journal article·2002-12

Rapid solidification of martensitic stainless steel atomized droplets

N. H. Pryds, A. S. Pedersen

Publisher page

Abstract

The microstructure of martensitic stainless steel powders produced by inert gas atomization was investigated. Depending upon the powder particle size, the microstructure was found to exhibit a cellular, dendritic, or martensitic morphology. Relationships between the microstructure scale and the particle diameter were identified. It was found that at a critical particle diameter of 25 to 30 µm, the structure changed from cellular/dendritic (96.5 vol pct bcc and 3.5 vol pct fcc) to martensite. The solidification path of the powder particles below and above 25 to 30 µm in size was considered. High-temperature X-ray diffraction (HTXRD) measurements revealed that there is a delay in the appearance of the fcc phase for the small particle size. The delay in the appearance of the fcc phase is a result of different nucleation sites for the fcc phase between the large and the small particle size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Solidification and crystal growth phenomena · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. W.J. Boettinger: Mater. Sci. Eng., 1988, vol. 98, pp. 123–30.10.1016/0025-5416(88)90140-1 ↗
2. J.H. Perepezko: in Rapidly Solidified Amorphous and Crystalline Alloys, Materials Research Society Symposia Proceedings, B.H. Kear and B.C. Giessen, eds., Materials Research Society, Pittsburgh, PA, 1982, pp. 1–15.
3. J.H. Perepezko: Mater. Sci. Eng., 1994, vols. A179–A180, pp. 52–56.10.1016/0921-5093(94)90163-5 ↗
4. M.C. Flemings and Y. Shiohara: Mater. Sci. Eng., 1984, vol. 65, pp. 157–70.10.1016/0025-5416(84)90209-X ↗
5. N. Tiedje: Ph.D. Thesis, Risø National Laboratory, Roskilde, Denmark, 1994.
6. R.N. Wright, J.C. Bae, T.F. Kelly, J.E. Flinn, and G.E. Korth: Metall. Trans. A, 1988, vol. 19A, pp. 2399–405.10.1007/BF02645467 ↗
7. T.F. Kelly, M. Cohen, and J.B. Vander Sande: Metall. Trans. A, 1984, vol. 15A, pp. 819–33.10.1007/BF02644556 ↗
8. D.G. MacIsaac, Y. Shiohara, M.G. Chu, and M.C. Flemings: Proc. Conf. on Grain Refinement in Casting and Welds, G.J. Abbaschian and S.A. David, eds., TMS-AIME, Warrendale, PA, 1983, pp. 87–95.
9. G. Frommeyer: Z. Metallkd., 1985, vol. 76, pp. 662–68.
10. W. Löser and T. Volkmann: Int. Symp. on Metastable, Mechanical Alloyed and Nonocrystalline Materials (ISMANAM), Quebec, Canada, July 24–28, 1995.
11. W. Löser and D.M. Herlach: Metall. Trans. A, 1992, vol. 23A, pp. 1585–91.10.1007/BF02647340 ↗
12. H. Jones: in Science and Technology of the Undercooled Melt, P.R. Sahm, H. Jones, and C.M. Adam, eds., Martinus NIJHOFF, Schloss Theuern (Germany), 1985, pp. 156–84.
13. N.J. Grant: J. Met., 1983, vol. 35 (1), pp. 20–27.
14. N.H. Pryds and X. Huang: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 3155–66.10.1007/s11661-000-0095-1 ↗
15. N.H. Pryds, J.H. Hattel, and J. Thorborg: Modelling Simul. Mater. Sci. Eng., 1999, vol. 7, pp. 431–46.10.1088/0965-0393/7/3/310 ↗
16. C.F. Jatczac, J.A. Larson, and S.W. Shine: in Retained Austenite and Its Measurements by X-Ray Diffraction, Society of Automotive Engineers, Warrendale, PA, 1980.
17. W.E. Ranz and W.R. Marshall, Jr.: Chem. Eng. Prog., 1952, vol. 48, pp. 173–80.
18. W.J. Boettinger and J.H. Perepezko: in Rapidly Solidified Crystalline Alloys, S.K. Das, B.H. Kear, and C.M. Adam, eds., Martinus NIJHOFF, Schloss Theuern (Germany), 1985, pp. 21–58.
19. J.H. Perepezko: in Science and Technology of the Undercooled Melt, P.R. Sahm, H. Jones, and C.M. Adams, eds, Martinus NIJHOFF, Schloss Theuern (Germany), 1985, pp. 29–51.
20. D.M. Herlach: Mater. Sci. Eng., 1994, vol. R12, pp. 177–272.10.1016/0927-796X(94)90011-6 ↗
21. J.V. Bee and J.V. Wood: Met. Sci., 1982, vol. 16, pp. 268–74.10.1179/msc.1982.16.5.268 ↗
22. M. Norell, L. Nyborg, and I. Olefjord: Powder Metallurgy World Congress, MPIF, San Francisco, CA, 1992, pp. 1–14.
23. G. Thewlis: Mater. Sci. Technol., 1994, vol. 10 (2), pp. 110–25.10.1179/mst.1994.10.2.110 ↗