Microstructural Evolution of Hypoeutectic, Near-Eutectic, and Hypereutectic High-Carbon Cr-Based Hard-Facing Alloys
Source abstract
Abstract
A series of high-carbon Cr-based hard-facing alloys were successfully fabricated on a substrate of 0.45 pct C carbon steel by gas tungsten arc welding (GTAW) process using various alloy fillers with chromium and chromium carbide, CrC (Cr:C = 4:1) powders. These claddings were designed to observe hypoeutectic, near-eutectic, and hypereutectic structures with various (Cr,Fe)23C6 and (Cr,Fe)7C3 carbides at room temperature. According to X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and optical microscopy (OM), in 3.8 pct C cladding, the microstructure consisted of the primary carbides with outer shells (Cr,Fe)23C6 surrounding (Cr,Fe)7C3 cores and [α + (Cr,Fe)23C6] eutectic structures. In 5.9 pct C cladding, the composite comprised primary (Cr,Fe)7C3 as the reinforcing phase and [α + (Cr,Fe)7C3] eutectic structures as matrix. Various morphologies of carbides were found in primary and eutectic (Cr,Fe)7C3 carbides, which included bladelike and rodlike (with a hexagonal cross section). The 5.9C cladding with great amounts of primary (Cr,Fe)7C3 carbides had the highest hardness (approximately HRC 63.9) of the all conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. ASM International Handbook Committee: ASM Handbook, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 18, pp. 758–68.
2. I.M. Hutchings: Tribology: Friction and Wear of Engineering Materials, Elsevier Limited, Cambridge, 1992, pp. 133–47.
3. S.O. Yılmaz: Surf. Coat. Technol., 2006, vol. 201, pp. 1568–75.10.1016/j.surfcoat.2006.02.038 ↗
4. C. Fan, M.C. Chen, C.M. Chang, and W. Wu: Surf. Coat. Technol., 2006, vol. 201, pp. 908–12.10.1016/j.surfcoat.2006.01.010 ↗
5. C.W. Kuo, C. Fan, S.H. Wu, and W. Wu: Mater. Trans., 2007, vol. 48, pp. 2324–28.10.2320/matertrans.MB200716 ↗
6. P.Q. La, Q.J. Xue, and W.M. Liu: Wear, 2001, vol. 249, pp. 94–100.10.1016/S0043-1648(01)00523-3 ↗
7. S. Frangini, A. Masci, and A.D. Bartolomeo: Surf. Coat. Technol., 2002, vol. 149, pp. 279–86.10.1016/S0257-8972(01)01450-5 ↗
8. P.Q. La, Q.J. Xue, W.M. Liu, and S.R. Yang: Wear, 2000, vol. 240, pp. 1–8.10.1016/S0043-1648(00)00332-X ↗
9. A.F. Zhang, J.D. Xing, L. Fang, and J.Y. Su: Wear, 2004, vol. 257, pp. 198–204.10.1016/j.wear.2003.12.002 ↗
10. H. Berns: Wear, 2003, vol. 254, pp. 47–54.10.1016/S0043-1648(02)00300-9 ↗
11. J.D. Xing, Y.M. Gao, E.Z. Wang, and C.G. Bao: Wear, 2002, vol. 252, pp. 755–60.10.1016/S0043-1648(02)00015-7 ↗
12. S. Aso, S. Goto, Y. Komatsu, and W. Hartono: Wear, 2001, vol. 250, pp. 511–17.10.1016/S0043-1648(01)00600-7 ↗
13. A.G. Blake, A.A. Mangaly, M.A. Everett, and A.H. Hammeke: SPIE Conference Proceedings, 1st ed., SPIE Publications, Bellingham, WA, 1988, pp. 56–61.10.1117/12.947702 ↗
14. E. Eiholzer, C. Cusano, and J. Mazumder: Proc. Laser Inst. Am., 1984, vol. 44, pp. 159–67.
15. K. Komvopoulo and K. Nagarathnam: J. Eng. Mater. Technol., 1990, vol. 112, pp. 131–43.10.1115/1.2903299 ↗
16. O. Yılmaz, M. Özenbaş, and M.H. Korkut: Mater. Sci. Technol., 2002, vol. 18, pp. 1209–17.10.1179/026708302225005891 ↗
17. M.H. Korkut, O. Yilmaz, and S. Buytoz: Surf. Coat. Technol., 2002, vol. 157, pp. 5–13.10.1016/S0257-8972(02)00041-5 ↗
18. S. Buytoz, M.M. Yildirim, and H. Eren: Mater. Lett., 2005, vol. 59, pp. 607–14.10.1016/j.matlet.2004.08.038 ↗
19. S.O. Yılmaz: Surf. Coat. Technol., 2005, vol. 194, pp. 175–83.10.1016/j.surfcoat.2004.08.227 ↗
20. A. Lesko and E. Navara: Mater. Charact., 1996, vol. 36, pp. 349–56.10.1016/S1044-5803(96)00068-X ↗
21. G.V. Raynor and V.G. Rivlin: Phase Equilibria in Iron Ternary Alloys, The Institute of Metals, Bath Press, United Kingdom, 1988, pp. 143–56.
22. K. Bungardt, E. Kunze, and E. Horn: Arch. Eisenhüttenwes., 1958, vol. 29, pp. 193–201.10.1002/srin.195802238 ↗
23. M. Chochol, J.F. Elliott and D.M. Kundrat: Metall. Trans. B, 1984, vol. 15B, pp. 663–76.
24. R.S. Jackson: J. Iron Steel Inst., 1970, vol. 208, pp. 163–70.