Matrix Dissolution Techniques Applied to Extract and Quantify Precipitates from a Microalloyed Steel
Source abstract
Abstract
Microalloyed steels possess good strength and toughness, as well as excellent weldability; these attributes are necessary for oil and gas pipelines in northern climates. These properties are attributed in part to the presence of nanosized carbide and carbonitride precipitates. To understand the strengthening mechanisms and to optimize the strengthening effects, it is necessary to quantify the size distribution, volume fraction, and chemical speciation of these precipitates. However, characterization techniques suitable for quantifying fine precipitates are limited because of their fine sizes, wide particle size distributions, and low volume fractions. In this article, two matrix dissolution techniques have been developed to extract precipitates from a Grade100 (yield strength of 690 MPa) microalloyed steel. Relatively large volumes of material can be analyzed, and statistically significant quantities of precipitates of different sizes are collected. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) are combined to analyze the chemical speciation of these precipitates. Rietveld refinement of XRD patterns is used to quantify fully the relative amounts of the precipitates. The size distribution of the nanosized precipitates is quantified using dark-field imaging in the TEM.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. D. Bai, M.A. Cooke, J. Asante, and J. Dorricott: Patent US 6,682,613 B2, 2004.
2. S. Wolf: JOM, 1967, vol. 19, pp. 22-28.10.1007/BF03378581 ↗
3. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, UK, 1997.
4. K. Poorhaydari-Anaraki: Ph.D. Dissertation, University of Alberta, Alberta, Canada, 2005.
5. A.J. DeArdo: Int. Mater. Rev., 2003, vol. 48, no. 6, pp. 371-402.10.1179/095066003225008833 ↗
6. S. Akhlaghi and D.G. Ivey: Can. Metall. Q., 2002, vol. 41, no. 1, pp. 111-19.10.1179/cmq.2002.41.1.111 ↗
7. R. Lagneborg, T. Siwecki, S. Zajac, and B. Hutchinson: Scand. J. Metall., 1999, vol. 28, no. 5, pp. 186-241.
8. U. Lagerpusch, B. Anczykowski, and E. Nembach: Phil. Mag. A, 2001, vol. 81, no. 11, pp. 2613-28.10.1080/01418610108216658 ↗
9. M.G. Burke and M.K. Miller: J. Electron Microsc. Tech., 1988, vol. 8, pp. 201-10.10.1002/jemt.1060080207 ↗
10. K. Stiller and M. Hattestrand: Microsc. Microanal., 2004, vol. 10, pp. 341-48.10.1017/S1431927604040498 ↗
11. J. Lu: Ph.D. Dissertation, University of Alberta, Alberta, Canada, 2009.
12. J. Chakraborty, D. Bhattacharjee, and I. Manna: Scripta Mater., 2008, vol. 59, pp. 247-50.10.1016/j.scriptamat.2008.03.023 ↗
13. J. Chakraborty, D. Bhattacharjee, and I. Manna: Scripta Mater., 2009, vol. 61, pp. 604-07.10.1016/j.scriptamat.2009.05.035 ↗
14. W. Huang: Metall. Trans. A, 1991, vol. 22A, pp. 1911-20.10.1007/BF02669859 ↗
15. L.E. Collins, M.J. Godden, and J.D. Boyd: Can. Metall. Q., 1983, vol. 22, no. 2, pp. 169-79.10.1179/cmq.1983.22.2.169 ↗
16. V.B. Ginzburg: Metallurgical Design of Flat Rolled Steels, Marcel Dekker Inc., New York, NY, 2005.
17. F.G. Wilson and T. Gladman: Int. Mater. Rev., 1988, vol. 33, no. 5, 211-86.
18. S. Dawson, N.D.G. Mountford, I.D. Sommerville, and A. McLean: Ironmaking Steelmaking, 1988, vol. 15, no. 10, pp. 54-55.
19. ASTM E194-90, “Standard Test Method for Acid-Insolute Content of Copper and Iron Powders”, 1990, pp. 1–2.
20. “Physical Constants of Inorganic Compounds”, CRC Handbook of Chemistry and Physics, Knovel, Binghamton, NY, 2004.
21. Y. Yoshida, H. Yoshiko, I. Kanji, and K. Yoshikazu: Kawasaki Steel Giho, 1980, vol. 12, no. 4, pp. 653-64.
22. H.M. Rietveld: Acta Crystallogr., 1967, vol. 22, pp. 151-52.10.1107/S0365110X67000234 ↗
23. H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65-71.10.1107/S0021889869006558 ↗
24. R.J. Hill and C.J. Howard: J. Appl. Crystallogr., 1987, vol. 20, pp. 467-74.10.1107/S0021889887086199 ↗
25. S.G. Hong, K.B. Kang, and C.G. Park: Scripta Mater., 2002, vol. 46, no. 2, pp. 163-68.10.1016/S1359-6462(01)01214-3 ↗
26. JCPDS: International Center for Diffraction Data, Newtown Square, PA, 1996, PDF#00-038-1420, PDF#00-032-1383, PDF#00-038-1155, PDF#00-039-1425, and PDF#00-038-1364.
27. E.L. Brown and A.J. DeArdo: Proc. Int. Conf. on the Thermomechanical Processing of Microalloyed Austenite. A.J. DeArdo, G.A. Ratz, and P.J. Wray, eds., AIME, Warrendale, PA, 1982, pp. 319–41.
28. S. Kanazawa, A. Nakashima, K. Okamoto, K. Tanabe, and S. Nakazawa: Trans. Jpn. Inst. Met., 1967, vol. 8, no. 2, pp. 113-19.10.2320/matertrans1960.8.113 ↗
29. W.R. Bandi: Science, 1977, vol. 196, no. 4286, pp. 136-42.10.1126/science.196.4286.136 ↗
30. W.D. Callister: Materials Science and Engineering: An Introduction, 5th ed., Wiley, New York, NY, 2000.10.1108/acmm.2000.12847aae.001 ↗