(77)90065-5 ↗
10. J.S. Langer and A.J. Schwarz: Phys. Rev. A, 1980, vol. A21, p. 94810.1103/PhysRevA.21.948 ↗
11. H.R. Shercliff and M.F. Ashby: Acta Metall. Mater., 1990, vol. 38, p. 178910.1016/0956-7151(90)90291-N ↗
12. H.R. Shercliff and M.F. Ashby: Acta Metall. Mater., 1990, vol. 38, p. 180310.1016/0956-7151(90)90292-O ↗
13. A. Deschamps and Y. Brechet: Acta Mater., 1999, vol. 47, p. 28110.1016/S1359-6454(98)00293-6 ↗
14. A. Deschamps and Y. Brechet: Acta Mater., 1999, vol. 47, p. 29310.1016/S1359-6454(98)00296-1 ↗
15. H.L. Cox: Br. J. Appl. Phys., 1952, vol. 3, p. 7210.1088/0508-3443/3/3/302 ↗
16. A. Kelly: Strong Solids, Clarendon Press, Oxford, United Kingdom, 1973, p. 147
17. V.C. Nardone and K.M. Prewo: Scripta Metall., 1986, vol. 20, p. 4310.1016/0036-9748(86)90210-3 ↗
18. V.C. Nardone: Scripta Metall., 1987, vol. 21, p. 131310.1016/0036-9748(87)90105-0 ↗
19. M. Taya and R.J. Arsenault: Scripta Metall., 1983, vol. 17, p. 6710.1016/0036-9748(83)90072-8 ↗
20. R.J. Arsenault and R.M. Fisher: Scripta Metall., 1987, vol. 21, p. 131310.1016/0036-9748(87)90105-0 ↗
21. R.J. Arsenault and N. Shi: Mater. Sci. Eng., 1986, vol. 81, p. 17510.1016/0025-5416(86)90261-2 ↗
22. W.S. Miller and F.J. Humphreys: Scripta Metall., 1991, vol. 25, p. 3310.1016/0956-716X(91)90349-6 ↗
23. T.J. McElro and Z.C. Szkopiak: Int. Metall. Rev., 1972, vol. 17, p. 17510.1179/095066072790137684 ↗
24. H. Sekine and R. Chen: Composites, 1995, vol. 26, p. 18310.1016/0010-4361(95)91381-E ↗
25. M.F. Ashby: Phil. Mag., 1970, vol. 21, p. 39910.1080/14786437008238426 ↗
26. J.D Embury, D.J. Lloyd, and T.R. Ramachandran: in Aluminum Alloys–Contemporary Research and Applications, A.K. Vasudevan, R.D. Doherty, eds., Academic Press, New York, NY, 1989, p. 231
27. T.G. Nieh and R.F. Karlak: Scripta Metall., 1984, vol. 18, p. 2510.1016/0036-9748(84)90083-8 ↗
28. J.M. Papazian: Metall. Trans. A, 1988, vol. 19A, p. 294510.1007/BF02647721 ↗
29. I. Dutta, S.M. Allen and J.L. Hafley: Metall. Trans. A, 1992, vol. 22A, p. 2553
30. I. Dutta and D.L. Bourell: Mater. Sci. Eng. A, 1989, vol. A112, p. 6710.1016/0921-5093(89)90345-6 ↗
31. S. Suresh, T. Christman and Y. Sugimura: Scripta Metall., 1989, vol. 23, p. 159910.1016/0036-9748(89)90136-1 ↗
32. V.K. Varma, Y.R. Mahajan and V.V. Kutumbarao: Scripta Mater., 1997, vol. 37, p. 48510.1016/S1359-6462(97)00107-3 ↗
33. A.K. Jena and M.C. Chaturvedi: Phase Transformation in Materials, Prentice-Hall Press, Englewood Cliffs, NJ, 1992, p. 151
34. J.W. Cahn: Acta Metall., 1957, vol. 5, p. 16910.1016/0001-6160(57)90021-4 ↗
35. R. Gomez-Ramirez and G.M. Pound: Metall. Trans. A, 1973, vol. A4, p. 156310.1007/BF02668009 ↗
36. F.S. Ham: J. Phys. Chem. Solids, 1958, vol. 6, p. 33510.1016/0022-3697(58)90053-2 ↗
37. F.S. Ham: J. Appl. Phys., 1959, vol. 17, p. 137
38. G. Horvay and J.W. Cahn: Acta Metall., 1961, vol. 9, p. 69510.1016/0001-6160(61)90008-6 ↗
39. K.C. Russell: Adv. Coll. Interface Sci., 1980, vol. 13, p. 20510.1016/0001-8686(80)80003-0 ↗
40. D.A. Porter and K.E. Easterling: Phase Transformation in Metals and Alloys, Van Norstrand-Reinhold, Workingham, United Kingdom, 1992, p. 28510.1007/978-1-4899-3051-4 ↗
41. R.W. Cahn and P. Haasen: Physical Metallurgy, Elsevier, New York, NY, 1983, p. 933
42. K.R. Kinsman, H.I. Aaronson and C. Laird: Acta Metall. Mater., 1967, vol. 15, p. 124410.1016/0001-6160(67)90406-3 ↗
43. M. Ferrante and R.D. Doherty: Acta Metall., 1979, vol. 27, p. 160310.1016/0001-6160(79)90043-9 ↗
44. R. Wagner and R. Kampmann: in Materials Science Technology, R.W. Cahn P. Haasen, and E.J. Krammer, eds., VCH, Weinheim, 1991, vol. 5, p. 246
45. A.J. Ardell: Metall. Mater. Trans. A, 1985, vol. 16A, p. 213110.1007/BF02670416 ↗
46. A.W. Zhu and E.A. Starke Jr.: Acta Mater., 1999, vol. 47, p. 326310.1016/S1359-6454(99)00179-2 ↗
47. E. Hornbogen: Aluminum, 1967, vol. 43, p. 115
48. A.W. Zhu and E.A. Starke Jr.: Acta Mater., 2001, vol. 49, p. 115
49. M. Beyeler, M. Maurice and R. Seguin: Mem. Sci. Rev. Metall., 1970, vol. 67, p. 295
50. C.P. Blackenship, E.A. Starker, Jr., and E. Hornbogen: in Microstructure and Properties of Materials, J.C.M. Li, ed., World Scientific Publishing Corp. Ltd., Singapore, 1996, p. 4510.1142/9789814261326_0001 ↗
51. H. Hargarter, M.T. Lyttle and E.A. Starker Jr.: Mater. Sci. Eng. A, 1998, vol. 257, p. 8710.1016/S0921-5093(98)00826-0 ↗
52. G. Lorimer: in Precipitation in Solid, K.C. Russell and H.I. Aaronson, eds., TMS, Warrendale, PA, 1978, p. 87
53. R.A. Swalin: Thermodynamics of Solids, Wiley, New York, NY, 1962, p. 172
54. C. Laird and H.I. Aaronson: Acta Metall., 1966, vol. 14, p. 17110.1016/0001-6160(66)90298-7 ↗