Comparison of the Microstructure, Tensile, and Creep Behavior for Ti-22Al-26Nb (At. Pct) and Ti-22Al-26Nb-5B (At. Pct)
Source abstract
Abstract
The effect of the addition of 5 at. pct boron on the microstructure and creep behavior of a nominally Ti-22Al-26Nb (at. pct) alloy was investigated. The boron-modified alloy contained boride needles enriched in titanium and niobium, and because to these borides, this material was considered to be a discontinuously reinforced metal matrix composite. These needle-shaped borides made up to 2 pct of the volume and were up to 158-μm long and 22-μm wide. The effect of boron on the mechanical properties was evaluated through in-situ creep testing and tensile testing at room temperature (RT) and 650 °C. Overall, the addition of 5 at. pct boron proved to be detrimental to the tensile and creep behavior. The composite exhibited a brittle failure and lower elongations-to-failure than the monolithic material. The in-situ tensile and creep experiments revealed that the deformation process initiated in the boride needles, which cracked extensively, and significantly greater primary creep strains and creep rates were exhibited by the composite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Tamirisakandala S., Bhat R.B., Tiley J.S., Miracle D.B. (2005) Scripta Mater. 53: 1421–2610.1016/j.scriptamat.2005.08.020 ↗
2. Gorsse S., Miracle D.B. (2006) Acta Mater. 51:2427–4210.1016/S1359-6454(02)00510-4 ↗
3. Boehlert C.J., Cowen C.J., Tamirisakandala S., McEldowney D.J., Miracle D.B. (2006) Scripta Mater. 55:465–6810.1016/j.scriptamat.2006.05.008 ↗
4. Boehlert C.J., Majumdar B.S., Seetharaman V., Miracle D.B. (1999) Metall. Trans. A 30A: 2305–2310.1007/s11661-999-0240-4 ↗
5. Cowen C.J., Boehlert C.J. (2006) Phil. Mag. 86: 99–12410.1080/14786430500156773 ↗
6. Kestner-Weykamp H.T., Ward C.W., Broderick T.F., Kaufman M.J. (1989) Scripta Metall. 23: 1697–170210.1016/0036-9748(89)90345-1 ↗
7. Bendersky L.A., Boettinger W.J., Roytburd A. (1991) Acta Metall. Mater. 39: 1959–6910.1016/0956-7151(91)90165-W ↗
8. C.G. Rhodes, J.A. Graves, P.R. Smith, and M.R. James: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 45-52.
9. Mendiratta M.G., Lipsitt H.A. (1980) J. Mater. Sci. 15:298510.1007/BF00550365 ↗
10. Malakondaiah G., Rao P.R. (1981) Acta Metall. 29:126310.1016/0001-6160(81)90017-1 ↗
11. Mishra R.S., Banerjee D. (1990) Mater. Sci. Eng. A. 130:151–6410.1016/0921-5093(90)90056-9 ↗
12. H. Conrad, M. Doner, and B. DeMeester: in Titanium Science and Technology, R.I. Jaffee and H.M. Burte, eds., Plenum, New York, NY, 1973, p. 969.
13. Nandy T.K., Mishra R.S., Banerjee D. (1993) Scripta Metall. Mater. 28: 569–7410.1016/0956-716X(93)90198-2 ↗
14. Nandy T.K., Banerjee D. (2000) Intermetallics 8: 915–2810.1016/S0966-9795(00)00059-5 ↗
15. Boehlert C.J., Miracle D.B. (1999) Metall. Mater. Trans. A 30A:2349–6710.1007/s11661-999-0244-0 ↗
16. Smith P.R., Rosenberger A., Shepard M.J., Wheeler R. (2000) J. Mater. Sci. 35: 3169–7910.1023/A:1004833629778 ↗
17. Smith P.R., Rosenberger A., Shepard M.J. (1999) Scripta Mater. 41: 221–2810.1016/S1359-6462(99)00162-1 ↗
18. Rhodes C.G., Smith P.R., Hanusiak W.H., Shepard M.J. (2000) Metall. Mater. Trans. A 31:2931–4110.1007/BF02830346 ↗
19. R.G. Rowe: in Titanium ’92 Science and Technology, F.H. Froes and I.L. Caplan, eds., TMS, Warrendale, PA, 1993, p. 343
20. R.G. Rowe and M. Larsen: in Titanium ‘95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., The University Press, Cambridge, United Kingdom, 1996, pp. 364-71
21. Boehlert C.J., Miracle D.B. (1999) Metall. Mater. Trans. A 30A: 2349–6710.1007/s11661-999-0244-0 ↗
22. C.J. Boehlert, B.S. Majumdar, V. Seetharaman, D.B. Miracle, and R. Wheeler: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1997, pp. 795-804
23. Tang F., Nakazawa S., Hagiwara M. (2001) Mater. Sci. Eng. A 315: 147–5210.1016/S0921-5093(01)01155-8 ↗
24. Hagiwara M., Emura S., Araoka A. (2003) Mater. Sci. Forum 426–432: 1715–2010.4028/www.scientific.net/MSF.426-432.1715 ↗
25. Yang S.J., Emura S., Hagiwara M., Nam S.W. (2003) Scripta Mater. 49: 897–90210.1016/S1359-6462(03)00435-4 ↗
26. Hagiwara M., Emura S., Araoka A., Kong B.O., Tang F. (2003) Met. Mater. Int. 9: 265–7210.1007/BF03027045 ↗
27. Emura S., Yang S.J., Hagiwara M. (2004) Metall. Mater. Trans. A 35A: 2971–7910.1007/s11661-004-0244-z ↗
28. C.J. Cowen and C.J. Boehlert: Advanced Materials Research, Trans Tech Publications Ltd, Switzerland, Part 1, 2007, vol. 15–17, pp. 976-981.10.4028/www.scientific.net/AMR.15-17.976 ↗
29. Standard Test Methods for Determining Average Grain Size, ASTM Designation E112-96e3, ASTM, West Conshohocken, PA
30. Panda K.B. Ravi Chandran K.S. (2006) Acta Mater. 54: 1641–5710.1016/j.actamat.2005.12.003 ↗
31. D.R. Trinkle: Scripta Materialia, 2007, vol. 56, pp. 273–276.10.1016/j.scriptamat.2006.10.030 ↗
32. C.J. Cowen, PhD Thesis, Michigan State University, 2006.
33. Boehlert C.J. (2001) Metall. Mater. Trans. A 32A: 1977–8810.1007/s11661-001-0010-4 ↗
34. Gogia A.K., Nandy T.K., Muraleedharan K., Banerjee D. (1992) Mater. Sci. Eng. A 159: 73–8610.1016/0921-5093(92)90400-U ↗
35. Boehlert C.J., Majumdar B.S., Eylon D. (1997) Key Eng. Mater. 127–131: 843–5010.4028/www.scientific.net/KEM.127-131.843 ↗
36. C.F. Yolton and J.H. Moll: in Titanium ‘95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., The University Press, Cambridge, United Kingdom, 1996, p. 2755
37. M. Hagiwara and S. Emura: Workshop on Titanium Alloys Modified with Boron, Dayton, OH, Oct. 11–13, 2005