Bimodal Grain Size Distribution Enhances Strength and Ductility Simultaneously in a Low-Carbon Low-Alloy Steel
Source abstract
Abstract
Low-carbon low-alloy steel specimens were quenched, then cold rolled, and finally annealed. Electron backscatter diffraction (EBSD) micrographs revealed a bimodal grain structure where ultra-fine grain structures with low-angle grain boundaries are alternating with regions of larger grains. The average total dislocation density was measured by X-ray line profile analysis, whereas the geometrically necessary dislocation density was obtained from the analysis of EBSD data. Using the combination of the Hall-Petch and Taylor equations, a good correlation was found between the total dislocation density and the measured flow stress in the different states of the alloy. The difference in evolutions of the total and the geometrically necessary component of the dislocation densities is discussed in terms of the successive processes of quenching, rolling, and annealing of the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. T.K. Sooi, P.S. Green, R. Sause, and J.M. Ricles: Proc. Int. Symp. High Perform. Steels Struct. Appl., Cleveland, OH. 1995, pp. 35-43.
2. G.I. Taylor: Proc. Roy. Soc., 1934, vol. A145, pp. 362-87.10.1098/rspa.1934.0106 ↗
3. E.O. Hall: Proc. Phys. Soc., 1951, vol. 64B, pp. 747-53.10.1088/0370-1301/64/9/303 ↗
4. N.J. Petch, J. Iron Steel Inst., 1953, vol.174, pp. 25-8.
5. V.M. Segal, Mater. Sci. Eng., 1995, vol. A197, pp. 157-64.10.1016/0921-5093(95)09705-8 ↗
6. R.Z. Valiev, R.K. Islamgaliev, I.V. Alexandrov, Prog. Mater. Sci., 2000, vol. 45, pp. 103-189.10.1016/S0079-6425(99)00007-9 ↗
7. Y. Saito, H. Utsunomiya, N. Tsuji, T. Sakai, Acta Mater. 1999, vol. 47, pp. 579–583.10.1016/S1359-6454(98)00365-6 ↗
8. N. Tsuji, Y. Saito, S.-H. Lee, Y. Minamino, Adv. Eng. Mater., 2003, vol 5 pp. 338- 344.10.1002/adem.200310077 ↗
9. A. Zhilyaev, T. Langdon, Prog. Mater. Sci., 2008, vol. 53, pp. 893-979.10.1016/j.pmatsci.2008.03.002 ↗
10. J.R. Weertman, D. Farkas, K. Hemker, H. Kung, M. Mayo, R. Mitra, H. Swygenhoven, MRS Bull., 1999, vol. 24 pp. 44-50.10.1557/S088376940005154X ↗
11. C.C. Koch, J. Metastable Nanocryst. Mater., 2003, vol. 18, pp. 9.10.4028/www.scientific.net/JMNM.18.9 ↗
12. M.F. Tambwe, D.S. Stone, J. Mater. Res., 1999, vol. 14, pp. 407-17.10.1557/JMR.1999.0059 ↗
13. S.N. Mathaudhu, K.T. Hartwig, Mater. Sci. Eng., 2006, vol. A426, pp. 128-42.10.1016/j.msea.2006.03.089 ↗
14. X.L. Wu, E. Ma, Mater. Sci. Eng., 2008, vol. A483, pp. 84-86.10.1016/j.msea.2006.07.173 ↗
15. M.B. Kerber, M.J. Zehetbauer, E. Schafler, F.C. Spieckermann, S. Bernstorff, T. Ungár, JOM, 2011, vol. 63, pp. 61-70.10.1007/s11837-011-0115-1 ↗
16. T. Ungár, L.Li, G.Tichy, W.Pantleon, H.Choo, P.K.Liaw, Scripta Mater., 2011, vol. 64, pp. 876-79.10.1016/j.scriptamat.2011.01.022 ↗
17. B. Joni, E. Schafler, M. Zehetbauer, G. Tichy, T. Ungár, Acta Mater., 2013, vol. 61, pp. 632-42.10.1016/j.actamat.2012.10.008 ↗
18. W. Skrotzki, A. Eschke, B. Jóni, T. Ungár, L.S. Tóth, Y. Ivanisenko, L. Kurmanaeva, Acta Mater., 2013, vol. 61, pp. 7271-84.10.1016/j.actamat.2013.08.032 ↗
19. S. Takebayashi, T. Kunieda, N. Yoshinaga, K. Ushioda, S. Ogata, ISIJ Internat., 2010, vol. 50, pp. 875-882.10.2355/isijinternational.50.875 ↗
20. R. Ueji, N. Tsuji, Y. Minamino, Y. Koizumi, Acta Mater., 2002, vol. 50, pp. 4177- 4189.10.1016/S1359-6454(02)00260-4 ↗
21. H. Azizi-Alizamini, M. Militzer, W.J. Poole, Scripta Mater., 2007, vol. 57, pp. 1065- 1068.10.1016/j.scriptamat.2007.08.035 ↗
22. G. Krauss, Mater. Sci. Eng., 1999, vol. A273–275, pp. 40–57.10.1016/S0921-5093(99)00288-9 ↗
23. C. Wang, M. Wang, J. Shi, W. Hui, H. Dong, J. Mater. Sci. Technol., 2007, vol. 23, pp. 659-64.
24. L.P. Kubin, A. Mortensen, Scripta Mater., 2003, vol. 48, pp. 119–25.10.1016/S1359-6462(02)00335-4 ↗
25. H. Gao, Y. Huang, W.D. Nix, J.W. Hutchinson, J. Mech. Phys. Solids, 1999, vol. 47, pp. 1239-63.10.1016/S0022-5096(98)00103-3 ↗
26. J.F. Nye, Acta Metall., 1953, vol. 1, pp. 153–62.10.1016/0001-6160(53)90054-6 ↗
27. B.S. El-Dasher, B.L. Adams, A.D. Rollett, Scripta Mater., 2003, vol. 48, pp. 141-5.10.1016/S1359-6462(02)00340-8 ↗
28. D.P. Field, P. Trivedi, S.I. Wright, M. Kumar, Ultramicroscopy, 2005, vol. 103, pp. 33-39.10.1016/j.ultramic.2004.11.016 ↗
29. W. Pantleon, Scripta Mater., 2008, vol. 58, pp. 994–7.10.1016/j.scriptamat.2008.01.050 ↗
30. T. Ungár, S. Ott, P. G. Sanders, A. Borbély, J. R.Weertman, Acta Mater., 1998, vol. 46 pp. 3693-9.10.1016/S1359-6454(98)00001-9 ↗
31. B.E. Warren, X-ray diffraction, Dover Publ. New York, 1996.
32. M. Wilkens: Fundamental Aspects of Dislocation Theory, vol. II. No. 317, J.A. Simmons, R. de Wit, R. Bullough, eds., Nat. Bur. Stand. Spec. Publ. 1970, Washington, DC, pp. 1195-1221.
33. T. Ungár, I. Dragomir, Á. Révész, A. Borbély, J. Appl. Cryst., 1999, vol. 32, 992- 1002.10.1107/S0021889899009334 ↗
34. T. Ungár, G. Tichy, Phys. Stat. Sol., 1999, a147, pp. 425-34.10.1002/(SICI)1521-396X(199902)171:2<425::AID-PSSA425>3.0.CO;2-W ↗
35. G. Ribárik, T. Ungár, Mater. Sci. Eng., 2010, vol. A528, pp. 112–121.10.1016/j.msea.2010.08.059 ↗
36. W.C. Hinds, Aerosol Technology: Properties, Behavior and Measurement of Airbone Particles, 1982, Wiley, New York.
37. A. K. De, D. C. Murdock, M. C. Mataya, J. G. Speer, D. K. Matlock, Scripta Mater., 2004, vol. 50, pp. 1445-1449.10.1016/j.scriptamat.2004.03.011 ↗
38. M.L. Martinez-Perez, F.J. Mompean, J. Ruiz-Hervias, C.R. Borlado, J.M. Atienza, M. Garcia-Hernandez, M. Elices, J. Gil-Sevillano, R.L. Peng, T. Buslaps, Acta Mater., 2004, vol. 52, pp. 5303–5313.10.1016/j.actamat.2004.07.036 ↗
39. G.K. Williamson, W.H. Hall, Acta metall., 1953, vol. 1, pp. 22-31.10.1016/0001-6160(53)90006-6 ↗
40. T. Ungár, A. Borbély, Appl. Phys. Lett., 1996 69, 3173–5.10.1063/1.117951 ↗
41. S. Harjo, Y. Tomota, P. Lukas, D. Neov, M. Vrana, P. Mikula, M. Ono, Acta mater., 2001, vol. 49, pp. 2471-2479.10.1016/S1359-6454(01)00147-1 ↗
42. K. An, H. Skorpenske, A.D. Stoica, D. Ma, X.-L. Wang, E. Cakmak, Metall. Mater. Trans.., 2011, vol. 42A, pp. 95-99.10.1007/s11661-010-0495-9 ↗
43. H. Conrad, K. Jung, Mater. Sci. Eng. 2005, vol. A391, pp. 272-84.10.1016/j.msea.2004.08.073 ↗
44. I. Dubravina, M. Zehetbauer, E. Schafler, I. Alexandrov., Mater. Sci. Eng., 2004, vol. A387-389, pp. 817-21.10.1016/j.msea.2004.03.093 ↗
45. X. Zhang, N. Hansen, Y. Gao, X. Huang, Acta Mater., 2012, vol. 60 pp. 5933-43.10.1016/j.actamat.2012.07.037 ↗
46. H. Kitahara, R. Ueji, N. Tsuji, Y. Minamino, Acta Mater., 2006, vol. 54, pp. 1279-88.10.1016/j.actamat.2005.11.001 ↗
47. D.P. Field, C.C. Merriman, N. Allain-Bonasso, F. Wagner, Model. Simul. Mater. Sci. Eng., 2012, vol. 20, pp. 024007.10.1088/0965-0393/20/2/024007 ↗
48. K. Maruyama, K. Sawada, J.-I. Koike, ISIJ International, 2001, vol. 41, pp. 641-53.10.2355/isijinternational.41.641 ↗
49. L. Li, T. Ungár, Y.D. Wang, J.R. Morris, G. Tichy, J. Lendvai, Y.L. Yang, Y. Ren, H. Choo, P.K. Liaw, Acta Mater., 2009, vol. 57, pp. 4988-5000.10.1016/j.actamat.2009.07.002 ↗
50. B. Sestak, A. Seeger, Z. Metallkde., 1978, vol. 69, pp. 425-32.
51. Y. Wang, M. Chen, F. Zhou, E. Ma, Lett. Nature, 2002, vol. 419, pp. 912-5.10.1038/nature01133 ↗
52. R.Z. Valiev, Nature Mater., 2004, vol. 3, pp. 511-6.10.1038/nmat1180 ↗
53. L.-A Norstrom, Scand. J. Metall., 1976, vol. 5, pp. 159-165.
54. R.W. Armstrong, Acta Mech., 2014, vol. 225, pp. 1013-28.10.1007/s00707-013-1048-2 ↗