Solidification Sequence of Spray-Formed Steels
Source abstract
Abstract
Solidification in spray-forming is still an open discussion in the atomization and deposition area. This paper proposes a solidification model based on the equilibrium solidification path of alloys. The main assumptions of the model are that the deposition zone temperature must be above the alloy’s solidus temperature and that the equilibrium liquid fraction at this temperature is reached, which involves partial remelting and/or redissolution of completely solidified droplets. When the deposition zone is cooled, solidification of the remaining liquid takes place under near equilibrium conditions. Scanning electron microscopy (SEM) and optical microscopy (OM) were used to analyze the microstructures of two different spray-formed steel grades: (1) boron modified supermartensitic stainless steel (SMSS) and (2) D2 tool steel. The microstructures were analyzed to determine the sequence of phase formation during solidification. In both cases, the solidification model proposed was validated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Materials Engineering and Processing · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. M. M. Pariona, C. Bolfarini, R. J. Dos Santos, and C. S. Kiminami, J. Mater. Process. Technol. 102, 221–29 (2000).10.1016/S0924-0136(00)00482-9 ↗
2. P. S. Grant, Prog. Mater. Sci. 39, 497–545 (1995).10.1016/0079-6425(95)00004-6 ↗
3. A. Schulz, V. Uhlenwinkel, C. Escher, R. Kohlmann, A. Kulmburg, M. C. Montero, R. Rabitsch, W. Schützenhöfer, D. Stocchi, and D. Viale, Mater. Sci. Eng. A 477, 69–79 (2008).10.1016/j.msea.2007.08.082 ↗
4. C. Cui, A. Schulz, and V. Uhlenwinkel, Materwiss. Werksttech. 45, 652–65 (2014).10.1002/mawe.201400302 ↗
5. J. Mi and P. S. Grant, Acta Mater. 56, 1588–96 (2008).10.1016/j.actamat.2007.12.021 ↗
6. J. Mi and P. S. Grant, Acta Mater. 56, 1597–1608 (2008).10.1016/j.actamat.2007.12.022 ↗
7. C. Meyer, N. Ellendt, L. Mädler, H. R. Müller, F. Reimer, and V. Uhlenwinkel, Materwiss. Werksttech., 2014, pp. 642–51.10.1002/mawe.201400301 ↗
8. N. Ellendt, V. Uhlenwinkel, and L. Mädler, Materwiss. Werksttech. 45, 699–707 (2014).10.1002/mawe.201400306 ↗
9. L. A. Bereta, C. F. Ferrarini, C. S. Kiminami, W. J. F. Botta, and C. Bolfarini, Mater. Sci. Eng. A 448–451, 850–53 (2007).10.1016/j.msea.2006.02.241 ↗
10. C. F. Ferrarini, C. Bolfarini, C. S. Kiminami, and W. J. Botta F, Mater. Sci. Eng. A 375-377, 577–80 (2004).10.1016/j.msea.2003.10.062 ↗
11. H. A. Godinho, A. L. R. Beletati, E. J. Giordano, and C. Bolfarini, J. Alloys Compd. 586, S139–42 (2014).10.1016/j.jallcom.2012.12.122 ↗
12. A. P. D. B. Guerra, N. Ellendt, V. Uhlenwinkel, P. S. C. P. da Silva, and C. Bolfarini, Materwiss. Werksttech. 45, 568–73 (2014).10.1002/mawe.201400217 ↗
13. A. H. Kasama, A. J. Mourisco, C. S. Kiminami, W. J. Botta Fo, and C. Bolfarini, Mater. Sci. Eng. A 375-377, 589–94 (2004).10.1016/j.msea.2003.10.093 ↗
14. C. Banjongprasert, S. C. Hogg, E. Liotti, C. A. Kirk, S. P. Thompson, J. Mi, and P. S. Grant, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 41, 3208–15 (2010).
15. E. J. Lavernia and Y. Wu: Spray Atomization and Deposition, 1st ed., John Wiley & Sons, Inc., New York, 1996, pp. 331–42.
16. P. S. Grant, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 38A, 1520–29 (2007).
17. H. Henein, Materwiss. Werksttech. 41, 555–61 (2010).10.1002/mawe.201000642 ↗
18. N. J. Calos, E. Graham, D. R. Cousens, P. Christodoulou, C. H. L. Kennard, L. K. Bekessy, and S. F. Parker, Mater. Trans. 42, 496–501 (2001).10.2320/matertrans.42.496 ↗
19. P. Christodoulou and N. Calos, Mater. Sci. Eng. A 301, 103–17 (2001).10.1016/S0921-5093(00)01808-6 ↗
20. K.. Mingard, P.. Alexander, S.. Langridge, G.. Tomlinson, and B. Cantor, Acta Mater. 46, 3511–21 (1998).10.1016/S1359-6454(98)00034-2 ↗
21. C. Cui, U. Fritsching, A. Schulz, R. Tinscher, K. Bauckhage, and P. Mayr, J. Mater. Process. Technol. 168, 496–504 (2005).10.1016/j.jmatprotec.2005.02.250 ↗
22. V. Uhlenwinkel and N. Ellendt, Prog. Powder Metall. Pts 534-536, 429–32 (2007).
23. C. Kramer, V. Uhlenwinkel, and K. Bauckhage, Solidif. 1998 401–13 (1998).
24. A. V. Freyberg, M. Buchholz, V. Uhlenwinkel, and H. Henein, Metall. Mater. Trans. B 34, 243–53 (2003).10.1007/s11663-003-0011-3 ↗
25. A. Hyodo, C. Bolfarini, and T. T. Ishikawa, Mater. Res. J. Mater. 15, 739–48 (2012).
26. C. Meyer, N. Ellendt, V. C. Srivastava, and V. Uhlenwinkel, Int. J. Mater. Res. 103, 1090–95 (2012).10.3139/146.110802 ↗
27. C. R.. Afonso, C. Bolfarini, C.. Kiminami, N.. Bassim, M.. Kaufman, M.. Amateau, T.. Eden, and J.. Galbraith, Scr. Mater. 44, 1625–28 (2001).10.1016/S1359-6462(01)00787-4 ↗
28. C. R. M. Afonso, C. Bolfarini, C. S. Kiminami, N. D. Bassim, M. J. Kaufman, M. F. Amateau, T. J. Eden, and J. M. Galbraith, J. Non. Cryst. Solids 284, 134–38 (2001).10.1016/S0022-3093(01)00392-1 ↗
29. C. R. M. Afonso, C. Bolfarini, W. J. B. Filho, and C. S. Kiminami, Mater. Sci. Eng. A 448-451, 884–89 (2007).10.1016/j.msea.2006.02.393 ↗
30. L. F. Bonavina, C. Bolfarini, W. J. Botta, E. R. D’Almeida, and C. S. Kiminami, J. Alloys Compd. 495, 417–19 (2010).10.1016/j.jallcom.2009.11.023 ↗
31. C. S. Kiminami, W. J. Botta, and C. Bolfarini, Materwiss. Werksttech. 41, 513–23 (2010).10.1002/mawe.201000637 ↗
32. D. Uhlenhaut, J. Kradolfer, W. Puttgen, J. Loffler, and P. Uggowitzer, Acta Mater. 54, 2727–34 (2006).10.1016/j.actamat.2006.02.021 ↗