Determination of Strain during Hot Tearing by Image Correlation
Source abstract
Abstract
The evolution of strain and strain at the onset of localization resulting in a hot tear has been determined for alloys AA6111, AA3104, CA31218, and Al-0.5 wt pct Cu during solidification. A bar constrained at both ends was solidified with a window above the hot spot region to allow observation of hot tear formation and growth. A high-resolution camera was used to capture images of the surface during solidification. In addition, a thermocouple cast into the sample was used to acquire temperature data in proximity to the hot tear. The images were analyzed using digital image correlation software to measure the evolution of displacement and strain based on tracking the motion of discrete features on the as-cast surface of the sample. Strain data was determined starting from the point immediately after solidification shrinkage ends (the metal pulls away from the glass) and finishing when the first sign of a crack or hot tear is visible to the eye. The minimum strain at which strain localization occurs was found to be > 0.0069 in AA6111, > 0.0123 for AA3104, > 0.0047 for CA31218, and > 0.0021 for Al-0.5 pct Cu.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. G.K. Sigworth: Trans. Am. Foundrymen’s Soc., 1996, vol. 104, pp. 1053–62
2. J. Langlais and J.E. Gruzleski: Mater. Sci. Forum (Switzerland), 2000, vols. 331–337 (1), pp. 167–7210.4028/www.scientific.net/MSF.331-337.167 ↗
3. F. Paray, B. Kulunk, and J.E. Gruzleski: Int. J. Cast Met. Res. (UK), 2000, vol. 13 (3), pp. 147–5910.1080/13640461.2000.11819397 ↗
4. J.A. Spittle, A.A. Cushway: Met. Technol., 1983, vol. 10 (1), pp. 6–1310.1179/030716983803291226 ↗
5. S. Instone, D.H. StJohn, and J. Grandfield: Int. J. Cast Met. Res. (UK), 2000, vol. 12(6), pp. 441–5610.1080/13640461.2000.11819381 ↗
6. D. Warrington, D.G. McCartney: Cast Met., 1989, vol. 2 (3), pp. 134–4310.1080/09534962.1989.11818994 ↗
7. A.R.E. Singer, S.A. Cottrell: J. Inst. Met., 1946, vol. 73 (5), p. 273
8. P.H. Jennings, A.R.E. Singer, W.I. Pumphrey: J. Inst. Met., 1947, vol. 74, pp. 227–48
9. Y.F. Guven, J.D. Hunt: Cast Met., 1988, vol. 1 (2), pp. 104–1110.1080/09534962.1988.11818955 ↗
10. D. Warrington, D.G. McCartney: Cast Met., 1991, vol. 3 (4), pp. 202–0810.1080/09534962.1990.11819040 ↗
11. T.W. Clyne, G.J. Davies: Br. Foundryman, 1975, vol. 68 (9), pp. 238–44
12. T.W. Clyne, G.J. Davies: Br. Foundryman, 1981, vol. 74 (4), pp. 65–73
13. H. Chadwick: Cast Met., 1991, vol. 4 (1), pp. 43–4910.1080/09534962.1991.11819054 ↗
14. I.I. Novikov, O.E. Grushko: Mater. Sci. Technol., 1995, vol. 11 (9), pp. 926–3210.1179/mst.1995.11.9.926 ↗
15. S. Instone, D. StJohn, J. Grandfield: Materials 98, Wollongong University Press, University of Wollongong, Wollongong, Australia, 1998, pp. 125–30
16. I.I. Novikov: Goryachelomkost Tsvetnykh Metallov i Splavov (Hot Shortness of Nonferrous Metals and Alloys), Nauka, Moscow, 1966, p. 299 (in Russian)
17. J.A. Spittle, S.G.R. Brown, J.D. James, R.W. Evans: Physical Simulation of Casting, Hot Rolling and Welding, National Research Institute for Metals (Japan), Tsukuba, Japan, 1997, pp. 81–91
18. L.J. Colley, M.A. Wells, D.M. Maijer: Mater. Sci. Eng., A, 2004, vol. 386, pp. 140–4810.1016/j.msea.2004.07.019 ↗
19. W.M. van Haaften, W.H. Kool, and L. Katgerman: J. Mater. Eng. Perform. (USA), 2002, vol. 11 (5), pp. 537–4310.1361/105994902770343791 ↗
20. A.K. Dahle, S. Instone, T. Sumitomo: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 105–1310.1007/s11661-003-0212-z ↗
21. C. Davidson, D. Viano, L. Lu, and D.H. StJohn: Shape Casting: The John Campbell Symp., TMS Annual Meeting, San Francisco, CA, 2005, TMS, Warrendale, PA, 2005, pp. 175–82
22. Correlated Solutions, Columbia, SC, USA, 2005