journal article·2005-03

On the development and investigation of quaternary Pt-based superalloys with Ni additions

M. Wenderoth, U. Glatzel, R. Völkl, L. A. Cornish, R. Süss, S. Vorberg, B. Fischer

Publisher page

Abstract

The objective of this work is to mimic the microstructure and strengthening mechanisms of Ni-based superalloys in a new group of high-temperature alloys based on the system Pt-Al. The elements Cr and Ni were chosen as further alloying components. Having a face-centered cubic (fcc) crystal structure with an Ll2-ordered and coherently embedded phase, these new alloys should increase creep and corrosion resistance beyond Ni-based superalloys. After arc melting and heat treatment, the alloys were investigated by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD). In the aged condition, the alloy composition 13 at. pct Al, 3 at. pct Cr, 7 at. pct Ni, and balance Pt showed the most promising microstructure with cubical precipitates, 30 pct precipitate volume fraction, and a lattice misfit of about −0.1 pct at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. R. Süss, D. Freund, R. Völkl, B. Fischer, P.J. Hill, P. Ellis, and I.M. Wolff: Mater. Sci. Eng. A, 2002, vol. 338, pp. 133–41.10.1016/S0921-5093(02)00068-0 ↗
2. Y. Yamabe, Y. Koizumi, H. Murakami, Y. Ro, T. Maruko, and H. Harada: Scripta Mater., 1996, vol. 35 (2), pp. 211–15.10.1016/1359-6462(96)00109-1 ↗
3. Y. Yamabe-Mitarai, Y. Koizumi, H. Murakami, Y. Ro, T. Maruko, and H. Harada: Scripta Mater., 1997, vol. 36 (4), pp. 393–98.10.1016/S1359-6462(96)00408-3 ↗
4. Y.F. Gu, Y. Yamabe-Mitarai, Y. Ro, and H. Harada: Scripta Mater., 1999, vol. 40 (11), pp. 1313–19.10.1016/S1359-6462(99)00065-2 ↗
5. Y.F. Gu, Y. Yamabe-Mitarai, Y. Ro, T. Yokokawa, and H. Harada: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2629–39.
6. Y.F. Gu, Y. Yamabe-Mitarai, Y. Ro, T. Yokokawa, and H. Harada: Scripta Mater., 1998, vol. 39 (6), pp. 723–28.10.1016/S1359-6462(98)00184-5 ↗
7. Y. Yamabe-Mitarai and H. Aoki: J. Alloys Compounds, 2003, vol. 359, pp. 143–52.10.1016/S0925-8388(03)00186-5 ↗
8. Y. Yamabe-Mitarai and H. Aoki: Mater. Sci. Eng. A, 2003, vol. 362, pp. 152–59.10.1016/S0921-5093(03)00575-6 ↗
9. Y.F. Gu, Y. Yamabe-Mitarai, S. Nakazawa, and H. Harada: Scripta Mater., 2002, vol. 46, pp. 137–42.10.1016/S1359-6462(01)01210-6 ↗
10. Y.F. Gu, Y. Yamabe-Mitarai, and H. Harada: Intermetallics, 2003, vol. 11, pp. 57–62.10.1016/S0966-9795(02)00165-6 ↗
11. L.A. Cornish, B. Fischer, and R. Völkl: MRS Bull., 2003, vol. 28 (9), pp. 632–38.10.1557/mrs2003.190 ↗
12. P.J. Hill, P. Ellis, L.A. Cornish, M.J. Witcomb, and I.M. Wolff: Proc. High Temperature Corrosion and Protection, Hokkaido, Japan, Sept. 17–22, 2000, pp. 185–90.
13. R. Süss, P.J. Hill, P. Ellis, and L.A. Cornish: Proc. 40th Ann. Conf. of the Microscopy Society of Southern Africa, Johannesburg, South Africa, Dec. 5–7, 2001.
14. P.J. Hill, Y. Yamabe-Mitarai, H. Murakami, L.A. Cornish, M.J. Witcomb, I.M. Wolff, and H. Harada: Proc. 3rd Int. Symp. on Structural Intermetallics, Jackson Hole, WY, Sept. 23–27, 2001, pp. 527–33.
15. P.J. Hill, N. Adams, T. Biggs, P. Ellis, J. Hohls, S. Taylor, and I.M. Wolff: Mater. Sci. Eng., 2002, vol. 329, pp. 295–304.10.1016/S0921-5093(01)01577-5 ↗
16. P.J. Hill, G.B. Fairbank, and L.A. Cornish: JOM, 2001, vol. 53, pp. 19–20.10.1007/s11837-001-0049-0 ↗
17. L.A. Cornish, J. Hohls, P.J. Hill, S. Prins, R. Süss, and D.N. Compton: J. Min. Met., 2002, vol. 38B (3–4), pp. 197–204.10.2298/JMMB0204197C ↗
18. P.J. Hill, Y. Yamabe-Mitarai, and I.M. Wolff: Scripta Mater., 2001, vol. 44 (1), pp. 43–48.10.1016/S1359-6462(00)00559-5 ↗
19. I.M. Wolff and P.J. Hill: Platinum Met. Rev., 2000, vol. 44 (4), pp. 158–66.10.1595/003214000X444158166 ↗
20. S. Vorberg, M. Wenderoth, B. Fischer, U. Glatzel, and R. Völkl: JOM, 2004, vol. 56 (9), pp. 40–43.10.1007/s11837-004-0199-y ↗
21. Y. Oya, Y. Mishima, and T. Suzuki: Z. Metallkd., 1987, vol. 78 (7), pp. 485–90.
22. T.B. Massalski: Binary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1990.
23. D.M. Wee, O. Noguchi, Y. Oya, and T. Suzuki: Trans. JIM, 1980, vol. 21, pp. 237–47.10.2320/matertrans1960.21.237 ↗
24. M. Hüller, M. Wenderoth, S. Vorberg, B. Fischer, U. Glatzel, and R. Völkl: Metall. Mater. Trans. A, in press.
25. J.E. Hilliard and J.W. Cahn: Trans. TMS, 1961, vol. 221 (1–3), pp. 344–52.
26. L. Reimer: in Scanning Electron Microscopy, 2nd ed., P.W. Hawkes, ed., Springer-Verlag, New York, NY, 1998, pp. 210–12.10.1007/978-3-540-38967-5 ↗
27. G.L. Erickson: JOM, 1995, vol. 4, pp. 36–39.10.1007/BF03221147 ↗
28. K. Schubert: Kristallstrukturen Zweikomponentiger Phasen, 1st ed., Springer-Verlag OHG, Berlin, 1964, p. 30.10.1007/978-3-642-94904-3 ↗
29. Y.Y. Qiu: J. Alloys Compounds, 1996, vol. 232, pp. 254–63.10.1016/0925-8388(95)01914-6 ↗
30. G. Beck: in Edelmetall-Taschenbuch, A.G. Degussa, ed., Hüthig-Verlag, Heidelberg, 1995, pp. 219–26.
31. U. Glatzel and M. Feller-Kniepmeier: Scripta Metall., 1989, vol. 23, pp. 1839–44.10.1016/0036-9748(89)90468-7 ↗
32. R. Völkl, U. Glatzel, and M. Feller-Kniepmeier: Acta Mater., 1998, vol. 46 (12), pp. 4395–4404.10.1016/S1359-6454(98)00085-8 ↗
33. L. Müller, U. Glatzel, and M. Feller-Kniepmeier: Acta Metall. Mater., 1993, vol. 41 (12), pp. 3401–11.10.1016/0956-7151(93)90220-M ↗
34. C.T. Sims, N.S. Stoloff, and W.C. Hagel: Superalloys II: High Temperature Materials for Aerospace and Industrial Power, Wiley-Interscience, New York, NY, 1987, pp. 61–95.