Effect of prior-austenite grain size and transformation temperature on nodule size of microalloyed hypereutectoid steels
Source abstract
Abstract
The effect of prior-austenite grain size and transformation temperature on nodule size and colony size of hypereutectoid steels containing 1 pct carbon with different levels of vanadium and silicon was investigated. Specimens of the various steels were thermally processed at various temperatures ranging from 900 °C to 1200 °C and transferred to salt bath conditions at 550 °C, 580 °C, and 620 °C to examine the structural evolution of pearlite. The heat-treatment work showed that for only the hypereutectoid steel without vanadium there was a continuous grain boundary cementite network, the thickness of which increased with increasing reheat temperature. Analysis of the thermally processed hypereutectoid steels also indicated that the prior-austenite grain size and transformation temperature controlled the nodule size, while the colony size was dependent on the latter only.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. F.A. Khalid, D.A. Gilroy, and D.V. Edmonds: Processing, Microstructure and Properties of Microalloyed and Other Modern High Strength Low Alloy Steels, Proc., Pittsburgh, PA, 1992, A.J. DeArdo, ed., TMS-AIME, Warrendale, PA, 1992, pp. 67–75.
2. E.E. Laufer and D.M. Fegredo: Can. Met. Q., 1983, vol. 22, pp. 193–99.10.1179/cmq.1983.22.2.193 ↗
3. F.B. Pickering and B. Garbarz: Mater. Sci. Technol., 1989, vol. 5, pp. 227–37.10.1179/mst.1989.5.3.227 ↗
4. G.L. Dunlop, C.J. Carlsson, and G. Frimodig: Metall. Trans. A, 1978, vol. 9A, pp. 261–66.10.1007/BF02646709 ↗
5. T.D. Mottishaw and G.D.W. Smith: HSLA Steels Technology and Applications, Inst. Conf. Proc., ASM INTERNATIONAL, Philadelphia, PA, 1984, pp. 163–75.
6. T. Tarui, T. Takahashi, S. Ohashi, and R. Uemori: I & SM 1994, pp. 25–31.
7. J.R. Vilella, G.E. Guellich, and E.C. Bain: 17th Annual Convention of the Society, Transactions of the A.S.M., Chicago IL, 1935, pp. 225–61.
8. F.C. Hull and R.F. Mehl: Trans. ASM, 1942, vol. 30, pp. 381–424.
9. N.T. Belaiew: J. Iron Steel Inst., 1922, vol. 60, pp. 201–39.
10. G.E. Pellisier, M.F. Hawkes, W.A. Johnson, and R.F. Mehl: Trans. ASM, 1942, vol. 29, pp. 1049–86
11. F.C. Hull, R.A. Colten, and R.F. Mehl: Trans. AIME, 1942, vol. 150, pp. 185–207.
12. K. Han, T.D. Mottishaw, G.D.W. Smith, D.V. Edmonds, and A.G. Stacey: Mater. Sci. Eng, 1995, vol. 190A, pp. 207–14.10.1016/0921-5093(94)09604-U ↗
13. K. Han, T.D. Mottishaw, G.D.W. Smith, and D.V. Edmonds: Mater. Sci. Technol. 1994, vol. 10, pp. 955–63.10.1179/mst.1994.10.11.955 ↗
14. F.A. Khalid and D.V. Edmonds: Scripta Metall. Mater., 1994, vol. 30, pp. 1251–55.10.1016/0956-716X(94)90254-2 ↗
15. ASTM standard E112-96, “Standard Test Methods for Determining Average Grain Size,” Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1996, vol. 03.01, pp. 251–74.
16. E.E. Underwood: Quantitative Stereology, Addison-Wesley, Reading, MA, 1970, pp. 73–75.
17. R.W.K. Honeycombe: Steels Microstructure and Properties, Edward Arnold, London, 1981.
18. S. Serajzadeh and A.K. Taheri: Mater. Lett., 2002, vol. 56, pp. 984–89.10.1016/S0167-577X(02)00659-6 ↗
19. S. Zajac, T. Siweck, W.B. Hutchinson, and R. Lagneborg: Iron Steel Inst. Jpn. Int., 1998, vol. 38, pp. 1130–39.10.2355/isijinternational.38.1130 ↗
20. A.M. Elwazri, P. Wanjara, and S. Yue: Mater. Sci. Eng., 2003, vol. 339A, pp. 209–15.10.1016/S0921-5093(02)00164-8 ↗
21. A.M. Elwazri, P. Wanjara, and S. Yue: Iron Steel Inst. Jpn., 2004, vol. 45, pp. 162–70.10.2355/isijinternational.44.162 ↗
22. A.M. Elwazri: Ph.D. Thesis, McGill University, Montreal, 2004.
23. J.G. Zimmerman, R.H. Aboron, and E.C. Bain: Trans. ASM, 1937, vol. 25, pp. 755–87.
24. K. Han, G.D.W. Smith, and D.V. Edmonds: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1617–31.10.1007/BF02670750 ↗
25. K. Han: Scripta Metall., 1993, vol. 28, pp. 699–702.10.1016/0956-716X(93)90037-S ↗
26. T. Wada, H. Wada, J.F. Elliot, and J. Chipman: Metall. Trans., 1972, vol. 3, pp. 1657–62.10.1007/BF02643059 ↗
27. A.R. Marder and B.L. Bramfitt: Metall Trans., 1975, vol. 6, pp. 2009–14.10.1007/BF03161825 ↗
28. A.R. Marder and B.L. Bramfitt: Metall Trans., 1976, vol. 7, pp. 365–72.10.1007/BF02642832 ↗
29. B. Garbarz and F.B. Pickering: Scripta Metall., 1987, vol. 21, pp. 249–53.10.1016/0036-9748(87)90207-9 ↗
30. B. Garbarz and R. Kuziak: Microalloying ’95, ISS, Pittsburgh, PA, 1995, 409–20.