journal article·2008-12

Residual Stresses in Friction-Stir-Welded 2195 and 7075 Aluminum Alloys

Omar Hatamleh, Iris V. Rivero, Arif Maredia

Publisher page

Abstract

Surface residual stresses (RSs) were characterized along friction-stir-welded 2195 and 7075 aluminum alloy (AA) plates. The surface measurements were obtained through X-ray diffraction (XRD) at five different locations along the weld. Each location consisted of several regions across the welded plate including the weld nugget, thermomechanically affected zone (TMAZ), heat-affected zone (HAZ), and base material. Measurements revealed that RSs were not uniform along the welded plate, with the highest RSs obtained on the middle of the plate. The RSs across the weld were also asymmetric relative to the weld centerline, with RSs as high as 231 MPa in the TMAZ for the retreating side of the weld.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, and M.G. Murch: Temple-296 Smith, 1991, and C.J. Dawes: Friction Stir Butt Welding, Int. Patent App. PCT/GB92/02203, GB Patent App. 9125978.8, 297, and U.S. Patent 5, 460,317, Oct. 1995
2. R.S. Mishra, Z.Y. Ma: Mater. Sci. Eng., 2005, vol. R50, pp. 1–7810.1016/j.mser.2005.07.001 ↗
3. P. Pao, S. Gill, C. Feng, K. Sankaran: Scripta Mater., 2001, vol. 45, pp. 605–1210.1016/S1359-6462(01)01070-3 ↗
4. C. Dale Donne, E. Lima, J. Wegener, A. Pyzalla, and T. Buslaps: Investigations on Residual Stresses in Friction Stir Welds, 3rd Int. Symp. on Friction Stir Welding, Kobe, Japan, 2001.
5. M.A. Sutton, B. Yang, A.P. Reynolds, and R. Taylor: Best of Aeromat Session, ASM Materials Solutions Conf. & Exhib., St. Louis, MO, October 9–12, 2000
6. R. John, K.V. Jata, K. Sadananda: Int. J. Fatigue, 2003, vol. 25 (9–11), pp. 939–4810.1016/j.ijfatigue.2003.08.002 ↗
7. M.W. Mahoney, C.G. Rhodes, J.G. Flintoff, R.A. Spurling, W.H. Bingel: Metall. Mater. Trans. A, Phys. Metall. Mater. Sci., 1998, vol. 29A (7), pp. 1955–6410.1007/s11661-998-0021-5 ↗
8. Clayton O. Ruud: Metals Handbook, American Society for Metals, Metals Park, OH, 2000
9. A.M. Jones: Residual Stresses—A Review of Their Measurement and Interpretation Using X-ray Diffraction, United Kingdom Atomic Energy Authority, London, 1989
10. C.O. Ruud, D.F. Carpenter: Operators Manual for the D-1000—A Stress Analyzer, Denver X-Ray Instruments, Inc., Englewood, CO, 1985.
11. Residual Stress Measurement by X-ray Diffraction, SAE J784a, M.E. Hilley, J.A. Larson, C.F. Jatczak, and R.E. Ricklefs, eds., Society of Automotive Engineers, Inc., New York, NY, 1971.
12. M.E. Fitzpatrick, A.T. Fry, P. Holdway, F.A. Kandil, J. Shackleton, L. Suominen: Determination of Residual Stresses by X-Ray Diffraction, National Physical Laboratory, Middlesex, 2002
13. B.D. Cullity, S.R. Stock: Elements of X-Ray Diffraction, 3rd ed., Prentice Hall, Upper Saddle River, NJ, 2001
14. O. Hatamleh, I.V. Rivero, and J. Lyons: J. Mater. Eng. Performance, 2007, vol. 16 (5), pp. 549–5310.1007/s11665-007-9091-6 ↗
15. G. Bussu, P.E. Irving: Int. J. Fatigue, 2003, vol. 25, pp. 77–8810.1016/S0142-1123(02)00038-5 ↗
16. M. Peel, A. Steuwer, M. Preuss, P.J. Withers: Acta Mater., 2003, vol. 51 (16), pp. 4791–480110.1016/S1359-6454(03)00319-7 ↗
17. M. James, M.W. Mahoney, and D.J. Waldron: Residual Stress Measurements in Friction Stir Welded Aluminum Alloys, Proc. 1st Int. Symp. on Friction Stir Welding, June 14–16, 1999
18. P. Reynolds, W. Tang, T. Gnaupel-Herold, H. Prask: Scripta Mater., 2003, vol. 48 (9), pp. 1289–9410.1016/S1359-6462(03)00024-1 ↗
19. P. Staron, M. Kocak, S. Williams, A. Wescott: Physica B: Condensed Matter, 2004, vol. 350 (1–3), pp. e491–e49310.1016/j.physb.2004.03.128 ↗
20. L. Fratini, B. Zuccarello: Int. J. Machine Tools Manufacture, 2006, vol. 46 (6), pp. 611–19.10.1016/j.ijmachtools.2005.07.013 ↗
21. M. Francois, B. Dionnet, J.M. Sprauel, F. Nardou: J. Appl. Cryst., 1995, vol. 28, pp. 761–6710.1107/S0021889895006868 ↗