Quench embrittlement of hardened 5160 steel as a function of austenitizing temperature
Source abstract
Abstract
Charpy V-notch (CVN) specimens from experimental heats of 5160 steel containing 0.001 and 0.034 mass pct phosphorus were austenitized at temperatures between 830 °C and 1100 °C, quenched to martensite, and tempered at temperatures between 100 °C and 500 °C. Scanning electron microscopy (SEM) was used to characterize the fracture surfaces of tested CVN specimens and carbide formation on prior austenite grain boundaries. Quench embrittlement, the susceptibility to intergranular fracture in as-quenched and low-temperature tempered high-carbon steels due to cementite formation as affected by phosphorus segregation on austenite grain boundaries, developed readily in specimens of the high phosphorus steel austenitized at all temperatures. The low phosphorus steel developed quench embrittlement only after austenitizing at 1100 °C. Intergranular fractures correlated with low room-temperature CVN impact toughness. The results are discussed with respect to the dissolution of carbides during austenitizing and the effect of phosphorus on grain boundary, carbide formation, and stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. S.K. Banerji, C.J. McMahon, Jr., and H.C. Feng: Metall. Trans. A, 1978, vol. 9A, pp. 237–47.10.1007/BF02646706 ↗
2. N. Banyopadhyay and C.J. McMahon, Jr.: Metall. Trans. A, 1983, vol. 14A, pp. 1313–32.10.1007/BF02664814 ↗
3. G. Krauss and C.J. McMahon, Jr.: in Martensite, G.B. Olson and W.S. Owen, eds., ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 295–321.
4. C.L. Briant: in Impurities in Engineering Materials, C.L. Briant, ed., Marcel Dekker, Inc., New York, NY, 1999, pp. 193–224.
5. G. Krauss: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 349–59.10.2355/isijinternational.35.349 ↗
6. G. Krauss: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 861–77.10.1007/s11661-001-0344-y ↗
7. R.S. Hyde, G. Krauss, and D.K. Matlock: 40th MWSP Conf. Proc., ISS, Warrendale, PA, 1998, pp. 921–28.
8. H.J. Grabke: in Impurities in Engineering Materials, C.L. Briant, ed., Marcel Dekker, Inc., New York, NY, 1999, pp. 143–92.
9. J.P. Materkowski and G. Krauss: Metall. Trans. A, 1979, vol. 10A, pp. 1643–51.10.1007/BF02811697 ↗
10. G. Krauss: Metall. Trans. A, 1978, vol. 9A, pp. 1527–35.10.1007/BF02661935 ↗
11. R.S. Hyde, D.K. Matlock, and G. Krauss: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1229–40.10.1007/BF02652297 ↗
12. V. Raghavan: Phase Diagrams of Temary Iron Alloys; Part 3 Ternary Systems Containing Iron and Phosphorus, 1st ed., Indian Institute of Metals, Calcutta, 1988, pp. 33–44.
13. T. Ando and G. Krauss: Metall. Trans. A, 1981, vol. 12A, pp. 1283–90.10.1007/BF02642342 ↗
14. F.A. Darnwish, L.C. Pereira, C. Gatts, and M.L. Graca: Mater. Sci. Eng., 1991, vol. A132, pp. L5-L9.10.1016/0921-5093(91)90388-4 ↗
15. A. Reguly: Ph.D. Thesis, Universidade Federal do Rio Grande do Sol, Porto Alegre, Brazil, 1999.
16. T. Maki, K. Tsuzaki, and I. Tamura: Trans. Iron Steel Inst. Jpn., 1986, vol. 20, pp. 207–14.10.2355/isijinternational1966.20.207 ↗
17. J.D. Wong, D.K. Matlock, and G. Krauss: 43rd MWSP Conf. Proc., ISS, Warrendale, PA, 2001, pp. 21–36.
18. G. Thomas: Metall. Trans. A, 1978, vol. 9A, pp. 439–50.10.1007/BF02646396 ↗
19. B.A. James, D.K. Matlock, and G. Krauss: 38th MWSP Conf. Proc., ISS, Warrendale, PA, 1997, vol. XXXIV, pp. 579–90.
20. E.L. Brown and G. Krauss: Metall. Trans. A, 1986, vol. 17A, pp. 31–36.10.1007/BF02644439 ↗
21. R.A. Grange: Trans. ASM, 1966, vol. 59, pp. 26–48.
22. D.L. Yaney: Master’s Thesis, Colorado School of Mines, Golden, CO, 1987.
23. H.I. Aaronson: in Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., Interscience Publishers, New York, NY, 1962, pp. 387–542.
24. T. Ando and G. Krauss: Acta Metall., 1981, vol. 29, pp. 351–63.10.1016/0001-6160(81)90161-9 ↗
25. N. Bandyopadhyay, J. Kameda, and C.J. McMahon, Jr.: Metall. Trans. A, 1983, vol. 14A, pp. 881–88.10.1007/BF02644292 ↗
26. Y. Weng and C.J. McMahon, Jr.: Mat. Sci. and Tech., 1987, vol. 3, pp. 207–216.10.1179/mst.1987.3.3.207 ↗
27. R.L. Bodner, J.R. Michael, S.S. Hansen, and R.I. Jaffee: 30th MWSP Conf. Proc., ISS, Warrendale, PA, 1988, pp. 173–94.
28. R.L. Bodner, T. Ohhashi, and R.I. Jaffee: Metall. Trans. A, 1989, vol. 20A, pp. 1445–60.10.1007/BF02665502 ↗
29. T. Majka: Master’s Thesis, Colorado School of Mines, Golden, CO, 2001.