journal article·2007-10

Solidification Curves for Commercial Mg Alloys Determined from Differential Scanning Calorimetry with Improved Heat-Transfer Modeling

Djordje Mirković, Rainer Schmid-Fetzer

Publisher page

Abstract

An improved method is presented for determination of solidification curves, i.e., fraction solid vs temperature, for commercial Mg alloys using heat-transfer model (HTM) differential scanning calorimetry (DSC) curves. A better evaluation of the measured DSC heat flow signal is attained through an independent measurement of the time constant as a function of temperature for the applied equipment. A further improvement is achieved through a more impartial interpretation of the measured DSC curves. Both improvements enable a better desmearing of the DSC signal and reduce the error induced by the operator. Challenging Mg alloys could be appropriately handled by optimizing the tantalum encapsulation. Highly reproducible DSC-HTM solidification curves are determined for seven Mg alloys of the AZ and AM series. The results indicate a potential of this method for simple, fast, and reliable determination of solidification curves even for such very reactive alloys with high vapor pressure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. G. Cao, S. Kou: Weld. J., 2006, vol. 85 (1), pp. 9–18
2. W. Fragner, H. Kaufmann, R. Potzinger: in Magnesium Alloys and Their Applications VI, K. Kainer, ed., Wiley-VCH, Weinheim, 2003, pp. 688–93
3. A. Lohmüller, M. Scharrer, R. Jenning, M. Hilbinger, M. Hartmann, R.F. Singer: in Magnesium Alloys and Their Applications VI, K. Kainer, ed., Wiley-VCH, Weinheim, 2003, pp. 738–43
4. S.C. Jeng, S.W. Chen, C.C. Huang: in Light Weight Alloys for Aerospace Applications III, E.W. Lee, N.J. Kim, K.V. Jata, W.E. Frazier, eds., TMS, Warrendale, PA, 1995, pp. 219–26
5. S.W. Chen, C.C. Huang: Acta Mater., 1996, vol. 44 (5), pp. 1955–6510.1016/1359-6454(95)00313-4 ↗
6. W.J. Boettinger, U.R. Kattner: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1779–9410.1007/s11661-002-0187-1 ↗
7. H.B. Dong, M.R.M. Shin, E.C. Kurum, H. Cama, J.D. Hunt: Fluid Phase Equilib., 2003, vol. 212 (1), pp. 199–20810.1016/S0378-3812(03)00257-7 ↗
8. W. Kurz, D.J. Fisher: Fundamentals of Solidification, 4th ed., Trans Tech Publications, Aedermannsdorf, 1998, pp. 125–26 and 280–83
9. M. Kiuchi, S. Sigiyama: Ann. CIRP, 1994, vol. 43 (1), pp. 271–7410.1016/S0007-8506(07)62211-2 ↗
10. S.I. Bakhtiyarov, R.A. Overfelt, S.G. Teodorescu: J. Fluids Eng., 2004, vol. 126, pp. 193–9710.1115/1.1677450 ↗
11. R.H. Mathiesen, L. Arnberg, F. Mo, T. Weitkamp, A. Snigirev: Phys. Rev. Lett., 1999, vol. 83 (4), pp. 5062–6510.1103/PhysRevLett.83.5062 ↗
12. B. Li, H.D. Brody, A. Kazimirov: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1039–4410.1007/s11661-006-0076-0 ↗
13. R.H. Mathiesen, L. Arnberg, K. Ramsoskar, T. Weitkamp, C. Rau, A. Snigirev: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 613–2310.1007/s11663-002-0041-2 ↗
14. R.H. Mathiesen, L. Arnberg: Acta Mater., 2005, vol. 53 (4), pp. 947–5610.1016/j.actamat.2004.10.050 ↗
15. R.H. Mathiesen, L. Arnberg: Mater. Sci. Eng. A, 2005, vol. 413, pp. 283–8710.1016/j.msea.2005.08.160 ↗
16. A. Prasad, H. Henein, F. Maire, C.A. Gandin: Can. Metall. Q., 2004, vol. 43 (2), pp. 273–8210.1179/cmq.2004.43.2.273 ↗
17. L. Bäckerud, E. Krol, J. Tamminen: Solidification Characteristics of Aluminium Alloys, vol. 1, Skanaluminium, Oslo, 1986, pp. 65–70
18. J. Tamminen: Ph.D. Thesis, University of Stockholm, Stockholm, 1988, pp. 3–34
19. H. Fredriksson, B. Rogberg: Met. Sci., 1979, vol. 3, pp. 685–9010.1179/030634579790434303 ↗
20. Y.W. Riddle, M.M. Makhlouf: in Magnesium Technology 2003, H.I. Kaplan, ed., TMS, San Diego, CA, 2003, pp. 101–06
21. S.W. Chen, C.C. Huang, J.C. Lin: Chem. Eng. Sci., 1995, vol. 50 (3), pp. 417–3110.1016/0009-2509(94)00244-L ↗
22. S.W. Chen, S.C. Jeng: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2722–2610.1007/BF02652366 ↗
23. D. Mirković, R. Schmid-Fetzer: Z. Metallkd., 2006, vol. 97, pp. 119–29
24. S.W. Chen, S.C. Jeng: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 503–0410.1007/s11661-997-0151-1 ↗
25. S.W. Chen, C.C. Lin, C.M. Chen: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1965–7210.1007/s11661-998-0022-4 ↗
26. D. Mirković, J. Gröbner, R. Schmid-Fetzer: in Magnesium Alloys and Their Applications VI, K. Kainer, ed., Wiley-VCH, Weinheim, 2003, pp. 842–47
27. H.B. Dong, J.D. Hunt: J. Therm. Anal. Calorim., 2001, vol. 64, pp. 341–5010.1023/A:1011578205887 ↗
28. H.B. Dong, M.R.M. Shin, E.C. Kurum, H. Cama, J.D. Hunt: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 441–4710.1007/s11661-003-0080-6 ↗
29. A.P. Gray: in Analytical Calorimetry, R.S. Porter, J.F. Johnson, eds., Plenum Press, New York, NY, 1968, pp. 209–1810.1007/978-1-4757-0001-5_27 ↗
30. H.B. Dong, J.D. Hunt: J. Therm. Anal. Calorim., 2001, vol. 64, pp. 167–7610.1023/A:1011589013639 ↗
31. W. Hemminger, H. Cammenga: Methoden der thermischen Analyse, Springer-Verlag, Berlin, 1989, pp. 140–6410.1007/978-3-642-70175-7 ↗
32. H.B. Dong, J.D. Hunt: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 470–7310.1016/j.msea.2005.09.023 ↗
33. D.K. Banerjee, W.J. Boetinger, R.J. Schafer, M.E. Williams: in Modelling of Casting, Welding and Advanced Solidification Processes VII, M. Cross, J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 491–98
34. K.R. Loeblich: Thermochim. Acta, 1985, vol. 83, pp. 99–10610.1016/0040-6031(85)85797-X ↗
35. U. Ulbrich, H.K. Cammenga: Thermochim. Acta, 1993, vol. 229, pp. 53–6710.1016/0040-6031(93)80314-Z ↗
36. K.R. Loeblich: Thermochim. Acta, 1994, vol. 231, pp. 7–2010.1016/0040-6031(94)80002-2 ↗
37. G.W.H. Höhne, W. Hemminger, H.-J. Flammersheim: Differential Scanning Calorimetry: an Introduction for Practitioners, Springer-Verlag, Berlin, 1996, pp. 84–10410.1007/978-3-662-03302-9 ↗
38. G.W.H. Höhne, W. Hemminger, H.-J. Flammersheim: Differential Scanning Calorimetry: an Introduction for Practitioners, Springer-Verlag, Berlin, 1996, pp. 21–8010.1007/978-3-662-03302-9_3 ↗
39. S.M. Sarge, G.W.H. Höhne, H.K. Cammenga, W. Eysel, E. Gmelin: Thermochim. Acta, 2000, vol. 361, pp. 1–2010.1016/S0040-6031(00)00543-8 ↗
40. A. Lindemann, J. Schmidt, M. Todte, T. Zeuner: Thermochim. Acta, 2002, vol. 382, pp. 269–7510.1016/S0040-6031(01)00752-3 ↗
41. H.G. Wiedemann, A. van Tets: Thermochim. Acta, 1970, vol. 1, pp. 159–7210.1016/0040-6031(70)85006-7 ↗
42. M. Ohno, D. Mirković, R. Schmid-Fetzer: Acta Mater., 2006, vol. 54, pp. 3883–9110.1016/j.actamat.2006.04.022 ↗
43. J. Gröbner, D. Mirković, R. Schmid-Fetzer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3349–6210.1007/s11661-004-0172-y ↗
44. D. Larouche, C. Laroche, M. Bouchard: Acta Mater., 2003, vol. 51, pp. 2161–7010.1016/S1359-6454(03)00003-X ↗
45. N. Saunders: in COST507—Thermochemical Database for Light Metal Alloys, I. Ansara, A.T. Dinsdale, M.H. Rand, eds., European Communities, Luxembourg, 1998, pp. 28–33
46. W.F. Hemminger, S.M. Sarge: J. Therm. Anal., 1991, vol. 37, pp. 1455–7710.1007/BF01913481 ↗
47. S.L. Chen, S. Daniel, F. Zhang, Y.A. Chang, W.A. Oates, R. Schmid-Fetzer: J. Phase Equilib., 2001, vol. 22, pp. 373–7810.1361/105497101770332910 ↗
48. M. Ohno, R. Schmid-Fetzer: Int. J. Mater. Res. (Z. Metallkd.), 2006, vol. 97, pp. 526–3210.3139/146.101268 ↗
49. M. Ohno, D. Mirković, R. Schmid-Fetzer: Mater. Sci. Eng. A, 2006, vol. 421, pp. 328–3710.1016/j.msea.2006.02.006 ↗
50. R. Schmid-Fetzer, J. Gröbner: Adv. Eng. Mater., 2001, vol. 3 (12), pp. 947–6110.1002/1527-2648(200112)3:12<947::AID-ADEM947>3.0.CO;2-P ↗
51. F.Y. Xie, X.Y. Yan, L. Ding, F. Zhang, S.L. Chen, M.G. Chu, Y.A. Chang: Mater. Sci. Eng. A, 2003, vol. 355, pp. 144–5310.1016/S0921-5093(03)00056-X ↗
52. K. H. Schönborn: Thermochim. Acta, 1983, vol. 69, pp. 103–1410.1016/0040-6031(83)85069-2 ↗
53. I.G. Chen, D.M. Stefanescu: AFS Trans., 1984, vol. 92, pp. 947–64
54. E. Fras, W. Kapturkiewicz, A. Burbielkoa, H.F. Lopez: AFS Trans., 1993, vol. 101, pp. 505–11
55. A. Diószegi, I.L. Svensson: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 474–7910.1016/j.msea.2005.09.052 ↗