Improved Resistance to Stress-Corrosion-Cracking Failures via Optimized Retrogression and Reaging of 7075-T6 Aluminum Sheets
Source abstract
Abstract
The effect of retrogression and reaging (RRA) treatment on the hardness and stress corrosion cracking (SCC) susceptibility of 7075 aluminum alloy sheets was systematically investigated. The material in its as-received T6-temper state was retrogressed at 170 °C, 220 °C, 240 °C, and 380 °C for different durations between 15 seconds and 60 minutes. Subsequent reaging was performed at the T6 aging condition (120 °C for 24 hours). RRA-treated alloys exhibited a better combination of hardness and SCC resistance than the T6-temper state when retrogressed between 170 °C and 240 °C for short durations. However, a retrogression temperature of 380 °C resulted in considerable reduction in both hardness and SCC resistance. Among retrogression temperatures employed, 170 °C provided an optimum combination of hardness and SCC resistance, corresponding to 20 pct improvement in hardness and 85 pct improvement in SCC resistance. In this article, improvements in hardness and SCC resistance of 7075 alloy upon RRA treatment are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. J.P. Immarigeon, R.T. Holt, A.K. Koul, W. Wallace, J.C. Beddoes: Mater. Charac., 1995, vol. 35 (1), pp. 41–6710.1016/1044-5803(95)00066-6 ↗
2. B.M. Cina: U.S. Patent 3,856,584, Dec. 24, 1974
3. J.-C. Lin, H.-L. Liao, W.-D. Jehng, C.-H. Chang, S.-L. Lee: Corros. Sci., 2006, vol. 48 (10), pp. 3139–5610.1016/j.corsci.2005.11.009 ↗
4. A.F. Oliveira Jr., M.C. de Barros, K.R. Cardoso, D.N. Travessa: Mater. Sci. Eng. A, 2004, vol. 379 (1–2), pp. 321–2610.1016/j.msea.2004.02.052 ↗
5. J.S. Robinson: Materialwissenschaft Werkstofftechnik, 2003, vol. 34 (4), pp. 385–9010.1002/mawe.200390080 ↗
6. T.C. Tsai, J.C. Chang, T.H. Chuang: Metall. Mater. Trans. A, 1997, vol. 28, pp. 2113–2110.1007/s11661-997-0168-5 ↗
7. M.U. Islam, W. Wallace: Met. Tech., 1983, vol. 10, pp. 386–9210.1179/030716983803291893 ↗
8. K. Rajan, W. Wallace, J.C. Beddoes: J. Mater. Sci., 1982, vol. 17 (10), pp. 2817–2410.1007/BF00644656 ↗
9. R.J. Bucci, C.J. Warren: J. Aircraft, 2000, vol. 37 (1), pp. 122–2910.2514/2.2571 ↗
10. N.C. Dahn, K. Rajan, W. Wallace: Metall. Trans. A, 1983, vol. 14A, pp. 1843–50
11. J.K. Park, A.J. Ardell: Metal. Trans. A, 1984, vol. 15A, pp. 1531–4310.1007/BF02657792 ↗
12. M. Kanno, I. Araki, Q. Cui: Mater. Sci. Technol., 1984, vol. 10 (7), pp. 599–60310.1179/mst.1994.10.7.599 ↗
13. F. Viana, A.M.P. Pinto, H.M.C. Santos, A.B. Lopes: J. Mater. Process. Technol., 1999, vols. 92–93, pp. 54–5910.1016/S0924-0136(99)00219-8 ↗
14. A. Gazda, M. Warmuzek, W. Wierzchowski: Thermochim. Acta, 1997, vol. 303 (2), pp. 197–20210.1016/S0040-6031(97)00254-2 ↗
15. C. Meng, H. Long, Y. Zheng: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2067–7110.1007/s11661-997-0163-x ↗
16. M.B. Hall, J.W. Martin: Z. Metallkd., 1994, vol. 85 (2), pp. 134–39
17. A. Aran: Z. Metallkd., 1989, vol. 80 (3), pp. 170–72
18. F. Andreatta, H. Terryn, J.H.W. de Witt: Electrochim. Acta, 2004, vol. 49 (17–18), pp. 2851–6210.1016/j.electacta.2004.01.046 ↗
19. Y.L. Wu, F.H. Froes, A. Alvarez, C.G. Li, J. Liu: Mater. Des., 1997, vol. 18 (4–6), pp. 211–15
20. F. Chun, L. Zhi-yi, N. Ai-lin, L. Yan-bin, Z. Su-Min: Trans. Nonferrous Met. Soc. China, 2006, vol. 16 (5), pp. 1163–7010.1016/S1003-6326(06)60395-6 ↗
21. M. Baydogan: Ph.D. Thesis, Institute of Science and Technology, Istanbul Technical University, Istanbul, 2003
22. N. Kamp, I. Sinclair, M.J. Starink: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1125–3610.1007/s11661-002-0214-2 ↗
23. J.K. Park, A.J. Ardell: Mater. Sci. Eng., 1989, vol. 114, pp. 197–20310.1016/0921-5093(89)90859-9 ↗
24. M.O. Speidel: Metall. Trans. A, 1975, vol. 6, pp. 631–5110.1007/BF02672284 ↗
25. T.D. Burleigh: Corrosion, 1991, vol. 47 (2), pp. 89–9810.5006/1.3585235 ↗
26. G. Svenningsen, M.H. Larsen, J.C. Walmsley, J.H. Nordlien, K. Nisancioglu: Corros. Sci., 2006, vol. 48 (6), pp. 1528–4310.1016/j.corsci.2005.05.045 ↗