Carbides in high-speed steels containing silicon
Source abstract
Abstract
The effects of silicon additions up to 3.5 wt pct on the as-cast carbides, as-quenched carbides, and as-tempered carbides of high-speed steels W3Mo2Cr4V, W6Mo5Cr4V2, and W9Mo3Cr4V were investigated. In order to further understand these effects, a Fe-16Mo-0.9C alloy was also studied. The results show that a critical content of silicon exists for the effects of silicon on the types and amount of eutectic carbides in the high-speed steels, which is about 3, 2, and 1 wt pct for W3Mo2Cr4V, W6Mo5Cr4V2, and W9Mo3Cr4V, respectively. When the silicon content exceeds the critical value, the M2C eutectic carbide almost disappears in the tested high-speed steels. Silicon additions were found to raise the precipitate temperature of primary MC carbide in the melt of high-speed steels that contained d-ferrite, and hence increased the size of primary MC carbide. The precipitate temperature of primary MC carbide in the high-speed steels without d-ferrite, however, was almost not affected by the addition of silicon. It is found that silicon additions increase the amount of undis-solved M6C carbide very obviously. The higher the tungsten content in the high-speed steels, the more apparent is the effect of silicon additions on the undissolved M6C carbides. The amount of MC and M2C temper precipitates is decreased in the W6Mo5Cr4V and W9Mo3Cr4V steels by the addition of silicon, but in the W3Mo2Cr4V steel, it rises to about 2.3 wt pct.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. M. Boccalini and H. Goldenstein: Int. Mater. Rev., 2001, vol. 46, pp. 92–115.10.1179/095066001101528411 ↗
2. B. Mills: J. Mater. Processing Technol., 1996, vol. 56, pp. 16–23.10.1016/0924-0136(95)01816-6 ↗
3. K.C. Hwang, S. Lee, and H.C. Lee: Mater. Sci. Eng. A, 1998, vol. A254, pp. 282–95.10.1016/S0921-5093(98)00626-1 ↗
4. F. Pan, A. Tang, J. Zhang, P. Ding, and Q. Yun: J. Iron Steel Res. Int., 1999, vol. 6, pp. 33–38.
5. P. Ding, G. Shi, and S. Zhou: Metall. Trans. A, 1993, vol. 24A, pp. 1265–72.10.1007/BF02668195 ↗
6. L.A. Dobrzanski and M. Ligarski: J. Mater. Process. Technol., 1997, vol. 64, pp. 101–16.10.1016/S0924-0136(96)02558-7 ↗
7. L.A. Dobrzanski and A. Zarychta: J. Mater. Process. Technol., 1998, vol. 77, pp. 180–93.10.1016/S0924-0136(97)00416-0 ↗
8. M.J. Godden and J. Beech: J. Iron Steel Inst., 1970, vol. 208, pp. 168–73.
9. T. Mukherjee and D.J. Dyson: J. Iron Steel Inst., 1972, vol. 210, pp. 203–08.
10. H. Brands, E. Haberling, R. Ortthann, and H.H. Weigand: Thyssen Edelst. Techn. Ber., 1977, vol. 3, pp. 81–90.
11. H. Fredriksson and M. Nica: Scand. J. Met., 1979, vol. 8, pp. 243–53.
12. G. Guo: High Speed Steels and Heat Treatment, 1st ed., Mechanical Industry Press, Beijing, 1985, pp. 349–90.
13. F. Pan, S. Zhou, P. Ding, and G. Shi: Iron Steel Sinica, 1990, vol. 25, pp. 38–42.
14. F. Pan, P. Ding, and S. Zhou: Mater. Sci. Progr., 1990, vol. 4, pp. 498–503.
15. P. Ding, S. Zhou, and F. Pan: Iron Steel Sinica, 1987, vol. 22, pp. 37–41.
16. P. Ding, F. Pan, and S. Zhou: Acta Metall. Sinica, 1987, vol. 23, pp. 285–90.
17. H Wisell: Metall. Trans. A, 1991, vol. 21A, pp. 1391–405.10.1007/BF02660671 ↗
18. F. Pan, S. Zhou, P. Ding, and D.V. Edmonds: Scripta Metall. Mater., 1992, vol. 27, pp. 1145–50.10.1016/0956-716X(92)90589-7 ↗
19. F. Pan, P. Ding, S. Zhou, M. Kang, and D.V. Edmonds: Acta Mater., 1997, vol. 45, pp. 4703–12.10.1016/S1359-6454(97)00121-3 ↗
20. B. Sundman, B. Jansson, and J.O. Anderson: CALPHAD, 1985, vol. 9, pp. 153–58.10.1016/0364-5916(85)90021-5 ↗
21. J. Golczewski and H.F. Fischmeister: Steel Res., 1992, vol. 63, pp. 354–60.10.1002/srin.199200534 ↗
22. D.M. Vanderwalker: Metall. Trans. A, 1987, vol. 18A, pp. 1191–94.10.1007/BF02647188 ↗
23. H.M. Lee, S.M. Allen, and M. Grujicic: Metall. Trans. A, 1991, vol. 22A, pp. 2869–76.10.1007/BF02650248 ↗
24. W. Sha, A. Cerezo, and G.D.W. Smith: J. Phys., 1989, vol. 50, p. 407.
25. W. Sha, A. Cerezo, and G.D.W. Smith: Surf. Sci., 1987, vol. 246, pp. 278–84.10.1016/0039-6028(91)90427-T ↗
26. H.F. Fischmeister, S. Karagoz, and H.O. Andern: Acta Mater., 1988, vol. 36, pp. 817–25.10.1016/0001-6160(88)90136-8 ↗
27. P. Ding and S. Zhou: J. Chongqing Univ., 1984, vol. 7, pp. 121–27.
28. O. Kubaschewski and C.B. Alcock: Metallurgical Thermochemistry, 5th ed., Pergamon Press, Oxford, United Kingdom, 1975, pp. 380–96.
29. S. Karagoz, I. Lien, E. Bischoff, and H.F. Fischmeister: Metall. Trans. A., 1989, vol. 20A, pp. 2695–2701.10.1007/BF02670163 ↗
30. S. Karagoz, R. Riedl, M.R. Gregg, and H.F. Fischmeister: Pract. Metallorg., 1983, vol. 14, pp. 269–82.