journal article·2012-07

Enhancement of Upper Shelf Energy through Delamination Fracture in 0.05 pct P Doped High-Strength Steel

Meysam Jafari, Yuuji Kimura, Kaneaki Tsuzaki

Publisher page

Abstract

An ultrafine elongated grain (UFEG) structure with strong 〈110〉//rolling direction (RD) fiber deformation texture was produced by warm-caliber rolling at 773 K (500 °C) and final tempering at 823 K (550 °C), namely tempforming in the 1200 MPa-class, medium-carbon, low-alloy steel with phosphorus (P) content of 0.053 wt pct. Charpy impact tests and tensile tests were performed at a temperature range of 77 K (–196 °C) to 623 K (350 °C) on the tempformed (TF) samples along with a conventional quenched and tempered (QT) samples. The QT structure showed a low upper shelf energy of 70 J and a high ductile-to-brittle transition temperature (DBTT) of 373 K (100 °C) as a result of P segregation and intergranular fracture. A remarkable increase in the upper shelf energy to 150 J from 70 J and a low DBTT of approximately 103 K (–170 °C) were obtained in the UFEG structure. P segregation embrittlement disappeared completely in the UFEG structure, and ductile fracture on the planes normal to RD along with delamination fracture on the planes along RD were observed at a temperature range of 123 K (–150 °C) to 423 K (150 °C). The enhanced delamination occurred because of the microstructural anisotropy of the UFEG structure, a strong 〈110〉//RD fiber deformation texture, and interfaces (i.e. ferrite grain boundaries and cementite particles-ferrite matrix interfaces) weakened by P segregation as feasible crack propagation paths. We studied the delamination (crack-arrester-type) fracture in 0.053 pct P doped high-strength steel along with upper shelf energy and DBTT obtained from the UFEG structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. S.H. Song, J. Wu, L.Q. Weng, and Z.X. Yuan: Mater. Sci. Eng. A, 2008, vol. 497, p. 524.10.1016/j.msea.2008.07.036 ↗
2. R.A. Mulford, C.J. McMahon, D.P. Pope, and H.C. Feng: Metall. Trans. A, 1976, vol. 7A, p. 1183.10.1007/BF02656602 ↗
3. M. Mackenbrock and H.J. Grabke: Mater. Sci. Technol., 1992, vol. 8, p. 541.10.1179/mst.1992.8.6.541 ↗
4. J.D. Embury, N.J. Petch, A.E. Wraith, and E.S. Wright: Trans. TMS-AIME, 1967, vol. 239, p. 114.
5. H. Ohtani and C.J. McMahon Jr.: Acta Metall., 1976, vol. 23, p. 377.10.1016/0001-6160(75)90131-5 ↗
6. T. Maki, K. Tsuzaki, and I. Tamura: Trans. ISIJ, 1980, vol. 20, p. 207.10.2355/isijinternational1966.20.207 ↗
7. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, p. 1789.10.1016/S1359-6454(02)00577-3 ↗
8. A. Dronhofer, J. Pesicka, A. Dlouhy, and G. Eggeler: Z. Metalkd., 2003, vol. 94, p. 511.10.3139/146.030511 ↗
9. S. Takaki, K. Kawasaki, and Y. Kimura: J. Mater. Process. Tech., 2001, vol. 11, p. 359.10.1016/S0924-0136(01)00797-X ↗
10. A. Ohmori, S. Torizuka, and K. Nagai: Tetsu-to-Hagané, 2003, vol. 89, p. 1063.
11. R. Song, D. Ponge, and D. Raabe: Acta Mater., 2005, vol. 53, p. 4881.10.1016/j.actamat.2005.07.009 ↗
12. S. Torizuka, A. Ohmori, S.V.S. Narayana Murty, and K. Nagai: Scripta Mater., 2006, vol. 54, p. 563.10.1016/j.scriptamat.2005.10.055 ↗
13. T. Hanamura, M.C. Zhao, H. Qiu, F. Yin, and K. Nagai: Tetsu-to-Hagané, 2009, vol. 95, p. 71.10.2355/tetsutohagane.95.71 ↗
14. N. Muraki, T. Takayama, M. Arai, Y. Kamada, M. Uno, K. Orita, T. Masaki, Y. Arimi, and A. Mutagami: Tetsu-to-Hagané, 1997, vol. 83, p. 215.10.2355/tetsutohagane1955.83.3_215 ↗
15. N. Tsuji, S. Okuno, Y. Koizumi, and Y. Minamino: Mater. Trans., 2004, vol. 45, p. 2272.10.2320/matertrans.45.2272 ↗
16. S.J. Jia, P. Qu, Y. Weng, J.B. Zhang, H.J. Chen, and Q.Y. Liu: Iron and Steel, 2005, vol. 40, p. 59.
17. S. Matsuda, Y. Kawashima, S. Sekiguchi, and M. Okamoto: Tetsu-to- Hagané, 1982, vol. 68, p. 435.10.2355/tetsutohagane1955.68.3_435 ↗
18. B. Mintz and W.B. Morrison: Mater. Sci. Technol., 2007, vol. 23, p. 1346.10.1179/174328407X168801 ↗
19. Y. Kimura, T. Inoue, F. Yin, O. Sitdikov, and K. Tsuzaki: Scripta Mater., 2007, vol. 57, p. 465.10.1016/j.scriptamat.2007.05.039 ↗
20. Y. Kimura, T. Inoue, F. Yin, and K. Tsuzaki: Science, 2008, vol. 320, p. 1057.10.1126/science.1156084 ↗
21. Y. Kimura, T. Inoue, F. Yin, and K. Tsuzaki: ISIJ Int., 2010, vol. 50, p. 152.10.2355/isijinternational.50.152 ↗
22. T. Inoue, F. Yin, Y. Kimura, K. Tsuzaki, and S. Ochiai: Metall. Mater. Trans. A, 2009, vol. 41A, p. 341.
23. P. Shanmugam and S.D. Pathak: Eng. Fract. Mech., 1996, vol. 53, p. 991.10.1016/0013-7944(95)00159-X ↗
24. W. Zhou and N.L. Loh: Scripta Mater., 1996, vol. 34, p. 633.10.1016/1359-6462(95)00564-1 ↗
25. K.T. Venkateswara Rao, W. Yu, and R.O. Ritchie: Metall. Trans. A, 1989, vol. 20A, p. 485.10.1007/BF02653929 ↗
26. S. Ochiai and K. Osamura: J. Mater. Sci., 1988, vol. 23, p. 886.10.1007/BF01153984 ↗
27. S.P. Joshi and C.T. Sun: J. Compos. Mater., 1985, vol. 19, p. 51.10.1177/002199838501900104 ↗
28. D.W. Kum, T. Oyama, J. Wadsworth, and O.D. Sherby: J. Mech. Phys., 1983, vol. 31, p. 173.10.1016/0022-5096(83)90049-2 ↗
29. A.J. McEvily Jr. and R.H. Bush: Trans. Am. Soc. Met., 1962, vol. 55, p. 654.
30. C.M. Yen and C.A. Stickels: Metall. Trans., 1970, vol. 1, p. 3037.10.1007/BF03038417 ↗
31. J.W. Morris Jr., C.S. Lee, and Z. Guo: ISIJ Int. 2003, vol. 43, p. 410.10.2355/isijinternational.43.410 ↗
32. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, Columbus, OH, 1986, pp. 477-8.
33. A.W. Thompson and M.F. Ashby: Scripta Metall., 1984, vol. 18, p. 127.10.1016/0036-9748(84)90489-7 ↗
34. H. Qiu, H. Mori, M. Enoki, and T. Kishi: ISIJ Int., 1999, vol. 39, p. 352.10.2355/isijinternational.39.352 ↗
35. H. Qiu, H. Mori, M. Enoki, and T. Kishi: ISIJ Int., 1999, vol. 39, p. 358.10.2355/isijinternational.39.358 ↗
36. H. Qiu, M. Enoki, Y. Kawaguchi, and T. Kishi: Eng. Fract. Mech., 2003, vol. 70, p. 589.10.1016/S0013-7944(02)00080-2 ↗
37. H. Qiu, M. Enoki, Y. Kawaguchi, and T. Kishi: Eng. Fract. Mech., 2003, vol. 70, p. 599.10.1016/S0013-7944(02)00079-6 ↗
38. K. Srinivasan, Y. Huang, O. Kolednik, and T. Siegmund: J. Mech. Phys. Sol., 2008, vol. 56, p. 2707.10.1016/j.jmps.2008.02.006 ↗
39. M. Jafari, Y. Kimura, Y. Nie, and K. Tsuzaki: ISIJ Int., 2010, vol. 50, pp. 1660–65.10.2355/isijinternational.50.1660 ↗