journal article·2012-11

Impact Toughness of Ultrafine-Grained Interstitial-Free Steel

Onur Saray, Gencaga Purcek, Ibrahim Karaman, Hans J. Maier

Publisher page

Abstract

Impact toughness of an ultrafine-grained (UFG) interstitial-free (IF) steel produced by equal-channel angular extrusion/pressing (ECAE/P) at room temperature was investigated using Charpy impact tests. The UFG IF steel shows an improved combination of strength and impact toughness compared with the corresponding coarse-grained (CG) one. The CG IF steel samples underwent a transition in fracture toughness values with decreasing temperature because of a sudden change in fracture mode from microvoid coalescence (ductile) to cleavage (brittle) fracture. Grain refinement down to the submicron (≈320 nm) levels increased the impact energies in the upper shelf and lower shelf regions, and it considerably decreased the ductile-to-brittle transition temperature (DBTT) from 233 K (−40 °C) for the CG steel to approximately 183 K (−90 °C) for the UFG steel. Also, the sudden drop in DBTT with a small transition range for the CG sample changed to a more gradual decrease in energy for the UFG sample. The improvement in toughness after UFG formation was attributed to the combined effects of grain refinement and delamination and/or separation in the heavily deformed microstructure. Although an obvious change from the ductile fracture by dimples to the brittle fracture by cleavage was recognized at 233 K (−40 °C) for the CG steel, no fully brittle fracture occurred even at 103 K (−170 °C) in the UFG steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. S.-H. Lee, H. Utsunomiya, and T. Sakai: Mater. Trans., 2004, vol. 45A, pp. 2177–81.10.2320/matertrans.45.2177 ↗
2. T. Niendorf, D. Canadinc, H. J. Maier, and I. Karaman: Int. J. Fatigue, 2008, vol. 30, pp. 426–36.10.1016/j.ijfatigue.2007.04.015 ↗
3. G. Purcek, O. Saray, I. Karaman, and H.J. Maier: Metall. Mater. Trans. A, 2012, in press.
4. R. Song, D. Ponge, and D. Raabe: Acta Mater., 2005, vol. 53, pp. 4881–92.10.1016/j.actamat.2005.07.009 ↗
5. G.J. Raab, R.Z. Valiev, T.C. Lowe, and Y.T. Zhu: Mater. Sci. Eng. A, 2004, vol. 382, pp. 30–34.10.1016/j.msea.2004.04.021 ↗
6. K.-T. Park and D.H. Shin: Mater. Sci. Eng. A, 2002, vol. 334, pp. 79–86.10.1016/S0921-5093(01)01796-8 ↗
7. R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1–17.10.1016/j.msea.2006.08.095 ↗
8. T. Niendorf, D. Canadinc, H.J. Maier, and S.G. Sutter: Int. J. Mater. Res., 2006, vol. 97, pp. 1328–36.10.3139/146.101377 ↗
9. T. Niendorf, D. Canadinc, H.J. Maier, and I. Karaman: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1946–55.10.1007/s11661-007-9154-1 ↗
10. T. Niendorf, H.J. Maier, D. Canadinc, and I. Karaman: Mater. Sci. Eng. A, 2009, vol. 503, pp. 160–62.10.1016/j.msea.2008.03.054 ↗
11. N. Tsuji, S. Okuno, Y. Koizumi, and Y. Minamino: Metall. Mater. Trans., 2004, vol. 45A, pp. 2272–81.
12. H.S. Kim, W.S. Ryu, M. Janecek, S.C. Baik, and Y. Estrin: Adv. Eng. Mater., 2005, vol. 7, pp. 43–46.10.1002/adem.200400146 ↗
13. O. Saray, G. Purcek, I. Karaman, T. Neindorf, and H.J. Maier: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6573–83.10.1016/j.msea.2011.05.014 ↗
14. B. Yan, S. Dover, L. Jin, J. Shen, and Y. Huang: Mater. Sci. Forum, 2008, vols. 584–586, pp. 631–36.10.4028/www.scientific.net/MSF.584-586.631 ↗
15. Y.H. Jin, M.Y. Huh, and Y.H. Chung: J. Mater. Sci., 2004, vol. 39, pp. 5311–14.10.1023/B:JMSC.0000039235.76760.04 ↗
16. T. Hanamura, F. Yin, and K. Nagai: ISIJ Int., 2004, vol. 44, pp. 610–17.10.2355/isijinternational.44.610 ↗
17. T. Inoue, F. Yin, Y. Kimura, K. Tsuzaki, and S. Ochiai: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 341–55.10.1007/s11661-009-0093-x ↗
18. M. Calcagnotto, D. Ponge, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7832–40.10.1016/j.msea.2010.08.062 ↗
19. R.E. Barber, T. Dudo, P.B. Yasskin, and K.T. Hartwig: Scripta Mater., 2004, vol. 51, pp. 373–77.10.1016/j.scriptamat.2004.05.022 ↗
20. B.L. Bramfitt and A.O. Benscoter: Metallographer’s Guide: Practices and Procedures for Irons and Steels, ASM International, Materials Park, OH, 2002.10.31399/asm.tb.mgppis.9781627082587 ↗
21. A. Belyakov, Y. Kimura, and K. Tsuzaki: Mater. Sci. Eng. A, 2005, vol. 403, pp. 249–59.10.1016/j.msea.2005.05.057 ↗
22. A.A. Gazder, W. Cao, C.H.J. Davies, and E.V. Pereloma: Mater. Sci. Eng. A, 2008, vol. 497, pp. 341–52.10.1016/j.msea.2008.07.030 ↗
23. T.S. Wang, Z. Li, B. Zhang, X.J. Zhang, J.M. Deng, and F.C. Zhang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2798–2801.10.1016/j.msea.2010.01.072 ↗
24. G. Purcek, O. Saray, O. Kul, I. Karaman, G.G. Yapici, M. Haouaoui, and H.J. Maier: Mater. Sci. Eng. A, 2009, vol. 517, pp. 97–104.10.1016/j.msea.2009.03.054 ↗
25. Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–15.10.1038/nature01133 ↗
26. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893–99.10.1016/S1359-6462(02)00282-8 ↗
27. M. Fujioka, T. Yokota, Y. Adachi, and N. Matsukura: Proc. 2 nd Symp. on Super Metal, Tokyo, Japan, 1999.
28. K. Nagai: J. Mater. Process. Tech., 2001, vol. 117, pp. 329–32.10.1016/S0924-0136(01)00789-0 ↗
29. R. Kaspar, J. Distl, and O. Pawelski: Steel Res., 1988, vol. 59, pp. 421–25.10.1002/srin.198801535 ↗
30. P.D. Hodgson, M.R. Hickson, and R.K. Gibbs: Scripta Mater., 1999, vol. 40, pp. 1179–84.10.1016/S1359-6462(98)00411-4 ↗
31. A. Najafi-Zadeh, J. Jonas, and S. Yue: Metall. Trans. A, 1992, vol. 23A, pp. 2607–17.10.1007/BF02658064 ↗
32. S. Murty, S. Torizuka, K. Nagai, T. Kitai, and Y. Kogo: Scripta Mater., 2005, vol. 53, pp. 763–68.10.1016/j.scriptamat.2005.05.027 ↗
33. S. Nanba, M. Nomura, N. Matsukura, K. Makii, and Y. Shirota: Int. Symp. on Ultrafine Grained Steels (ISUGS 2001), Fukuoka, Japan, 2001.
34. M.-C. Zhao, X.-F. Huang, J.-L. Li, T.-Y. Zeng, Y.-C. Zhao, and A. Atrens: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8157–68.10.1016/j.msea.2011.07.067 ↗
35. B. Hwang, Y.G. Kim, S. Lee, Y.M. Kim, N.J. Kim, and J.Y. Yoo: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2107–14.10.1007/s11661-005-0331-9 ↗
36. S.Y. Shin, B. Hwang, S. Kim, and S. Lee: Mater. Sci. Eng. A, 2006, vol. 429, pp. 196–204.10.1016/j.msea.2006.05.086 ↗
37. S. Kim, S. Lee, Y.R. Im, H.C. Lee, Y.J. Oh, and J.H. Hong: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 903–11.10.1007/s11661-001-0347-8 ↗
38. H.D: Acta Metall. Mater., 1960, vol. 8, pp. 11–18.10.1016/0001-6160(60)90133-4 ↗
39. R.O. Ritchie, J.F. Knott, and J. Rice: J. Mech. Phys. Solids, 1973, vol. 21, pp. 395–410.10.1016/0022-5096(73)90008-2 ↗
40. S.Q. Cao, J.X. Zhang, J.S. Wu, L. Wang, and J.G. Chen: Mater. Sci. Eng. A, 2005, vol. 392, pp. 203–08.10.1016/j.msea.2004.09.024 ↗
41. H. Kurishita, T. Yamamoto, M. Narui, H. Suwarno, T. Yoshitake, Y. Yano, M. Yamazaki, and H. Matsui: J. Nucl. Mater., 2004, vol. 329, pp. 1107–12.10.1016/j.jnucmat.2004.04.307 ↗
42. B. Bramfitt and A. Marder: Metall. Trans. A, 1977, vol. 8A, pp. 1263–73.10.1007/BF02643841 ↗
43. T. Hashimoto, T. Sawamura, and H. Ohtani: J. Iron Steel Int., 1979, vol. 65, pp. 1425–33.10.2355/tetsutohagane1955.65.9_1425 ↗
44. S. Matsuda, Y. Kawashima, S. Sekiguchi, and M. Okamoto: J. Iron Steel Int., 1982, vol. 68, pp. 435–43.10.2355/tetsutohagane1955.68.3_435 ↗
45. P. Shanmugam and S. Pathak: Eng Fract. Mech., 1996, vol. 53, pp. 991–1005.10.1016/0013-7944(95)00159-X ↗
46. R. Schofield, G. Rowntree, N. Sarma, and R. Weiner: Met. Technol., 1974, vol. 1, pp. 325–31.10.1179/030716974803288112 ↗
47. A. McEvily and R. Rush: ASM Trans., 1962, vol. 55, p. 654.