journal article·2011-05

Microstructural Evolution and Bonding Behavior during Transient Liquid-Phase Bonding of a Duplex Stainless Steel using two Different Ni-B-Based Filler Materials

Xinjian Yuan, Myung Bok Kim, Chung Yun Kang

Publisher page

Abstract

Microstructural evolution and bonding behavior of transient liquid-phase (TLP) bonded joint for a duplex stainless steel using MBF-30 (Ni-4.5Si-3.2B [wt pct]) and MBF-50 (Ni-7.5Si-1.4B-18.5Cr [wt pct]) were investigated. Using MBF-30, the microstructure of the athermally solidified zone was dependent on B diffusion at 1333.15 K (1060 °C). Ni3B and a supersaturated γ-Ni phase were observed in this zone. BN appeared in the bonding-affected zone. However, using MBF-50, the influences of base metal alloying elements, particularly N and Cr as well as Si in the filler material, on the bond microstructure development were more pronounced at 1448.15 K (1175 °C). BN and (Cr, Ni)3Si phase were present in the bond centerline. The formation of BN precipitates in the bonding-affected zone was suppressed. A significant deviation in the isothermal solidification rate from the conventional TLP bonding diffusion models was observed in the joints prepared at 1448.15 K (1175 °C) using MBF-50.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Anodic Oxide Films and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. T.I. Khan, N. Orhan, and M. Eroglu: Mater. Sci. Technol., 2002, vol. 18, pp. 396-400.10.1179/026708302225001697 ↗
2. L.H. Chiu, W.C. Hsieh, and C.H. Wu: Mater. Sci. Eng., 2003, vol. 354A, pp. 82-91.10.1016/S0921-5093(02)00911-5 ↗
3. X.J. Yuan, C.Y. Kang, and M.B. Kim: Mater. Charact., 2009, vol. 60, pp. 923-31.10.1016/j.matchar.2009.03.004 ↗
4. X.J. Yuan, M.B. Kim, and C.Y. Kang: Mater. Charact., 2009, vol. 60, pp. 1289-97.10.1016/j.matchar.2009.05.012 ↗
5. X.J. Yuan, M.B. Kim, and C.Y. Kang: Mater. Sci. Technol., in press.
6. S.D. Duvall, W.A. Owczarski, and D.F. Paulonis: Weld. J., 1974, vol. 53, pp. 203-14.
7. G. Humpston and D.M. Jacobson: Principles of Soldering and Brazing, ASM International, Materials Park, OH, 1993, pp. 128-32.
8. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi: Sci. Technol.Weld. Join., 2004, vol. 9, no. 3, pp. 209-20.10.1179/136217104225012175 ↗
9. C.Y. Su, C.P. Chou, W.J. Chang, and M.H. Liu: J. Mater. Sci. Perform., 2000, vol. 9, pp. 663-68.10.1361/105994900770345539 ↗
10. J.E. Ramirez and S. Liu: Weld. J., 1992, vol. 71, pp. 365s-375s.
11. W.D. MacDonald and T.W. Eagar: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 315-25.10.1007/s11661-998-0183-1 ↗
12. I. Tuah-Poku, M. Dollar, and T.B. Massalski: Metall. Trans. A, 1988, vol. 19A, pp. 675-86.10.1007/BF02649282 ↗
13. Y. Zhou, W.F. Gale, and T.H. North: Int. Mater. Rev., 1995, vol. 40, no. 5, pp. 181-96.10.1179/imr.1995.40.5.181 ↗
14. C.W. Sinclair, G.R. Purdy, and J.E. Morral: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1187-92.10.1007/s11661-000-0114-2 ↗
15. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi: Sci. Technol. Weld. Join., 2004, vol. 9, no. 6, pp. 532-40.10.1179/174329304X8702 ↗
16. W.F. Gale and E.R. Wallach: Metall. Trans. A, 1991, vol. 22A, pp. 2451-57.10.1007/BF02665011 ↗
17. D.M. Turriff and S.F. Corbin: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 28-38.10.1007/s11661-007-9388-y ↗
18. M.L. Kuntz, S.F. Corbin, and Y. Zhou: Acta Mater., 2005, vol. 53, pp. 3071-82.10.1016/j.actamat.2005.03.018 ↗
19. M. Pouranvari, A. Ekrami, and A.H. Kokabi: J. Alloys Compd., 2009, vol. 469, pp. 270-75.10.1016/j.jallcom.2008.01.101 ↗
20. The Japan Institute of Metals: Metals Data Book, The Japan Institute of Metals, Maruzen, Tokyo, 1993.
21. J.-D. Schöbel and H.H. Stadelmaier: Z. Metallkde., 1965, vol. 56, no. 12, pp. 856-59.
22. T.B. Massalski: Binary Alloy Phase Diagrams, ASM, Metals Park, OH, 1986, pp. 366-71.
23. W.F. Gale and E.R. Wallach: Mater. Sci. Technol., 1991, vol. 7, pp. 1143-48.10.1179/mst.1991.7.12.1143 ↗
24. O.A. Idowu, N.L. Richards, and M.C. Chaturvedi: Mater. Sci. Eng., 2005, vol. 397A, pp. 98-112.10.1016/j.msea.2005.01.055 ↗
25. M.A. Arafin, M. Medraj, D.P. Turner, and P. Bocher: Mater. Chem. Phys., 2007, vol. 106, pp. 109-19.10.1016/j.matchemphys.2007.05.049 ↗
26. K. Tokoro, N.P. Wikstrom, O.A. Ojo, and M.C. Chaturvedi: Mater. Sci. Eng., 2008, vol. 477A, pp. 311-18.10.1016/j.msea.2007.05.069 ↗
27. M. Pouranvari, A. Ekrami, and A.H. Kokabi: J. Alloys Compd., 2008, vol. 461, 641-47.10.1016/j.jallcom.2007.07.108 ↗
28. ASM Handbook: Alloy Phase Diagram, vol. 3, ASM, Materials Park, OH, 1992, pp. 426–27.
29. B. Predel: Physical Chemistry: Phase Equilibria Crystallographic Data and Values of Thermodynamic Properties of Binary Alloys, Springer-Verlag/Heidelberg, Berlin, Germany, 1992, p. 15.
30. N.D. Luozzo, M. Fontana, and B. Arcondo: J. Mater. Sci., 2007, vol. 42, pp. 4044-50.10.1007/s10853-006-0190-9 ↗
31. E.A. Moelwyn-Hughes: The Kinetics of Reaction in Solution, Clarredon Press, Oxford, UK, 1947.
32. K. Nishimoto, K. Saida, D. Kim, and Y. Nakao: ISIJ Int., 1995, vol. 35, pp. 1298-306.10.2355/isijinternational.35.1298 ↗
33. J.E. Ramirez and S. Liu: Weld. J., 1992, vol. 71, pp. 365s-375s.
34. A. Schnell: Ph.D. Thesis, Institut des Matériaux, Nantes, France, 2004.
35. A. Schnell and D. Graf: Proc. 6th Int. Parsons Turbine Conf., 2003, pp. 971–85.
36. A. Sakamoto, C. Fujiwara, T. Hattori, and S. Sakai: Weld. J., 1989, vol. 68, pp. 63-71.
37. J. Crank: The Mathematics of Diffusion, 2nd ed., Clarendon Press, Oxford, UK, 1975.
38. N.P. Wikstrom, O.A. Ojo, and M.C. Chaturvedi: Mater. Sci. Eng., 2006, vol. 417A, pp. 299-306.10.1016/j.msea.2005.10.056 ↗
39. N.P. Wikstrom, A.T. Egbewande, and O.A. Ojo: J. Alloys Compd., 2008, vol. 460, pp. 379-85.10.1016/j.jallcom.2007.06.066 ↗
40. A.T. Egbewande, C. Chukwukaeme, and O.A. Ojo: Mater. Charact., 2008, vol. 59, pp. 1051-58.10.1016/j.matchar.2007.08.023 ↗
41. M. Mosallaee, A. Ekrami, K. Ohsasa, and K. Matsuura: Metall. Mater. Trans., 2008, vol. 39A, pp. 2389-2402.10.1007/s11661-008-9588-0 ↗
42. O.A. Ojo and M.M. Abdelfatah: Mater. Sci. Technol., 2008, vol. 24, 739-43.10.1179/174328408X281958 ↗
43. R.F. Sekerta: Physical Metallurgy of Metals Joining, TMS-AIME, St Louis, MO, 1980.
44. A. LeBlanc and R. Mevrel: High Temperature Materials for Power Engineering Conference, Liege, Belgium, 1990, pp. 1451-60.